Product Overview
The SANGEAN PR-D18 is a compact and versatile AM/FM portable digital radio designed for clear audio reception and ease of use. It features a durable protective bumper, an easy-to-read backlit LCD display, and multiple power options, making it suitable for various environments, from home to outdoor activities.
Figure 1: Front view of the SANGEAN PR-D18 radio, showcasing its white and grey design with the digital display and control buttons.
Key Features:
- 10 station presets (5 FM, 5 AM) for quick access to your favorite stations.
- Adjustable tuning steps and auto-seek functionality for easy station finding.
- Dual alarm timer with options to wake by radio (Humane Wake System) or buzzer.
- Easy-to-read LCD display with backlight for visibility in various lighting conditions.
- Built-in lock switch to prevent accidental button presses.
- Battery power status indication for convenient monitoring.
- Operates on 4 AA batteries for portability or an optional AC adapter for continuous power.
- Headphone jack for private listening.
Setup
1. Powering the Radio:
The PR-D18 can be powered by four (4) AA batteries (not included) or an optional AC adapter (not included, Sangean Factory Approved Switching AC Adapter (100-240V, 50/60Hz) model # ADP-PR-D18 sold separately).
Battery Installation:
- Locate the battery compartment on the back of the radio.
- Open the battery compartment cover.
- Insert four (4) AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Close the battery compartment cover securely.
Figure 2: Rear view of the SANGEAN PR-D18, illustrating the battery compartment for AA batteries.
AC Adapter Connection (Optional):
If using an AC adapter, plug the adapter into the DC IN jack on the side of the radio and then into a standard wall outlet. The radio will automatically switch to AC power when connected.
2. Antenna Adjustment:
For optimal FM reception, extend the telescopic antenna fully. For AM reception, the radio has a built-in ferrite bar antenna, so simply orient the radio for the best signal.
Operating Instructions
1. Power On/Off:
- Press the POWER button (red button) located on the top right of the control panel to turn the radio on or off.
2. Display Modes:
- Press the DISPLAY button to toggle between displaying the current time and the radio frequency.
3. Setting Time:
- With the radio off, press and hold the DISPLAY button until the hour digits flash.
- Use the UP (▲) and DOWN (▼) arrow buttons to adjust the hour.
- Press the DISPLAY button again to switch to minute adjustment.
- Use the UP (▲) and DOWN (▼) arrow buttons to adjust the minutes.
- Press the DISPLAY button one more time to confirm and save the time.
4. Setting Alarm:
- Press the ALARM button (bell icon) until the alarm time appears on the display.
- Use the UP (▲) and DOWN (▼) arrow buttons to set the desired alarm time.
- Press the ALARM button again to confirm.
- You can choose to wake to a radio station or a buzzer. The Humane Wake System (HWS) buzzer gradually increases in volume.
5. Tuning Radio Stations:
- Press the BAND button to switch between AM and FM bands.
- Use the UP (▲) and DOWN (▼) arrow buttons to manually tune to a desired frequency.
- For auto-seek, press and hold the UP (▲) or DOWN (▼) arrow buttons. The radio will scan and stop at the next strong station.
6. Setting Station Presets:
The radio allows for 5 AM and 5 FM station presets.
- Tune to the desired station.
- Press and hold one of the numbered preset buttons (1-5) until the display flashes, indicating the station has been saved to that preset.
- To recall a preset station, simply press the corresponding numbered button briefly.
7. Volume Control:
- Use the VOLUME + and VOLUME - buttons to adjust the audio level.
8. Headphone Use:
- Plug 3.5mm headphones into the headphone jack on the side of the radio for private listening. The external speaker will automatically mute.
9. Lock Switch:
- Slide the LOCK switch (located on the side) to prevent accidental button presses, useful during transport or when carrying the radio.
Figure 3: The SANGEAN PR-D18 radio positioned on a desk, demonstrating its compact size and suitability for various environments.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the radio's surface. Do not use abrasive cleaners or solvents.
- Battery Care: Remove batteries if the radio will not be used for an extended period to prevent leakage.
- Storage: Store the radio in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Batteries are dead or incorrectly inserted; AC adapter not connected properly. | Replace batteries or check AC adapter connection. |
| Poor radio reception | Antenna not extended; weak signal area; interference. | Extend FM antenna fully; re-orient radio for AM; move away from electronic devices causing interference. |
| Alarm not sounding | Alarm not set correctly; volume too low. | Verify alarm settings and ensure volume is adequate. |
| Buttons unresponsive | Lock switch is engaged. | Disengage the lock switch. |
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 6.54 x 1.59 x 4.26 inches (L x W x H) |
| Item Weight | 12.8 ounces |
| Model Number | PR-D18GR |
| Power Source | 4 AA Batteries (not included), Corded Electric (AC Adapter not included) |
| Tuner Technology | AM/FM Digital |
| Output Wattage | 1.0 watts |
| Included Components | Owner's Manual |
Figure 4: Dimensions of the SANGEAN PR-D18 radio, showing its compact and portable size.
Warranty and Support
This product comes with an Owner's Manual. For specific warranty information and technical support, please refer to the documentation included with your product or visit the official Sangean website. Contact information for Sangean support can typically be found in the Owner's Manual or on their corporate website.
For further assistance, please visit the Sangean Store on Amazon.