Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Designers Fountain 13-inch 2-Light Flush Mount Ceiling Light, model 1257M-ORB-AL. Please read all instructions carefully before beginning installation and retain this manual for future reference.
This fixture is designed to provide interior illumination with a transitional style, featuring a durable steel construction and alabaster glass shade. It is suitable for various indoor spaces such as bedrooms, hallways, and utility areas.
Image: The Designers Fountain 13-inch 2-Light Flush Mount Ceiling Light, showcasing its oil rubbed bronze finish and white alabaster glass shade.
Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Contact a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- This fixture is intended for indoor use only and is rated for damp locations. Do not install in areas exposed to direct water spray.
- Ensure the mounting surface can support the weight of the fixture.
- Do not exceed the maximum wattage specified for the bulbs.
- Always wear safety glasses during installation.
Package Contents
Verify that all components are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer service for assistance.
- Lighting Fixture (1)
- Alabaster Glass Shade (1)
- Mounting Hardware Kit (1)
- Instruction Manual (1)
Note: Bulbs are not included. This fixture requires two E26 base, 60-watt maximum incandescent or LED bulbs.
Specifications
| Feature | Detail |
|---|---|
| Brand | DESIGNERS FOUNTAIN |
| Model Number | 1257M-ORB-AL |
| Dimensions (L x W x H) | 13.2" x 13.2" x 5.2" |
| Weight | 3.7 Pounds |
| Material | Alloy Steel, Glass |
| Finish | Oil Rubbed Bronze |
| Shade Material | Alabaster Glass |
| Number of Lights | 2 |
| Bulb Base | E26 (Medium Base) |
| Max Wattage per Bulb | 60 Watts (Incandescent or LED) |
| Voltage | 120 Volts |
| Installation Type | Flush Mount |
| Indoor/Outdoor Usage | Indoor |
| Special Features | Dimmable, Frosted Glass, Damp Location Rated |
Image: Technical specifications and features, including dimensions (13.25 inches wide, 5.25 inches high), bulb type (2 x 60W E26, not included), dampness rating for indoor use, and dimming capability.
Setup and Installation
Tools Required: Phillips screwdriver, flathead screwdriver, wire strippers, electrical tape, safety glasses.
- Turn Off Power: Before starting, ensure the power to the circuit is turned off at the main electrical panel (circuit breaker or fuse box).
- Prepare Mounting Surface: If replacing an existing fixture, carefully remove it. Ensure the junction box is securely mounted and capable of supporting the fixture's weight.
- Attach Mounting Bracket: Secure the mounting bracket (included in hardware kit) to the junction box using the provided screws. Ensure the bracket is flush against the ceiling.
- Make Electrical Connections:
- Connect the green or bare copper ground wire from the fixture to the ground wire from the junction box (usually bare copper or green). Secure with a wire nut.
- Connect the white wire from the fixture to the white (neutral) wire from the junction box. Secure with a wire nut.
- Connect the black wire from the fixture to the black (hot) wire from the junction box. Secure with a wire nut.
Ensure all wire connections are tight and secure. Wrap electrical tape around wire nuts for added security.
- Mount Fixture Body: Carefully align the fixture body with the mounting bracket and secure it using the provided screws or decorative nuts. Ensure the fixture is firmly attached to the ceiling.
- Install Bulbs: Screw two E26 base, 60-watt maximum incandescent or LED bulbs (not included) into the sockets. Do not overtighten.
- Attach Glass Shade: Carefully place the alabaster glass shade onto the fixture. Secure it using the decorative finial or retaining ring provided. Ensure the shade is stable and centered.
- Restore Power: Turn the power back on at the main electrical panel. Test the light fixture to ensure proper operation.
Image: The ease of installation for the Designers Fountain ceiling light, highlighting that mounting hardware is included. A visual comparison shows the improved illumination in a room after installation.
Operating Instructions
This fixture operates like any standard ceiling light. Once installed and powered, it can be turned on and off using a wall switch. If connected to a compatible dimmer switch, the light output can be adjusted from 10% to 100%.
Bulb Replacement
- Turn Off Power: Always disconnect power at the circuit breaker before replacing bulbs.
- Allow to Cool: Allow bulbs to cool completely before touching them.
- Remove Shade: Carefully unscrew the decorative finial or retaining ring and remove the glass shade.
- Replace Bulbs: Unscrew the old bulbs and screw in new E26 base, 60-watt maximum incandescent or LED bulbs.
- Reattach Shade: Carefully reattach the glass shade and secure it with the finial or retaining ring.
- Restore Power: Turn power back on and test the fixture.
Maintenance
Regular cleaning will help maintain the appearance and performance of your light fixture.
- Cleaning: Always ensure the power is off and the fixture is cool before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or glass.
- Glass Shade: The alabaster glass shade can be removed for more thorough cleaning. Wash with mild soap and water, rinse thoroughly, and dry completely before reattaching.
- Inspection: Periodically inspect the wiring and connections for any signs of wear or damage. If any issues are found, consult a qualified electrician.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | 1. Power is off 2. Loose wiring connections 3. Faulty bulb 4. Faulty wall switch | 1. Check circuit breaker/fuse. 2. Verify all wire connections are secure (with power off). 3. Replace bulb(s). 4. Test or replace wall switch. |
| Light flickers | 1. Loose bulb 2. Loose wiring connection 3. Incompatible dimmer switch 4. Faulty bulb | 1. Tighten bulb(s). 2. Check wiring connections (with power off). 3. Ensure dimmer is compatible with bulb type. 4. Replace bulb(s). |
| Glass shade is loose | Finial or retaining ring not tightened | Carefully tighten the finial or retaining ring until the shade is secure. |
Warranty and Support
All products purchased are covered by a 30-day replacement parts policy to ensure a fully working item. Additionally, all products are covered under a 1-year warranty when purchased on Amazon. The warranty period begins on the day the product is originally shipped.
The warranty covers all items and conditions identified in the original manufacturer's warranty. Items specifically not covered by the warranty include loss and theft, water damage, customer abuse, and finish deterioration due to UV or coastal exposure.
For warranty claims or technical support, please contact Designers Fountain customer service through the retailer where the product was purchased or visit the official Designers Fountain website for contact information.