LAYEN BS-1

LAYEN BS-1 Bluetooth 5.3 30-Pin Adapter Instruction Manual

Model: BS-1 | Brand: LAYEN

1. Introduction

The LAYEN BS-1 is a Bluetooth 5.3 wireless adapter designed to upgrade your existing 30-pin docking station, Hi-Fi system, or speakers with modern Bluetooth connectivity. This allows you to stream audio wirelessly from any Bluetooth-enabled device such as a smartphone, tablet, or laptop. This manual provides essential information for the proper setup, operation, and maintenance of your BS-1 adapter.

2. Safety Information

  • Ensure the adapter is used in a dry environment. Do not expose it to water, moisture, or extreme temperatures.
  • This device is not intended for use in cars.
  • Do not attempt to disassemble or modify the adapter. This may void your warranty and cause damage.
  • Keep out of reach of children.

3. Product Overview

The LAYEN BS-1 is a compact, dark grey Bluetooth music receiver. It features a 30-pin connector for direct integration with compatible docking stations and is powered directly by the dock, eliminating the need for an internal battery or separate charging. The adapter utilizes Bluetooth 5.3 for stable and efficient wireless audio streaming.

LAYEN BS-1 Bluetooth adapter inserted into a Bose SoundDock

Image: The LAYEN BS-1 adapter seamlessly integrated into a Bose SoundDock.

4. Setup Instructions

Follow these steps to connect your LAYEN BS-1 adapter to your 30-pin docking station and pair it with your Bluetooth device:

  1. Insert the Adapter: Carefully insert the LAYEN BS-1 adapter into the 30-pin connector on your docking station. Ensure it is fully seated.
  2. Power On the Dock: Turn on your 30-pin docking station. The adapter will power on automatically, indicated by a flashing blue light. This light signifies that the adapter is in pairing mode.
  3. Activate Bluetooth on Your Device: On your smartphone, tablet, or other Bluetooth-enabled device, go to the Bluetooth settings menu and ensure Bluetooth is turned on.
  4. Search for Devices: Your device will begin searching for available Bluetooth devices. Look for "LAYEN BS-1" in the list.
  5. Pair the Devices: Select "LAYEN BS-1" from the list to initiate pairing. If prompted for a password, enter "0000" (though typically not required). The blue light on the adapter will become solid once successfully paired.
  6. Manual Pairing (if needed): If the adapter does not automatically enter pairing mode or you wish to re-pair, locate the small button on the side of the BS-1 marked with a Bluetooth symbol. Press and hold this button until the blue light flashes, indicating pairing mode.
Diagram showing connect, pair, play steps for LAYEN BS-1

Image: Visual guide for the simple 3-step setup: Connect the adapter, Pair with your device, and Play music.

5. Operating Instructions

Once the LAYEN BS-1 is successfully paired with your device, you can begin streaming audio wirelessly.

  • Audio Playback: Play any audio from your connected device (e.g., music, podcasts, videos). The sound will be transmitted to your 30-pin docking station.
  • Control: Control playback (play, pause, skip tracks, volume) directly from your paired device. In some cases, the original dock remote control may also function.
  • Auto-Repair: The BS-1 remembers up to 8 paired devices and will automatically connect to the last paired device when in range and powered on.
  • Voice Control: For voice-activated control, pair the BS-1 through the Alexa app with compatible Amazon Echo devices.
  • Wireless Range: The adapter offers a wireless range of 10 meters (33 feet) or more. With a clear line of sight, a range of over 30 meters (100 feet) has been observed. Performance may vary based on environmental factors and obstacles.
Smartphone displaying music apps with LAYEN BS-1 adapter

Image: Stream music wirelessly from various applications on your smartphone to your docking station.

6. Compatibility

The LAYEN BS-1 is designed for a wide range of 30-pin docking stations, but it is not universally compatible. Please review the lists below to determine if your device is supported. If your dock has an AUX input, an AUX/3.5mm Bluetooth adapter may be an alternative if the BS-1 is not compatible.

