Orbit 94148 Buddy II Battery-Operated Two-Outlet Watering Timer User Manual

Introduction

The Orbit 94148 Buddy II is a battery-operated watering timer designed to automate your garden irrigation system. This device connects to your outdoor faucet and allows you to program watering schedules for two independent outlets, providing flexibility for various watering needs such as micro-jets, drip systems, and garden sprinklers.

Safety Information

• For outdoor use only.
• Use with cold water only.
• Do not submerge the timer in water.
• Protect from freezing temperatures to prevent damage.

Package Contents

The Orbit 94148 Buddy II watering timer package includes:

• One Orbit 94148 Buddy II Two-Outlet Watering Timer.
• User Manual (this document).

Note: AA batteries are required for operation and are not included in the package.

Setup

Follow these steps to set up your Orbit 94148 Buddy II watering timer:

1. Install Batteries: Open the battery compartment and insert the required AA batteries (not included). Ensure correct polarity.
2. Connect to Faucet: Securely attach the timer to your outdoor faucet. Hand-tighten only to prevent damage.
3. Connect Hoses: Attach your garden hoses or irrigation lines to the two independent outlets on the timer.

Operating Instructions

The Orbit 94148 Buddy II offers both automatic programming and manual watering options.

Automatic Programming

To program the timer for automatic watering:

1. Set Current Time: Use the dial to set the current time of day.
2. Set Start Time: Choose the desired time for watering to begin.
3. Set Watering Duration: Select the length of each watering cycle, ranging from 1 to 240 minutes.
4. Set Frequency: Determine how often watering occurs. Options include every 6 hours, every 12 hours, or daily intervals from 1 to 7 days.
5. Activate Auto Mode: Turn the dial to the "Auto" position to enable the programmed watering schedule.

Each of the two outlets can be programmed independently, allowing for different watering schedules for separate areas of your garden.

Manual Watering

To manually water without affecting your programmed schedule:

• Turn the dial to the "Manual" position.
• Select the desired watering duration.
• The water will flow for the selected duration and then automatically shut off.
• To stop manual watering early, turn the dial back to the "Off" or "Auto" position.

Maintenance

Regular maintenance ensures optimal performance and longevity of your watering timer.

• Battery Replacement: When the battery indicator shows low power, replace the AA batteries promptly. Always use fresh batteries.
• Cleaning: Periodically check the filter washer at the faucet connection for debris and clean if necessary to maintain proper water flow.
• Winterization: Before the first frost, disconnect the timer from the faucet, remove batteries, and store the unit indoors in a dry, protected area to prevent freeze damage.

Troubleshooting

If you encounter issues with your watering timer, consider the following:

• No Water Flow:
  • Check if the faucet is fully open.
  • Ensure batteries are correctly installed and have sufficient power.
  • Verify that the timer is set to "Auto" or a manual watering cycle is active.
  • Inspect the filter washer for clogs.
• Timer Not Programming:
  • Confirm batteries are fresh and properly inserted.
  • Ensure the dial is firmly clicked into each setting position during programming.
• Leaking:
  • Check all connections for tightness.
  • Ensure rubber washers are properly seated at all connection points.
  • Do not overtighten connections, as this can damage washers.

Specifications

Warranty and Support

The Orbit 94148 Buddy II Battery-Operated Two-Outlet Watering Timer comes with a 2-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For warranty claims or technical support, please refer to the contact information provided on the product packaging or the official Orbit website.