Introduction
Thank you for choosing the Bisk Deco Ceramic Wall Mounted Soap Dispenser. This manual provides essential information for the safe installation, operation, and maintenance of your new product. Please read these instructions carefully before installation and retain them for future reference.
This wall-mounted soap dispenser features a ceramic bottle and an antique brass holder, designed to complement classically decorated bathrooms. Its robust construction ensures lasting good looks and reliable performance.
Package Contents
Please verify that all components are present before beginning installation:
- 1 x Ceramic Soap Dispenser Bottle with Pump
- 1 x Wall Mounted Holder (Antique Brass Finish)
- 1 x Wall Fixing Kit (Screws, Wall Plugs, Allen Key if required)
This image shows the Bisk Deco Ceramic Wall Mounted Soap Dispenser. It features a white ceramic dispenser bottle held within an antique brass wall-mounted frame. The pump mechanism is also in an antique brass finish.
Safety Information
- Always ensure the mounting surface is suitable and strong enough to support the dispenser's weight when full.
- Use appropriate tools for installation. If unsure, consult a qualified professional.
- Keep small parts of the fixing kit out of reach of children.
- Avoid using abrasive cleaners or harsh chemicals on the ceramic or brass surfaces, as this may damage the finish.
- Handle the ceramic bottle with care to prevent breakage.
Setup and Installation
This soap dispenser is designed for secure wall fitting with concealed fixings.
- Choose Location: Select a suitable wall location, ensuring it is free from hidden pipes or electrical wires. Mark the desired height for the dispenser.
- Mark Drilling Points: Hold the wall-mounted holder against the wall at the chosen height. Use a pencil to mark the positions for the drilling holes. Ensure the marks are level.
- Drill Holes: Using an appropriate drill bit for your wall type (e.g., masonry for brick/concrete, wood for studs), drill holes at the marked positions. The drill bit size should match the wall plugs provided.
- Insert Wall Plugs: Insert the wall plugs into the drilled holes until they are flush with the wall surface.
- Attach Mounting Plate (if applicable): Some concealed fixing systems use a separate mounting plate. If your kit includes one, attach it to the wall using the screws provided, ensuring it is firmly secured.
- Secure Holder: Align the wall-mounted holder with the mounting plate or directly with the wall plugs. Insert the screws and tighten them securely. For concealed fixings, there may be small grub screws on the underside of the holder that need to be tightened with an Allen key to secure it to the mounting plate.
- Insert Ceramic Bottle: Carefully place the ceramic soap dispenser bottle into the secured wall holder.
Operating Instructions
- Filling the Dispenser: Remove the pump mechanism from the top of the ceramic bottle by twisting it counter-clockwise. Pour your preferred liquid soap into the ceramic bottle, ensuring not to overfill.
- Reattaching the Pump: Carefully reinsert the pump mechanism into the bottle opening and twist clockwise until securely fastened.
- Dispensing Soap: Press down on the pump head to dispense liquid soap. The first few pumps may require priming to draw the soap up the tube.
Maintenance
Regular cleaning will help maintain the appearance and functionality of your soap dispenser.
- Ceramic Bottle: Clean the ceramic bottle with warm water and a mild, non-abrasive soap. Rinse thoroughly and dry with a soft cloth.
- Antique Brass Holder: Wipe the antique brass holder with a soft, damp cloth. For stubborn marks, use a mild, non-abrasive cleaner specifically designed for brass or antique finishes. Avoid harsh chemicals, abrasive pads, or polishes that could strip the antique coating.
- Pump Mechanism: If the pump becomes clogged or sticky, remove it from the bottle and rinse it under warm running water. You can also pump warm water through it to clear any blockages.
- General Care: Periodically check the wall fixings to ensure they remain tight and secure.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump not dispensing soap | Pump is not primed; bottle is empty; pump mechanism is clogged. | Press the pump head several times to prime it. Refill the bottle. Remove and rinse the pump mechanism under warm water. |
| Dispenser feels loose on the wall | Wall fixings have loosened. | Gently tighten the mounting screws. If the issue persists, re-evaluate the wall plugs and mounting surface. |
| Soap leaks from pump base | Pump not securely tightened; damaged seal. | Ensure the pump mechanism is twisted tightly onto the bottle. If leakage continues, the pump seal may be damaged. |
Specifications
- Model Number: 02213
- ASIN: B00BFQLF2A
- Brand: Bisk
- Material: Brass, Copper (holder); Ceramic (bottle)
- Finish: Antique Brass
- Shape: Cylindrical
- Item Weight: 1.1 pounds (approx.)
- Package Dimensions: 10 x 5.12 x 3.39 inches (approx.)
- Mounting Type: Wall Mounted, Concealed Fixing
Warranty and Support
Bisk products are manufactured to high-quality standards. For specific warranty information or technical support, please refer to the documentation provided at the point of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.