Altair Lighting 3-Inch Recessed Light Kit with Swivel Trim Instruction Manual

1. Introduction

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Altair Lighting 3-inch Recessed Light Kit. This kit includes two non-IC (Non-Insulation Contact) remodel cans with swivel gimbal trims and 50-watt bulbs. Please read all instructions carefully before beginning installation and retain this manual for future reference.

2. Safety Information

WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing.

• Installation must be performed by a qualified electrician or a person familiar with the construction and operation of the product and the hazards involved.
• Observe all local electrical codes and ordinances, as well as the National Electrical Code (NEC).
• This fixture is suitable for indoor use in damp locations.
• Use only supply conductors rated for a minimum of 90°C.
• Maximum of 4 No. 12 AWG conductors permitted in the junction box.
• Ensure all electrical connections are secure and properly insulated.
• Do not install insulation within 3 inches of the fixture housing. This is a non-IC rated fixture.

3. Package Contents

Your Altair Lighting 3-inch Recessed Light Kit includes:

• 2 x 3-inch Recessed Light Fixtures (Model AL-2665T)
• 2 x Swivel Gimbal Trims
• 2 x 50-watt Bulbs (E26 base)
• Mounting clips for 3/8", 1/2", and 5/8" thick wallboard

This image displays two Altair Lighting 3-inch recessed light fixtures. Each fixture consists of a white cylindrical housing with a swivel gimbal trim containing a bulb, and an attached metal junction box. Text on the housing indicates model number AL-2665T and wiring specifications.

4. Specifications

5. Installation Instructions

Before You Begin:

• Turn off power at the circuit breaker or fuse box.
• Ensure you have all necessary tools: measuring tape, drywall saw, wire strippers, screwdriver, safety glasses.
• Verify that the ceiling material thickness is compatible (3/8", 1/2", or 5/8").

5.1. Prepare the Ceiling Opening

1. Determine the desired location for each recessed light fixture.
2. Using a template or the fixture itself, mark a 3-inch diameter circle on the ceiling.
3. Carefully cut the marked circle using a drywall saw. Ensure the hole is precise to allow the fixture to fit snugly.

5.2. Wiring the Fixture

Access above the ceiling is required for proper wiring and installation.

1. Open the junction box cover on the top of the recessed light fixture.
2. Remove the appropriate knockout(s) for your electrical cable entry.
3. Feed the electrical supply cable (rated for 90°C minimum) into the junction box. Ensure the cable is secured with a suitable cable connector (not included).
4. Connect the house wiring to the fixture wiring using appropriate wire connectors (not included):
   • Connect the black (hot) wire from the supply to the black wire of the fixture.
   • Connect the white (neutral) wire from the supply to the white wire of the fixture.
   • Connect the bare copper or green (ground) wire from the supply to the green ground screw or wire in the junction box.
5. Carefully tuck all wires into the junction box and secure the cover.

5.3. Mounting the Fixture

1. Insert the wired recessed light fixture into the prepared ceiling opening.
2. Engage the remodel clips by pushing them outwards until they firmly grip the ceiling material. These clips are designed to secure the fixture in place for 3/8", 1/2", and 5/8" thick wallboard.
3. Ensure the fixture is flush with the ceiling surface.

5.4. Bulb Installation

1. Screw the provided 50-watt E26 base bulb into the socket within the swivel trim. Do not overtighten.
2. Adjust the swivel trim to direct the light as desired.

6. Operation

Once installation is complete and power is restored, the recessed light fixture can be operated via a standard wall switch (toggle type) or a compatible touch control system. The swivel trim allows for directional light adjustment after installation.

7. Maintenance

7.1. Cleaning

To clean the fixture, ensure power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.

7.2. Bulb Replacement

To replace a bulb:

1. Turn off power to the fixture at the circuit breaker.
2. Allow the bulb to cool completely before handling.
3. Carefully unscrew the old bulb from the socket.
4. Screw in a new E26 base bulb of the same wattage (50W) or a compatible LED equivalent. Ensure the replacement bulb's specifications are suitable for recessed lighting and the fixture's rating.
5. Restore power and test the light.

8. Troubleshooting

If your recessed light fixture is not functioning correctly, refer to the following common issues:

• Light does not turn on:
  • Check if the power is on at the circuit breaker.
  • Ensure the bulb is securely screwed into the socket and is not burnt out.
  • Verify all wire connections in the junction box are secure.
• Light flickers:
  • Check for loose wire connections.
  • Ensure the bulb is fully seated.
  • If using a dimmer, ensure it is compatible with the bulb type.
• Fixture is loose in ceiling:
  • Ensure the remodel clips are fully engaged and gripping the ceiling material.

If these steps do not resolve the issue, consult a qualified electrician.

9. Warranty and Support

For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact Altair Lighting customer service. Keep your purchase receipt as proof of purchase.