KT-E08 Universal Remote for All Major Brands of Mini Split AC

Product Overview

Thank you for choosing the QUNDA KT-E08 Universal Remote. This product is designed to provide convenient control for your mini split air conditioner. The KT-E08 incorporates new patent technologies, offering a user-friendly experience suitable for all ages.

This universal air conditioner remote control is equipped with 6000 codes, making it compatible with approximately 98% of domestic and international air conditioners, including old and new types. It features a clock, timer on/off, and room temperature display.

Important Notes:

• This remote may not have all the functions of your original remote.
• The temperature display on this model is in Celsius degrees only. There is no option to switch to Fahrenheit.

Setup

Battery Installation

Insert two AAA (UM-4, R03) batteries into the battery compartment, ensuring correct polarity as indicated inside the cabin.

Code Input (Manual Search)

To program the remote, you can manually input a code from the provided code table:

1. Locate your air conditioner brand in the code table. Multiple code groups may be listed for each brand. Try the first group; if it does not work, proceed to the next. For example, for AUCMA, you might try 0288, then 0289 if needed.
2. Press the "SELECT" key. The code on the LCD screen will flash.
3. Enter the 4-digit code using the numeric keys. As you press each digit, the flashing will stop momentarily. Once all four digits are entered, the code input is complete.
4. Aim the remote at your air conditioner and press the "One Key" button. Check if the air conditioner responds. If it works, the setting is successful. If not, try another code group until it functions correctly.

Automatic Search

If you do not know your air conditioner's brand or if it is not listed in the code table, follow these steps:

1. Point the remote control towards your air conditioner. Press and hold the "SELECT" key for 5 seconds, then release. The remote will enter auto-search mode, continuously emitting signals. The code on the display will flash and increase.
2. When your air conditioner receives the signal and emits a buzzer sound, press any key on the remote to confirm the code.
3. Aim the remote at the air conditioner again and press the "One Key" button. If it works, the setting is successful. If not, repeat these steps until the remote operates your equipment.

Operating Instructions

Basic Functions

• Temperature Adjustment: Use the "TEMP+" and "TEMP-" buttons to increase or decrease the temperature.
• Mode Selection: Press the "MODE" button to cycle through operating modes (e.g., Cool, Heat, Fan, Dry, Auto).
• Fan Speed: Use the "FAN" button to adjust the fan speed.
• Swing/Vane: Use the "SWING" and "VANE" buttons to control the air deflector's movement.
• One Key Operation: For quick operation, simply aim the remote at your air conditioner and press the "One Key" button. The remote will automatically set the temperature to 26°C in summer or 20°C in winter, based on the current ambient temperature. You can then adjust the temperature manually if desired.
• Room Temperature Display: Press the "TEMP" button to display the current room temperature. It will revert to the setting temperature after 5 seconds. This function allows the remote to act as a thermometer.

Clock Setup

1. Press the "CLOCK" button. The clock display will start blinking.
2. Use the "TIME+" or "TIME-" buttons to set the current time.
3. Press the "CLOCK" button again to stop blinking and complete the time setting. If you do not press the "TIME" button, the time will be set automatically after 5 seconds.

Timer ON and OFF

You can set the timer for the air conditioner to turn on or off, regardless of its current state.

1. Timer ON: Press the "TM ON" button. The LCD will display the clock signal and time blinking. Use the "TIME/CODE" "+" or "-" buttons to adjust to the desired turn-on time. The time will be confirmed after 5 seconds.
2. Timer OFF: Press the "TM OFF" button. The LCD will display the clock signal and time blinking. Use the "TIME/CODE" "+" or "-" buttons to adjust to the desired turn-off time. The time will be confirmed after 5 seconds.

Note:

• The timer can be set for a 00-24 hour period.
• Pressing the "TM ON" or "TM OFF" button twice continuously will cancel the timing.
• For timing settings to work effectively, the remote control must be aimed at the air conditioner within effective distance.

Maintenance

Battery Replacement

If the remote control will not be used for an extended period, remove the batteries to prevent leakage, which could damage the device. Replace batteries when the LCD display becomes dim. Always use new batteries; do not mix new and old batteries. After battery replacement, it is generally not necessary to reset the model code.

General Care

Keep the remote control clean and dry. Avoid exposing it to extreme temperatures, humidity, or direct sunlight. Do not drop or subject the remote to strong impacts.

Troubleshooting

Remote Not Working or Inconsistent Operation

• Check Batteries: Ensure batteries are correctly installed and have sufficient charge. Replace them if the LCD is dim.
• Re-enter Code: If the remote stops working, try re-entering the 4-digit code for your air conditioner.
• Line of Sight: Ensure there are no obstructions between the remote controller and the air conditioner. The remote's operation is effective only when the air conditioner receives the signal.
• Timer Issues: If the timer function is not working, verify that there is no obstruction between the remote and the air conditioner.

Temperature Display in Celsius Only

As stated in the product overview, this model displays temperature in Celsius degrees only. There is no function to switch to Fahrenheit.

Specifications

Warranty and Support

The manufacturer reserves the final explanatory right regarding this product. Any alterations to the design and model may occur without further notification.

For further assistance or inquiries, please refer to the product packaging or contact the seller/manufacturer directly.