1. Product Overview
The Philips Advance Xitanium LED Driver (Model: LEDINTA0700C210DOM) is a high-performance, low-maintenance LED electronic driver designed for various lighting applications. It ensures reliable operation across a wide range of temperatures and electrical conditions, providing stable power output for LED light sources. This driver features 0-10V dimming capabilities, allowing for flexible light control.
Figure 1: Philips Advance Xitanium LED Driver, showing its compact black casing, input/output wiring, and product label with specifications and certifications.
2. Safety Information
Please read all instructions carefully before installation and operation. Installation should be performed by a qualified electrician in accordance with all applicable national and local electrical codes. Disconnect power before installing or servicing. Do not operate the driver if it is damaged. Ensure proper grounding to prevent electrical shock.
3. Setup and Installation
This LED driver is designed for easy integration into compatible lighting systems. Ensure the mounting surface is stable and can support the driver's weight. The driver is suitable for dry and damp locations.
3.1 Wiring Instructions
Refer to the wiring diagram on the product label and below for correct connections. All wiring must comply with local electrical codes.
- Input (AC):
- Black Wire: Line (L)
- White Wire: Neutral (N)
- Output (DC):
- Red Wire: Positive (+)
- Blue Wire: Negative (-)
- 0-10V Dimming:
- Violet Wire: Positive (+)
- Gray Wire: Negative (-)
- Grounding: The case must be properly grounded.
Ensure all connections are secure and insulated. Do not exceed the maximum input or output specifications.
4. Operating Instructions
Once properly installed and wired, the LED driver will provide constant current output to the connected LED load. The 0-10V dimming function allows for brightness adjustment by connecting a compatible 0-10V dimmer to the violet (positive) and gray (negative) dimming wires. Ensure the dimmer is rated for 0-10V control.
5. Maintenance
The Philips Advance Xitanium LED Driver is designed for long-term, maintenance-free operation. There are no user-serviceable parts inside. Do not attempt to open or repair the unit. Keep the driver free from dust and debris to ensure proper heat dissipation. If the unit requires cleaning, disconnect power and wipe with a dry, soft cloth.
6. Troubleshooting
If the LED driver or connected lights are not functioning as expected, refer to the following table for common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| LEDs do not light up | No power to driver; Incorrect wiring; Faulty LED load | Check power supply; Verify all wiring connections; Test LED load separately |
| LEDs flicker or dim erratically | Loose connections; Incompatible dimmer; Overload | Secure all connections; Ensure 0-10V dimmer compatibility; Verify load is within driver specifications |
| Driver is hot to the touch | Insufficient ventilation; Overload | Ensure adequate airflow around driver; Reduce load if exceeding specifications |
If the problem persists after attempting these solutions, contact qualified service personnel.
7. Specifications
Detailed technical specifications for the Philips Advance Xitanium LED Driver:
| Parameter | Value |
|---|---|
| Model Number | LEDINTA0700C210DOM |
| Input Voltage | 120 - 277 VAC |
| Input Current | 1.4 - 0.6 AAC (0.67 ADC) |
| Input Power | 165 Watts |
| Output Voltage | 60 - 210 VDC |
| Output Current | 0.70 Amps (Constant Current) |
| Output Power | 150 Watts |
| Dimming Protocol | 0-10V Dimming |
| Frequency | 50/60 Hz |
| Product Dimensions | 9.5 x 2.5 x 1.5 inches |
| Weight | 2 Pounds |
| Mounting Type | Rack Mount |
| Certifications | cULus, RoHS Compliant |
| Max Case Temperature (Tc) | 80°C |
8. Warranty and Support
This Philips Advance Xitanium LED Driver comes with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Philips Lighting website. For technical support or service inquiries, please contact Philips customer service or your local distributor.
Philips Technical Information: 1.800.272.3331
For additional resources and product information, please visit the Philips Store on Amazon.