McGard 64022 Black Cone Seat Style Lug Nut User Manual

Introduction

This manual provides essential information for the proper installation and maintenance of your McGard 64022 Black (M14 x 1.5 Thread Size) Cone Seat Style Lug Nuts. These lug nuts are engineered to meet or exceed OEM standards for safety and durability, featuring a superior finish that protects against rust, chipping, and peeling. For optimal performance and longevity, please follow these instructions carefully.

Image: A set of four McGard 64022 Black Cone Seat Style Lug Nuts.

Setup and Installation

Proper installation is crucial for the safety and performance of your vehicle. Follow these steps for installing your new lug nuts:

1. Preparation: Before installing, remove one of the existing lug nuts from your wheel. If the wheel stud appears rusty, clean it thoroughly with a wire brush. Do not lubricate the threads.
2. Initial Threading: Begin by threading the new lug nut onto the wheel stud by hand. Ensure it threads smoothly without resistance.
3. Tool Selection: Use a lug wrench or socket that is deep enough to prevent contact with the top of the lug nut. This ensures proper engagement and prevents damage.
4. Torque Application: For best results and final tightening, use a torque wrench and socket. Tighten each lug nut to the recommended installation torque specified in your vehicle's owner's manual. If installing an aftermarket wheel, use the torque setting recommended by the wheel manufacturer.
5. Tightening Pattern: Repeat the tightening steps in a progressive criss-cross pattern for each lug nut on the wheel, and for each wheel on your vehicle. This ensures even pressure and proper seating of the wheel.
6. Important Note: It is not recommended to use an impact gun. Use of an impact gun can result in uneven or overtightening of lug nuts, which could damage wheels or distort brake rotors.

Image: A single McGard 64022 Black Cone Seat Style Lug Nut, highlighting its design.

Operating Instructions

Once properly installed and torqued, McGard lug nuts operate as standard wheel fasteners. No special operating procedures are required beyond regular vehicle use.

Maintenance

• Re-torquing: Lug nuts are critical fasteners. They should be re-torqued after the first 25 miles of driving following installation. This ensures they remain securely fastened after initial settling.
• Cleaning: To maintain the superior finish and prevent rust, regularly clean your lug nuts with appropriate wheel cleaners. Avoid harsh, corrosive chemicals that may damage the finish.
• Inspection: Periodically inspect lug nuts for any signs of damage, rust, or wear. Replace any damaged lug nuts immediately.

Troubleshooting

No specific troubleshooting steps are typically required for lug nuts beyond ensuring proper installation and torque. If you experience any issues such as loose wheels, unusual noises, or difficulty removing/installing lug nuts, consult a qualified automotive technician immediately.

Specifications

Warranty Information

McGard Chrome Plated Tough Nuts are guaranteed for life not to rust, chip, or peel. This warranty reflects the premium quality and durability of the product.

Support

For any questions regarding your McGard lug nuts or for technical assistance, please contact McGard Technical Support at 1-800-444-5847.