SO-TECH® Dispensa-x Complete Pull-Out Cabinet Set

Introduction

Thank you for choosing the SO-TECH® Dispensa-x Complete Pull-Out Cabinet Set. This Kesseböhmer original system is designed to provide optimal storage and easy access within tall cabinets, maximizing space utilization from top to bottom and side to side. With its full extension mechanism and SoftStoppPlus feature, it ensures smooth, quiet operation and can hold up to 100 kg. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure a seamless experience with your new cabinet system.

Safety Information

• Always read and understand all instructions before beginning installation.
• Ensure all components are present and undamaged before assembly.
• Use appropriate personal protective equipment (PPE) such as gloves and safety glasses during installation.
• Securely fasten all mounting hardware to prevent the cabinet system from tipping or detaching.
• Do not exceed the maximum load capacity of 100 kg.
• Keep small parts away from children to prevent choking hazards.
• If you are unsure about any step, consult a qualified professional.

Package Contents

Please verify that all the following components are included in your package:

• 1 x Height-adjustable frame for cabinet body height of 1900-2300 mm (Part No. 05 4383)
• 1 x DISPENSA-VVSx full extension fitting with 100 Kg load capacity (Part No. 06 4235) with SoftStoppPlus for soft and silent closing
• 2 x Dispensa-x front supports for wide 400 mm facade (Part No. 05 4367)
• 5 x Storage baskets, silver, dimensions 350 x 467 x 110 mm (Part No. 00 1997), suitable for cabinet body width of 400 mm

Height-adjustable frame (Part No. 05 4383)

Full extension fitting (Part No. 06 4235)

Front supports (Part No. 05 4367)

Storage basket (Part No. 00 1997)

Setup and Installation

This section outlines the general steps for installing your SO-TECH Dispensa-x pull-out cabinet system. Professional installation is recommended for optimal results.

1. Prepare the Cabinet: Ensure your tall cabinet has an internal width of 400 mm and a height between 1900-2300 mm. Clear the cabinet interior of any obstructions.
2. Install the Full Extension Fitting: Mount the DISPENSA-VVSx full extension fitting (06 4235) to the bottom of the cabinet according to the detailed instructions provided with the hardware. Ensure it is level and securely fastened.
   

   The full extension fitting provides smooth movement and supports up to 100 kg.
3. Assemble the Frame: Assemble the height-adjustable frame (05 4383) and adjust its height to fit precisely within your cabinet's internal height (1900-2300 mm).
   

   The adjustable frame adapts to various cabinet heights.

4. Integrate Frame with Fitting: Carefully connect the assembled frame to the full extension fitting. Follow the manufacturer's specific instructions for this connection to ensure proper alignment and function.
5. Attach Front Supports: Secure the two Dispensa-x front supports (05 4367) to the frame. These supports will be used to attach your cabinet's facade.
   

   Front supports for attaching the cabinet door.

6. Install Baskets: Hook the five storage baskets (00 1997) onto the frame at your desired heights. The baskets are designed for easy adjustment.
   

   The five storage baskets provide ample and adjustable storage space.
7. Attach Cabinet Facade: Mount your cabinet's facade (door) to the front supports. Ensure it is level and aligned with the rest of your cabinetry.
   

   The complete system installed in a kitchen cabinet, showcasing its full extension.

Operating Instructions

The SO-TECH Dispensa-x system is designed for intuitive and smooth operation.

• Opening: Gently pull the cabinet facade outwards. The full extension runners will smoothly glide the entire system out of the cabinet, providing complete access to all stored items.
  

  Items are easily accessible from both sides of the pull-out system.

• Closing: Push the cabinet facade back towards the cabinet. The SoftStoppPlus mechanism will engage, ensuring a soft and silent closing, preventing slamming.
• Loading: Distribute items evenly across the baskets. Do not exceed the maximum load capacity of 100 kg. The adjustable baskets allow for flexible storage of various item sizes.

Maintenance

Regular maintenance will ensure the longevity and smooth operation of your Dispensa-x system.

• Cleaning: Wipe down the metal components and baskets with a soft, damp cloth. For stubborn dirt, use a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive materials that could damage the finish.
• Lubrication: The full extension runners are designed to be maintenance-free. Avoid applying lubricants unless specifically instructed by the manufacturer, as this could attract dust and hinder performance.
• Inspection: Periodically check all screws and fasteners to ensure they are tight. If any components appear loose or damaged, tighten or replace them as necessary.

Troubleshooting

Problem	Possible Cause	Solution
System does not pull out smoothly or gets stuck.	Overloaded, debris in runners, misaligned.	Reduce load. Check runners for obstructions and clean. Verify alignment of the frame and runners.
Facade is not aligned with cabinet.	Front supports are not adjusted correctly.	Adjust the screws on the front supports using a standard PZ2 screwdriver to align the facade. Adjusting the facade for perfect alignment.
Soft-close function not working.	Mechanism obstructed or damaged.	Check for any obstructions around the SoftStoppPlus mechanism. If damaged, contact customer support.

Specifications

• Model: SO39048
• Brand: SO-TECH / Kesseböhmer
• Cabinet Height Compatibility: 1900 - 2300 mm
• Cabinet Width Compatibility: 400 mm
• Material: Metal
• Finish: Matt
• Load Capacity: Up to 100 kg
• Extension Type: Full Extension with SoftStoppPlus
• Basket Dimensions (each): 350 x 467 x 110 mm (Depth x Width x Height)
• Mounting Type: Door Mount

Warranty and Support

For specific warranty information regarding your SO-TECH Dispensa-x Complete Pull-Out Cabinet Set, please refer to the documentation provided at the time of purchase or contact your retailer. Warranty terms typically cover manufacturing defects and material flaws.

For technical support, spare parts, or any inquiries not covered in this manual, please contact SO-TECH customer service or the authorized dealer from whom you purchased the product. Have your model number (SO39048) and purchase details ready when contacting support.

You can find more information about SO-TECH products and contact details on their official website: www.sotech.de