LAYEN BS-1 compatibility list for 30-pin docks

Image: Detailed compatibility list for the LAYEN BS-1 Bluetooth adapter.

Compatible Docks (Partial List):

  • Bose SoundDock I, SoundDock II, SoundDock 10, SoundDock Portable, Bose Wave, Bose V35 systems
  • Altec Lansing IMT800, IMT810 Boombox, In Motion iM600, IMT 320
  • Apple A1121 Dock, iPod Hi-fi
  • Cambridge Audio iD10, iD50
  • Denon ASD-1R Control Dock
  • Harman Kardon Go Play + II, BDS800
  • JBL On Beat, On Time, Onstage series
  • Logitech S715i
  • Philips DC315/05, DS3000/37 Fidelio
  • Roberts DAB 53, MP 43, Sound 200, Sound 53
  • Sony ICF-C05iP, ICF-7iP, RDP-X50iP, SRS GU10iP
  • Yamaha TSX-120, YSP 2200

Incompatible Docks (Partial List):

  • All 30-Pin DAB/Digital docks.
  • All Car stereos.
  • Bose III, Bose Wave I with Connect Kit.
  • Most Bowers & Wilkins (B&W) models.
  • Most Bang & Olufsen (B&O) models.
  • Denon M39 DAB, RCD N7.
  • Logitech Pure-fi Anywhere 2, UE Air.
  • Pioneer CM31-DAB, XW-NAW1-K.
  • Philips DS9010, DCM3260.
  • Sony CMT-BX77DBi, HCD BX70DBi, NAS Z200IR.

7. Troubleshooting

If you encounter issues with your LAYEN BS-1 adapter, please refer to the following common solutions:

ProblemSolution
No sound or intermittent audio.
  • Ensure the adapter is fully inserted into the dock.
  • Verify the dock is powered on and functioning correctly.
  • Check that your Bluetooth device is paired and connected to "LAYEN BS-1".
  • Increase the volume on both your Bluetooth device and the docking station.
  • Reduce the distance between your device and the adapter, and remove any obstructions.
Cannot pair with the adapter.
  • Ensure the adapter's blue light is flashing, indicating pairing mode. If not, press and hold the Bluetooth button on the side of the adapter.
  • Turn off and then on your device's Bluetooth.
  • Forget "LAYEN BS-1" from your device's Bluetooth list and attempt to pair again.
  • Power cycle the docking station and the adapter by unplugging and replugging them.
Static or buzzing sound.
  • Move your Bluetooth device closer to the adapter.
  • Ensure there are no other wireless devices causing interference nearby.
  • Try unplugging and replugging the adapter and dock.
Adapter stops working after a short period.
  • Unplug the adapter from the dock, wait a few seconds, and then plug it back in.
  • Ensure the docking station is providing consistent power.

8. Specifications

FeatureDetail
BrandLAYEN
Model NameBS-1
Connectivity Technology30-pin
Bluetooth Version5.3
Item Weight12 Grams
ColorDark Grey
Audio Output TypeBluetooth
Audio Output ModeStereo
Data Link ProtocolBluetooth
Rechargeable Battery IncludedNo (Powered by dock)
Compatible DevicesiPad, iPhone, iOS, Android, MP3 players, PC
Hardware InterfaceBluetooth
Connector Type30 PIN
Control MethodTouch (on device)
Controller TypeiOS, Android, Alexa, Google Home
Wireless Range10m+ (up to 30m+ with clear line of sight)

9. Official Product Video

Video: Official product video demonstrating the LAYEN BS-1 Bluetooth adapter's features and simple setup. This video provides a visual guide to connecting and using your adapter.

10. Warranty and Support

The LAYEN BS-1 adapter comes with a standard manufacturer's warranty. For specific details regarding warranty coverage, please refer to the packaging or the official LAYEN website. For technical support, troubleshooting assistance beyond this manual, or any compatibility questions, please contact LAYEN directly through their official support channels.

LAYEN and its products are not affiliated with nor endorsed by Bose Corporation (or any other brands listed).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.