1. Introduction
Thank you for choosing the Anker 2.4G Wireless Vertical Ergonomic Optical Mouse. This manual provides detailed instructions for setting up, operating, and maintaining your new mouse. Designed with your comfort in mind, its unique vertical orientation promotes a natural hand position, reducing wrist strain during extended use.
Figure 1: Anker 2.4G Wireless Vertical Ergonomic Optical Mouse with its USB receiver.
Figure 2: Ergonomic comparison highlighting the benefits of the vertical design.
2. Setup
2.1 Battery Installation
- Locate the battery compartment on the underside of the mouse.
- Open the battery compartment cover.
- Insert two (2) AAA batteries, ensuring correct polarity (+/-). (Batteries are not included)
- Close the battery compartment cover securely.
2.2 USB Receiver Connection
- The 2.4G USB receiver is stored in a slot on the bottom of the mouse. Gently pull it out.
- Plug the USB receiver into an available USB-A port on your computer.
- Turn on the mouse using the power switch located on the bottom.
- Your computer should automatically detect and install the necessary drivers.
Figure 3: Button layout and base features, showing battery compartment and USB receiver slot.
Figure 4: USB-A compatibility diagram.
3. Operating Instructions
3.1 Button Functions
- Left Click Button: Standard primary click function.
- Right Click Button: Standard secondary click function.
- Scroll Wheel: Scroll up or down through documents and web pages. Can also be pressed for middle-click functionality.
- DPI Control Button: Located on the side of the mouse. Press to cycle through DPI settings.
- Next/Previous Buttons: Located above the DPI button. Use for convenient navigation in web browsers and file explorers.
3.2 Adjusting DPI Sensitivity
The mouse features three adjustable DPI (Dots Per Inch) levels: 800, 1200, and 1600. DPI determines the sensitivity of the mouse cursor. A higher DPI means the cursor moves faster across the screen with less physical mouse movement.
- Press the DPI Control Button once to switch to the next DPI setting.
- The mouse will indicate the change (e.g., by a brief LED flash).
- Select the DPI setting that best suits your preference and task.
Figure 5: Visual representation of DPI adjustment.
3.3 Power Saving Mode
To conserve battery life, the mouse will automatically enter a power-saving mode after 8 minutes of inactivity. In this mode, power is completely cut off. To wake the mouse, simply press the left or right button.
3.4 Palm Size Fit Guide
For optimal ergonomic benefit, ensure the mouse fits your hand comfortably. Refer to the guide below for reference.
Figure 6: Palm size fit guide.
4. Maintenance
4.1 Cleaning
- Wipe the mouse surface with a soft, damp cloth.
- Do not use harsh chemicals or abrasive cleaners.
- Keep the optical sensor on the bottom clean and free of dust for optimal tracking performance.
4.2 Battery Replacement
When the mouse performance degrades or it stops responding, it is likely time to replace the batteries. Follow the battery installation steps in Section 2.1.
5. Troubleshooting
5.1 Mouse Not Responding
- Ensure the mouse is turned on using the power switch on the bottom.
- Check if the batteries are correctly inserted and have sufficient charge. Replace if necessary.
- Ensure the USB receiver is securely plugged into a working USB-A port on your computer. Try a different USB port.
- Move the mouse closer to the USB receiver to rule out range issues.
- Restart your computer.
5.2 Cursor Movement is Erratic or Jumpy
- Clean the optical sensor on the bottom of the mouse.
- Ensure you are using the mouse on a suitable surface. Avoid highly reflective or transparent surfaces. A mouse pad is recommended.
- Check for interference from other wireless devices.
5.3 DPI Adjustment Not Working
- Ensure the mouse has power.
- Press the DPI button firmly. If the issue persists, try replacing the batteries.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | Anker |
| Model Number | AK-98ANWVM-UBA |
| Connectivity Technology | 2.4G Wireless (USB Receiver) |
| Movement Detection Technology | Optical |
| DPI Resolution | 800 / 1200 / 1600 DPI |
| Number of Buttons | 5 (Left, Right, Scroll Wheel, Next, Previous, DPI) |
| Power Source | Battery Powered (2 AAA batteries required) |
| Product Dimensions (LxWxH) | 3.98 x 3.23 x 3.15 inches (120 x 62.8 x 74.8 mm) |
| Item Weight | 3.4 ounces (96.4 g) |
| Color | Black |
| Compatible Operating Systems | Linux, Windows 10, Mac |
7. Warranty and Support
7.1 Warranty Information
This Anker product comes with an 18-month hassle-free warranty from the date of purchase. This warranty covers manufacturing defects and ensures your satisfaction with the product.
7.2 Customer Support
For any questions, issues, or warranty claims, please contact Anker customer support through their official website or the contact information provided with your purchase. Please have your model number (AK-98ANWVM-UBA) and proof of purchase ready when contacting support.
