1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Modern Fan Company Altus 52-inch Gloss White Ceiling Fan with Wall Control. Please read all instructions carefully before beginning installation and retain this manual for future reference. Proper installation and adherence to safety guidelines are crucial for safe and efficient operation.
Image 1.1: The Modern Fan Company Altus 52-inch Gloss White Ceiling Fan, featuring three white blades and a central motor housing, designed for ceiling installation.
2. Safety Information
Always follow basic safety precautions when installing and operating this ceiling fan to reduce the risk of fire, electric shock, and personal injury.
- Electrical Safety: Ensure the power supply is disconnected at the circuit breaker or fuse box before installation or servicing. All electrical wiring must be performed by a qualified electrician and conform to local and national electrical codes. The fan operates on 120 Volts.
- Mounting: The mounting structure must be capable of supporting the weight of the fan (approximately 17.81 pounds) plus the dynamic load of the fan in motion.
- Blade Clearance: Maintain a minimum clearance of 7 feet from the floor to the bottom edge of the fan blades. Ensure blades are clear of any obstructions.
- Fan Operation: Do not insert objects into the path of the fan blades while the fan is operating.
- Wall Control: Install the wall control in a standard wall switch box.
3. Package Contents
Verify that all components are present before beginning installation. If any parts are missing or damaged, contact Modern Fan Company customer support.
- Fan Motor Assembly
- Fan Blades (3 x 52" White Blades)
- Downrod (shortest downrod provides 11.7" height)
- Mounting Bracket
- Wall Control Unit
- Hardware Pack (screws, washers, wire nuts, etc.)
- Instruction Manual
4. Setup and Installation
Installation should be performed by a qualified electrician or a competent individual with experience in electrical wiring and ceiling fan installation.
4.1 Pre-Installation
- Power Disconnection: Turn off power at the main circuit breaker or fuse box to avoid electrical shock.
- Mounting Location: Select a location where the fan blades will have at least 7 feet of clearance from the floor and 30 inches from any wall or obstruction. The ceiling joist or support structure must be able to support the fan's weight.
4.2 Mounting Bracket Installation
Secure the mounting bracket to the ceiling outlet box. The outlet box must be listed for fan support and capable of supporting 35 lbs (15.9 kg) or more. Use the screws and washers provided with the outlet box or mounting bracket.
4.3 Downrod Assembly
Insert the downrod through the canopy and coupling. Feed the electrical wires from the fan motor through the downrod. Secure the downrod to the fan motor assembly using the provided pin and screw.
4.4 Wiring
Carefully lift the fan assembly and hang it on the mounting bracket. Connect the electrical wires according to the wiring diagram provided in the separate wiring instructions sheet. Ensure all connections are secure using wire nuts. This fan requires a 120-volt power supply.
4.5 Fan Body and Blade Attachment
Once wiring is complete and secured, attach the fan body to the mounting bracket. Then, securely fasten the three 52-inch gloss white blades to the fan motor housing using the provided screws.
4.6 Wall Control Installation
Install the wall control unit into a standard wall switch box. Connect the wires from the wall control to the household wiring as indicated in the wall control's specific wiring diagram. Ensure power is off before performing this step.
5. Operating Instructions
Your Altus ceiling fan is operated using the included 4-speed wall control.
- Power On/Off: Use the designated button on the wall control to turn the fan on or off.
- Speed Control: The wall control allows you to select from four distinct fan speeds. Adjust the speed to achieve your desired airflow. The fan provides a maximum airflow of 6,422 CFM on high speed.
- Airflow Direction: This model typically operates in a single direction for cooling. Refer to the specific wall control instructions for any potential seasonal reversal features, though not standard for all models.
6. Maintenance
Regular maintenance ensures optimal performance and extends the life of your ceiling fan.
- Cleaning: To clean the fan, wipe the gloss white finish and blades with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish. Ensure power is off before cleaning.
- Blade Care: Periodically check the fan blades for dust accumulation. Clean them gently to maintain balance and airflow efficiency.
- Tighten Fasteners: Annually, check all screws and fasteners on the fan and mounting hardware to ensure they are secure. Loose connections can cause noise or wobbling.
7. Troubleshooting
If you experience issues with your fan, consult the following common troubleshooting steps.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start | No power to the fan Loose wire connections Incorrect wall control wiring | Check circuit breaker/fuse Verify all wire connections are secure (power off) Review wall control wiring diagram |
| Fan wobbles | Loose blade screws Unbalanced blades Loose mounting bracket | Tighten all blade screws Ensure blades are clean and free of debris; consider a blade balancing kit Verify mounting bracket is securely fastened |
| Noisy operation | Loose screws Motor housing rubbing Improper installation | Check and tighten all screws Ensure no parts are touching the ceiling or other components Review installation steps for proper assembly |
| Wall control not working | Incorrect wiring Faulty control unit | Check wall control wiring (power off) Contact customer support for replacement if faulty |
8. Specifications
Key technical specifications for the Modern Fan Company Altus 52" Ceiling Fan.
- Brand: Modern Fan Company
- Model: ALT-GW-52-WH-NL-001
- Color: Gloss White
- Fan Design: Ceiling Fan
- Product Dimensions: 52"D x 52"W x 11.7"H (with shortest downrod)
- Blades: 3 x 52" White Blades
- Control Method: 4 Speed Wall Control
- Max Airflow: 6,422 Cubic Feet Per Minute (CFM)
- Blade Pitch: 12 Degree
- Voltage: 120 Volts
- Wattage: 71.00 Watts
- Noise Level: 65 Decibels
- Item Weight: 17.81 pounds
- UPC: 711746296625
9. Warranty and Support
For warranty information or technical support, please contact Modern Fan Company customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims. Specific warranty terms and conditions may vary and are typically provided with the product packaging or available on the manufacturer's official website.
For further assistance, please visit the Modern Fan Company website or contact their authorized support channels.