Product Overview
The Speakman SA-1007 Neo Bathroom Towel Bar is designed for modern bathrooms, featuring solid-metal construction for durability. This towel bar is easy to install and comes with all necessary mounting hardware. It is available in a Polished Chrome finish.
Image: Speakman SA-1007 Neo Towel Bar in Polished Chrome, showcasing its design with two white towels against a dark background.
Safety Tips
- Read all instructions thoroughly before beginning installation.
- Do not overtighten any connections or damage may occur.
- This item is NOT designed for use as a grab bar. Do not install in locations where product is likely to be used as a grab bar.
Required Tools and Components
Required Tools:
- Phillips Screwdriver
- Small Flat Tip Screwdriver
- Drill with 1/4" bit
- Pencil
- Tape Measure
- Level
Components Included:
- Towel Bar
- Mounting Brackets
- Plastic Anchors
- Mounting Screws
- Holding Screws
Image: Exploded view of the towel bar components, illustrating how each part fits together for installation.
Installation Instructions
Follow these steps for proper installation of your Speakman SA-1007 Neo Bathroom Towel Bar. Ensure you have all required tools and components before starting.
- Mark Drilling Locations: Drill 1/4" holes in marked locations. If mounting to a stud, do not use wall anchors. Secure Mounting Brackets to wall using Mounting Screws without drilling holes.
Illustration of drilling pilot holes for the mounting hardware.
- Prepare Mounting Posts: Loosen set screw at base of each post and remove brackets (if necessary). Determine mounting location of component and lightly trace outline on wall with a pencil.
Illustration of preparing the mounting posts and marking the wall.
- Install Plastic Anchors: Insert Plastic Anchors into drilled holes and press in until flush with wall. Secure Mounting Brackets to wall with Mounting Screws using a Phillips Screwdriver.
Illustration of inserting plastic anchors and securing mounting brackets.
- Attach Towel Bar: Center Mounting Bracket within traced outline. Mark the 2 mounting locations with a pencil. Locate post over Mounting Bracket and tighten Set Screw with Small Flat Tip Screwdriver. Repeat steps 1 thru 5 for remaining items.
Illustration of attaching the towel bar to the installed mounting brackets.
Operation
The Speakman SA-1007 Neo Bathroom Towel Bar is designed for holding towels and other lightweight bathroom textiles. Simply drape your towels over the bar for convenient storage and drying.
Image: Speakman SA-1007 Neo Towel Bar in Polished Chrome, shown with a towel in a bathroom setting.
Maintenance
To maintain the finish and appearance of your towel bar, follow these cleaning guidelines:
- Clean with a soft, damp cloth only.
- Do not use scrub pads, abrasive detergents, or chemical cleansers as they may harm the protective finish of your bath accessories.
Troubleshooting
If you encounter any issues with your Speakman SA-1007 Neo Bathroom Towel Bar that are not covered by these instructions, please contact Speakman customer service for assistance.
Specifications
| Feature | Detail |
|---|---|
| Model Number | SA-1007 |
| Brand | Speakman |
| Color | Polished Chrome |
| Material | Zinc |
| Finish Type | Polished |
| Installation Type | Wall mounted |
| Item Weight | 0.69 Pounds (approximately 11 ounces) |
| Product Dimensions | 2.98 x 26.2 x 2.17 inches |
| UPC | 671252097713, 735090089689 |
Image: Detailed technical drawing showing the dimensions of the towel bar.
Warranty and Support
Warranty Information:
This Speakman SA-1007 Neo Bathroom Towel Bar comes with a 1 Year Limited Warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
Customer Support:
For additional assistance, service calls, or warranty inquiries, please contact Speakman Company:
- Address: 400 Anchor Mill Road, New Castle, DE 19720
- Phone: 800-537-2107
- Email: customerservice@speakmancompany.com
- Website: www.speakmancompany.com
