Introduction
Thank you for choosing the CoolWorks 6-inch Table/Clip Fan. This compact and versatile fan is designed to provide personal cooling with whisper-quiet operation. Its lightweight design and built-in carry handle make it easy to move and position wherever needed. This manual provides important information for the safe and efficient use of your fan.
Figure 1: Front view of the CoolWorks 6-inch Table/Clip Fan. This image shows the fan's circular grill, blades, and the base which can be used for tabletop placement or converted to a clip.
Important Safety Instructions
Please read and save these important safety instructions before using this fan. Failure to comply with these instructions may result in electric shock, fire, or injury.
- Always unplug the fan from the power outlet before cleaning, servicing, or moving it.
- Do not operate the fan with a damaged cord or plug. If the cord or plug is damaged, contact a qualified electrician for repair or replacement.
- Do not run the power cord under carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Arrange the cord away from traffic areas where it will not be tripped over.
- This fan is intended for indoor use only. Do not use outdoors or in wet locations.
- Do not immerse the fan in water or other liquids.
- Do not insert fingers or foreign objects into any openings of the fan.
- Close supervision is necessary when any appliance is used by or near children.
- Do not operate the fan near windows, where rain may come into contact with it.
- Ensure the fan is placed on a stable, flat surface when used as a table fan, or securely clipped when used as a clip fan.
Package Contents
Upon opening the package, please ensure all items are present and in good condition. The CoolWorks 6-inch Table/Clip Fan comes fully assembled.
- CoolWorks 6-inch Table/Clip Fan (Model F-0645)
- Instruction Manual (this document)
Setup
The CoolWorks 6-inch Table/Clip Fan requires no assembly. Simply choose your desired placement method:
Tabletop Use:
- Place the fan on a flat, stable, and level surface.
- Ensure there is adequate space around the fan for proper air circulation.
Clip-On Use:
- Locate a sturdy surface or object (e.g., desk edge, shelf) that the fan's clip can securely grip.
- Open the clip by pressing the two handles together.
- Attach the fan securely to the desired surface, ensuring it is stable and will not fall.
Once positioned, plug the fan's power cord into a standard electrical outlet (120V AC, 60Hz).
Operating Instructions
Operating your CoolWorks fan is straightforward:
- Ensure the fan is securely placed or clipped and plugged into a suitable power outlet.
- Locate the power switch, typically on the back or base of the fan.
- Turn the switch to the "ON" position to start the fan.
- To turn the fan off, switch it to the "OFF" position.
The fan provides a consistent airflow for personal cooling. There are no additional speed settings or oscillation features on this model.
Maintenance
Regular cleaning will help maintain the performance and appearance of your fan.
- Always unplug the fan before cleaning.
- Use a soft, damp cloth to wipe the exterior surfaces of the fan. Do not use abrasive cleaners or solvents.
- To clean dust from the fan blades and grill, use a vacuum cleaner with a brush attachment or compressed air. Do not attempt to disassemble the fan for cleaning.
- Ensure the fan is completely dry before plugging it back in and operating.
Store the fan in a cool, dry place when not in use.
Troubleshooting
If you experience issues with your CoolWorks fan, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on. | Not plugged in; Power switch is off; No power at outlet. | Ensure fan is securely plugged into a working outlet; Turn power switch to "ON"; Check household circuit breaker or try another outlet. |
| Fan makes unusual noise. | Dust accumulation; Fan not on a stable surface. | Unplug and clean the fan as per maintenance instructions; Ensure fan is on a stable, flat surface or securely clipped. |
| Reduced airflow. | Dust accumulation on grill or blades. | Unplug and clean the fan grill and blades. |
If the problem persists after attempting these solutions, please contact CoolWorks customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | F-0645 |
| Brand | CoolWorks |
| Type | Table/Clip Fan |
| Blade Diameter | 6 inches |
| Power Source | Corded Electric |
| Blade Material | Plastic |
| Weight | Approximately 2 pounds (0.9 kg) |
| Special Features | Whisper quiet operation, Lightweight design, Built-in carry handle, No assembly required |
| UPC | 674465001553 |
Figure 2: The CoolWorks 6-inch Table/Clip Fan shown with approximate dimensions. The fan stands approximately 13 inches (31 cm) tall.
Warranty and Support
For warranty information or technical support, please contact the manufacturer, CoolWorks, directly. Refer to the product packaging or the CoolWorks official website for contact details.
Please have your model number (F-0645) and UPC (674465001553) available when contacting support.