STANLEY 2-Outlet Indoor Mechanical Timer (Model 31198)

Introduction

This manual provides detailed instructions for the safe and efficient operation of your STANLEY 2-Outlet Indoor Polarized Mechanical Timer, Model 31198. This device is designed to automatically control the ON/OFF cycles of two connected electrical appliances or lamps over a 24-hour period. Please read this manual thoroughly before initial use and retain it for future reference.

Important Safety Information

• Indoor Use Only: This timer is designed for indoor use in dry locations. Do not expose to moisture or extreme temperatures.
• Electrical Rating: Do not exceed the electrical rating of the timer. Overloading can cause overheating and fire.
• Polarized Outlets: This timer features polarized outlets. Ensure that appliances connected are also polarized. Do not attempt to force a non-polarized plug into a polarized outlet.
• Unplug When Not in Use: Always unplug the timer from the wall outlet before cleaning or when not in use for extended periods.
• Children and Pets: Keep out of reach of children and pets.
• Do Not Disassemble: Do not attempt to open or repair the timer. Refer all servicing to qualified personnel.
• Proper Insertion: Ensure the timer is fully inserted into the wall outlet.

Product Overview

The STANLEY 2-Outlet Indoor Mechanical Timer features a rotating dial with 24-hour markings and multiple pins for setting ON/OFF times. It includes two polarized outlets for connecting appliances.

Figure 1: Front view of the Stanley 2-Outlet Indoor Mechanical Timer. The central dial displays time markings (AM/PM) and has small, push-down pins around its circumference. Two polarized outlets are visible on the left side of the unit.

Key Components:

• 24-Hour Dial: The large rotating dial marked with hours (1-12 AM and 1-12 PM).
• Timing Pins: Small, push-down segments around the dial. Each segment represents a 15-minute interval. Pushing a pin DOWN turns the connected device ON during that interval. Pushing a pin UP turns the connected device OFF.
• Current Time Arrow: A stationary arrow or marker on the timer's body that indicates the current time on the rotating dial.
• Polarized Outlets: Two outlets located on the side of the timer for connecting appliances.
• Manual ON Override Switch: A switch (if present, based on product description "Manual ON override switch") to manually turn the connected devices ON or OFF, overriding the timer settings. (Note: The provided image does not clearly show this switch, but the product description mentions it.)

Setup Instructions

1. Set Current Time: Rotate the 24-hour dial clockwise until the current time aligns with the stationary arrow on the timer's body. Ensure to distinguish between AM and PM hours.
2. Program ON/OFF Times:
   • Locate the small pins around the outer edge of the dial. Each pin represents a 15-minute interval.
   • Push the pins DOWN for the periods you want the connected appliance to be ON.
   • Leave the pins UP for the periods you want the connected appliance to be OFF.
3. Connect Appliance: Plug your appliance(s) into the polarized outlets on the side of the timer.
4. Plug Timer into Wall: Insert the timer into a standard indoor wall outlet.

The timer will now begin its programmed cycle, repeating daily.

Operating Instructions

Manual Override:

If your timer includes a manual ON override switch, you can use it to temporarily turn the connected devices ON or OFF, regardless of the programmed settings. Once the switch is returned to the "Timer" position, the unit will resume its programmed schedule.

Adjusting Programmed Times:

To change the ON/OFF schedule, simply pull up or push down the desired pins on the 24-hour dial. No need to unplug the timer from the wall, but ensure the appliance is off or unplugged if you are making significant adjustments to avoid accidental activation.

Maintenance

• Cleaning: Unplug the timer from the wall outlet before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Storage: When not in use, store the timer in a cool, dry place, away from direct sunlight and moisture.

Troubleshooting

Specifications

• Model: 31198
• Brand: STANLEY
• Type: Indoor Mechanical Timer
• Outlets: 2 Polarized Outlets
• Program Intervals: 15-minute increments
• Daily Program: Repeats daily
• Material: Plastic
• Color: White
• Dimensions: Approximately 5 x 3 x 2 inches
• Weight: Approximately 5 ounces (0.31 lbs)
• UPC: 686140311987
• Safety Certification: ETL Safety Certified (as per product title)

Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or contact STANLEY customer service. Keep your proof of purchase for warranty claims.

For additional product information, you may visit the official STANLEY website or contact their customer support channels.