BODUM Bistro Food Grinder and Meat Mincer Attachment User Manual

Introduction

This manual provides comprehensive instructions for the safe and effective use of your BODUM Bistro Food Grinder and Meat Mincer Attachment, Model 11514-10. This attachment is designed to expand the functionality of your Bodum Bistro Stand Mixer, enabling you to perform various grinding and mincing tasks. It includes two grinding plates for different textures, suitable for processing meats, vegetables, firm fruits, and cheeses.

Important Safety Instructions

Please read all instructions carefully before using the food grinder attachment. Failure to follow these instructions may result in injury or damage to the product.

• Always ensure the stand mixer is unplugged from the power outlet before attaching, detaching, or cleaning the food grinder.
• Keep hands and utensils away from moving parts during operation to prevent injury.
• Use only the provided food pusher to guide food into the feed tube. Never use fingers or other objects.
• Ensure all parts are correctly assembled and securely fastened before operating the attachment.
• Do not operate the food grinder without food in the feed tube for extended periods, as this may cause unnecessary wear.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Always place the stand mixer on a stable, flat, and dry surface during use.

Parts Identification

Familiarize yourself with the components of your food grinder attachment:

• Grinder Housing: The main body of the attachment.
• Feed Tube: Where food is inserted for grinding.
• Pusher: Used to guide food into the feed tube.
• Auger (Worm Gear): The spiral component that moves food towards the cutting blade.
• Cutting Blade: The sharp component that cuts food against the grinding plate.
• Grinding Plates: Two interchangeable plates (coarse and fine) for different grinding textures.
• Locking Ring: Secures the grinding plate and cutting blade to the housing.

Setup and Assembly

Follow these steps to correctly assemble and attach the food grinder to your Bodum Bistro Stand Mixer:

1. Ensure your Bodum Bistro Stand Mixer is unplugged and turned off.
2. Insert the auger (worm gear) into the grinder housing.
3. Place the cutting blade onto the end of the auger shaft, ensuring the sharp edge faces outwards towards the grinding plate.
4. Select the desired grinding plate (coarse or fine) and place it over the cutting blade, aligning the notch on the plate with the pin on the housing.
5. Screw the locking ring onto the grinder housing until it is hand-tight. Do not overtighten.
6. Remove the attachment hub cover from the front of your Bodum Bistro Stand Mixer.
7. Insert the assembled food grinder attachment into the attachment hub, ensuring the square shaft aligns with the square drive socket.
8. Tighten the attachment knob on the stand mixer to secure the food grinder in place.

Operating Instructions

Once assembled, you can begin using your food grinder attachment:

1. Prepare your ingredients by cutting them into pieces that fit easily into the feed tube. Remove any bones, tough tendons, or large seeds.
2. Place a bowl or container beneath the grinding plate to collect the processed food.
3. Plug in your Bodum Bistro Stand Mixer and turn it on to a low or medium speed setting (refer to your stand mixer manual for recommended speeds for attachments).
4. Carefully feed the prepared food into the feed tube. Use the food pusher to gently guide the food down. Never force food into the grinder or use your fingers.
5. Continue feeding food until all ingredients are processed.
6. Once finished, turn off the stand mixer and unplug it from the power outlet.

Cleaning and Maintenance

Proper cleaning ensures the longevity and hygiene of your food grinder attachment:

1. Unplug the stand mixer and detach the food grinder attachment.
2. Disassemble the food grinder by unscrewing the locking ring, removing the grinding plate, cutting blade, and auger.
3. Wash all parts immediately after use to prevent food from drying and sticking. The transparent BPS-free Tritan plastic construction and metal components are dishwasher safe. For best results, rinse off large food particles before placing in the dishwasher.
4. For hand washing, use warm, soapy water and a brush to remove any residue. Rinse thoroughly.
5. Ensure all parts are completely dry before reassembling or storing to prevent rust or bacterial growth.
6. Store the attachment and its components in a clean, dry place.

Troubleshooting

If you encounter issues during operation, refer to the following common problems and solutions:

• Food is not grinding or is grinding slowly:
  • Ensure the cutting blade and grinding plate are correctly installed. The sharp edge of the blade must face the grinding plate.
  • Check if the locking ring is sufficiently tightened.
  • Food pieces may be too large; cut them into smaller, manageable sizes.
  • The grinder may be clogged. Disassemble and clean thoroughly.
• Grinder makes unusual noises:
  • Ensure the attachment is securely fastened to the stand mixer.
  • Check for any foreign objects in the grinder.
  • Verify that all internal components are correctly assembled.
• Food is backing up in the feed tube:
  • Do not overfill the feed tube.
  • Use the food pusher gently and consistently, without excessive force.
  • The grinding plate may be clogged; clean as per cleaning instructions.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the documentation provided with your Bodum Bistro Stand Mixer or visit the official Bodum website. Keep your purchase receipt as proof of purchase for any warranty claims.