Blomus 65353
Blomus 65353 Wall Mounted Door Stop User Manual
Model: 65353
Introduction
This user manual provides comprehensive instructions for the installation, operation, and maintenance of your Blomus 65353 Wall Mounted Door Stop. Designed for durability and aesthetic appeal, this door stop effectively prevents doors from impacting walls, protecting both your doors and interior surfaces. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
Image: The Blomus 65353 Wall Mounted Door Stop, featuring its sleek stainless steel body and black synthetic bumper.
Product Features
- Elegant Design: Combines great product design with practical function, featuring a modern, compact, and stylish appearance.
- Protective Function: Effectively keeps doors from touching and damaging walls.
- Durable Materials: Constructed from high-quality stainless steel and a synthetic bumper for long-lasting performance.
- Compact Dimensions: Measures approximately 0.98"L x 0.98"W x 1.57"Th (2.5 x 2.5 x 4 cm).
- Color: Silver/Black finish.
- Design: Designed by flöz.
Package Contents
Please ensure all components are present before beginning installation.
- 1 x Blomus 65353 Wall Mounted Door Stop
- 1 x Mounting Screw (typically included, verify upon opening)
- 1 x Wall Anchor (if applicable, for drywall installation)
Setup and Installation
The Blomus 65353 door stop is designed for wall mounting. Proper installation ensures optimal performance and protection.
Tools Required:
- Pencil
- Drill
- Drill bit (appropriate size for screw/anchor)
- Screwdriver (Phillips head recommended)
- Measuring tape
Installation Steps:
- Determine Placement: Open the door to its maximum desired opening angle. Mark the wall at the point where the door handle or the edge of the door would typically make contact with the wall. Ensure the door stop will prevent contact effectively.
- Mark Drilling Point: Hold the door stop against the marked point on the wall and use a pencil to mark the exact location for drilling the mounting hole.
- Drill Pilot Hole: Using the appropriate drill bit, drill a pilot hole at the marked location. For drywall, insert a wall anchor if necessary. For wood studs, a pilot hole is still recommended to prevent splitting.
- Mount the Door Stop: Align the door stop with the drilled hole. Insert the mounting screw through the door stop and into the wall. Tighten the screw firmly with a screwdriver until the door stop is securely fastened to the wall. Do not overtighten.
- Test Functionality: Gently open the door to ensure it makes contact with the door stop's synthetic bumper and is prevented from hitting the wall.
Image: The Blomus door stop installed on a wall, positioned to prevent a door handle from impacting the surface.
Image: A close-up view of the Blomus door stop securely mounted on a wall, ready to absorb door impacts.
Operating Instructions
The Blomus 65353 Wall Mounted Door Stop operates passively. Once installed, it functions automatically to protect your walls from door impacts. No active operation is required.
- Ensure the door stop is firmly attached to the wall.
- The synthetic bumper is designed to absorb the impact of the door, preventing damage.
Maintenance
To ensure the longevity and appearance of your Blomus door stop, follow these simple maintenance guidelines:
- Cleaning: Wipe the stainless steel and synthetic parts with a soft, damp cloth. For stubborn marks, a mild soap solution can be used, followed by drying with a clean cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
- Inspection: Periodically check the door stop for any signs of loosening from the wall. If it feels loose, gently retighten the mounting screw.
- Bumper Condition: Inspect the synthetic bumper for wear or damage. While designed for durability, extreme or prolonged impact can cause wear over time.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Door stop is loose on the wall. | Mounting screw is not tight enough or wall anchor is failing. | Gently retighten the mounting screw. If it continues to loosen, consider using a more robust wall anchor or relocating the door stop to a stud if possible. |
| Door still hits the wall. | Incorrect placement of the door stop. | Re-evaluate the optimal placement for the door stop. It should be positioned to intercept the door or door handle before it makes contact with the wall. |
| Bumper shows signs of wear or damage. | Frequent or forceful impacts. | While the bumper is durable, extreme force can cause wear. If severely damaged, contact Blomus customer support for potential replacement parts or consider replacing the unit. |
Specifications
| Attribute | Detail |
|---|---|
| Brand | Blomus |
| Model Number | 65353 |
| Mounting Type | Wall Mount |
| Material | Stainless Steel / Synthetic |
| Color | Silver/Black |
| Style | Elegantly Modern |
| Product Dimensions (L x W x Th) | 0.98" x 0.98" x 1.57" (2.5 cm x 2.5 cm x 4 cm) |
| Finish Type | Glossy |
| Item Weight | 1.06 ounces (approx. 30 grams) |
| Number of Pieces | 1 |
Warranty and Support
Blomus products are manufactured to high quality standards. This product comes with a 2-year manufacturer defect warranty.
For warranty claims, technical support, or inquiries regarding replacement parts, please contact Blomus customer service through their official website or the retailer from whom you purchased the product. Please have your model number (65353) and proof of purchase ready when contacting support.
Note: Warranty does not cover damage due to improper installation, misuse, or normal wear and tear.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.