Scion PT206-52101-02 Black Carpet Floor Mat Instruction Manual

1. Introduction

Thank you for choosing the Genuine Scion Accessories Black Carpet Floor Mat set. This manual provides essential information for the proper installation, use, and maintenance of your new floor mats. These custom-tailored mats are designed to fit the Scion xB's floor pattern, protecting your vehicle's original carpet from wear and stains.

2. Safety Information

• Always ensure floor mats are properly secured and do not interfere with the operation of the accelerator, brake, or clutch pedals. Improperly installed floor mats can cause a safety hazard.
• Regularly check the mats for proper positioning.
• Do not stack floor mats on top of each other. Use only one set of floor mats at a time.

3. Package Contents

Your package should contain the following items:

• One (1) Driver's Side Front Carpet Floor Mat
• One (1) Passenger's Side Front Carpet Floor Mat
• Two (2) Rear Carpet Floor Mats

Image of the four-piece Scion carpet floor mat set, showing the driver's side, passenger's side, and two rear mats. The mats are black and feature an embroidered xB logo.

4. Setup and Installation

These floor mats are custom-fit for the 2011-2012 Scion xB automatic transmission floor plan. Follow these steps for proper installation:

1. Remove Existing Mats: Before installing new mats, remove any existing floor mats from your vehicle. Do not place new mats over old ones.
2. Clean Vehicle Floor: Ensure the vehicle's original carpet is clean and dry before placing the new mats.
3. Install Front Mats:
   • Identify the driver's side and passenger's side front mats. The driver's side mat typically has specific retention clips or holes.
   • Align the driver's side mat with the vehicle's floor anchors (if present) and press firmly to secure it. The mat is designed to fit precisely around the pedals.
   • Place the passenger's side front mat, ensuring it lies flat and does not obstruct any vehicle components.
4. Install Rear Mats: Place the two rear mats in the corresponding footwell areas. Ensure they lie flat and cover the carpeted area effectively.
5. Verify Fit: After installation, sit in the driver's seat and operate the accelerator, brake, and clutch pedals (if applicable) to ensure the mats do not interfere with their full range of motion. The aggressive no-slip backing helps keep the mats in position.

5. Operating (Usage)

Once properly installed, your Scion carpet floor mats will provide continuous protection for your vehicle's interior. They are designed to withstand daily use and help maintain the cleanliness and appearance of your original carpet.

6. Maintenance

To ensure the longevity and appearance of your carpet floor mats, follow these maintenance guidelines:

• Regular Cleaning: The mats are removable and easy to clean. Vacuum regularly to remove loose dirt and debris.
• Spot Cleaning: For spills or stains, use a mild carpet cleaner and a damp cloth. Blot the stain gently; do not rub vigorously.
• Deep Cleaning: Periodically, the mats can be removed and washed with a hose and mild detergent. Allow them to air dry completely before reinstalling them in the vehicle.
• Avoid Harsh Chemicals: Do not use bleach or strong chemical cleaners, as these can damage the carpet fibers and color.

7. Troubleshooting

• Mats do not fit correctly: Ensure you have the correct model year (2011-2012 Scion xB) and transmission type (automatic) for these mats. Verify that no other mats are underneath.
• Mats are shifting: Re-secure the mats, ensuring they are properly aligned with any floor anchors. Check for any obstructions underneath the mats that might prevent them from lying flat.

8. Specifications

9. Warranty and Support

This product is a genuine Scion accessory. For specific warranty information, please refer to the documentation provided with your vehicle or contact your authorized Scion dealer. For product support or inquiries, please contact the manufacturer or the retailer from whom you purchased the product.