1. Product Overview
The GARDENA 3000/4 Eco Classic Booster Group is a domestic pump designed for efficient water supply in your home or garden. This robust unit features a powerful 650 W motor, delivering a flow rate of up to 2,800 liters per hour. It is equipped with essential safety and functionality features, including dry run protection to prevent damage when water levels are low, and a built-in check valve to maintain prime and prevent backflow. The system is designed for easy integration into existing water systems with its three connection points.

This image shows the GARDENA 3000/4 Eco Classic Booster Group pump, featuring its compact design and connection points. The pump is designed for domestic water supply, with integrated dry run protection and a check valve.
2. Safety Instructions
Before operating the GARDENA 3000/4 Eco Classic Booster Group, carefully read and understand all safety instructions. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Electrical Safety: Ensure the pump is connected to a properly grounded 230 Volt power outlet. Do not operate the pump with damaged cables or plugs. Avoid using extension cords unless absolutely necessary and ensure they are rated for outdoor use and the pump's power requirements.
- Water Safety: Do not use the pump for flammable, corrosive, or explosive liquids. The pump is designed for clear water. Protect the pump from frost.
- Installation: Install the pump on a stable, level surface. Ensure adequate ventilation around the pump. Keep children and pets away from the operating pump.
- Maintenance: Always disconnect the pump from the power supply before performing any maintenance or cleaning.
3. Package Contents
The GARDENA 3000/4 Eco Classic Booster Group package typically includes:
- GARDENA 3000/4 Eco Classic Domestic Pump
- Integrated Dry Run Protection
- Integrated Check Valve
- 3 Connectors for various hose sizes
- Instruction Manual
4. Setup
Proper setup is crucial for the optimal performance and longevity of your GARDENA Booster Group.
- Placement: Position the pump on a firm, level, and dry surface, as close as possible to the water source. Ensure it is protected from direct weather exposure and frost.
- Suction Line Connection: Connect a suitable suction hose (not included) to the pump's suction inlet. Ensure all connections are airtight to prevent air from entering the system, which can impair pump performance. Use the provided connectors as needed.
- Pressure Line Connection: Connect the pressure hose or pipe to the pump's pressure outlet. Ensure this connection is also secure.
- Priming the Pump: Before initial operation, the pump housing must be filled completely with water through the designated filling opening until no more air escapes. This step is vital for the pump to create suction.
- Electrical Connection: Once all water connections are secure and the pump is primed, connect the pump's corded electric plug to a grounded 230 Volt power outlet.
5. Operating Instructions
Follow these steps for safe and effective operation of your booster group.
- Starting the Pump: After ensuring the pump is primed and all connections are secure, plug the pump into the power outlet. The pump will start automatically and build up pressure.
- Automatic Operation: The GARDENA 3000/4 Eco Classic Booster Group is designed for automatic operation. It will switch on when water is drawn (e.g., opening a tap) and switch off when water flow stops, maintaining system pressure.
- Dry Run Protection: The integrated dry run protection feature will automatically shut off the pump if there is no water in the suction line, preventing damage to the motor. If this occurs, disconnect the power, check the water source, re-prime the pump, and then restart.
- Stopping the Pump: To stop the pump manually, simply unplug it from the power outlet. For extended periods of non-use, it is recommended to disconnect the power and drain the pump.
6. Maintenance
Regular maintenance ensures the longevity and reliable performance of your GARDENA pump.
- Cleaning: Periodically clean the exterior of the pump with a damp cloth. Do not use harsh detergents or solvents.
- Filter Check: If your system includes a pre-filter (not included with the pump itself but often used in conjunction), check and clean it regularly to prevent blockages and maintain flow rate.
- Frost Protection: During winter months or when temperatures drop below freezing, disconnect the pump, drain all water from the pump and hoses, and store it in a frost-free location. Residual water can freeze and damage the pump components.
- Connections: Periodically inspect all hose and pipe connections for leaks or signs of wear. Tighten or replace as necessary.
7. Troubleshooting
Refer to this section for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump does not start | No power supply; Dry run protection activated; Motor fault | Check power connection and fuse; Check water level in source and re-prime; Contact service if motor fault suspected. |
| Low pressure or no water delivery | Pump not primed; Air in suction line; Suction line blocked; Water source empty | Re-prime the pump; Check all suction line connections for leaks; Clean suction filter; Check water source. |
| Pump runs continuously | Leak in pressure system; Check valve malfunction | Inspect all pressure lines and connections for leaks; Check or replace the integrated check valve. |
| Unusual noise during operation | Air in pump; Foreign object in pump; Pump not securely mounted | Re-prime the pump; Disconnect power and inspect impeller for obstructions; Secure pump to a stable surface. |
8. Specifications
| Feature | Specification |
|---|---|
| Brand | Gardena |
| Model Number | 01753-20 |
| Motor Power | 650 W |
| Flow Rate | 2,800 L/H |
| Voltage | 230 Volts |
| Power Source | Corded Electric |
| Item Weight | 16.245 kg (16245 Grams) |
| Product Dimensions | 47.8 x 30.8 x 65 cm |
| ASIN | B00FGRYMMO |
| Global Trade Identification Number | 04078500175302 |
9. Warranty and Support
GARDENA products are manufactured to high-quality standards and come with a manufacturer's warranty. The specific warranty period and terms may vary by region. Please retain your proof of purchase for warranty claims.
For technical support, spare parts, or warranty inquiries, please contact your local GARDENA service center or visit the official GARDENA website. Always provide the model number (01753-20) and ASIN (B00FGRYMMO) when seeking support.

An illustration featuring the Gardena Pumps logo and the text 'JAHRE YEARS ANS', which translates to 'YEARS' in multiple languages, suggesting the brand's experience or a warranty period for its pump products.





