KKDYWQZEE Xfinity Digital Transport Adapter Remote Control User Manual

1. Introduction

This manual provides instructions for the setup, operation, and maintenance of the KKDYWQZEE Xfinity Digital Transport Adapter Remote Control. This remote is designed to operate with Comcast Digital Transport Adapters (DTAs).

Image 1: Front view of the Xfinity Digital Transport Adapter Remote Control. The remote is black with various control buttons.

2. Package Contents

Verify that all items are present in the package:

• KKDYWQZEE Xfinity Digital Transport Adapter Remote Control
• AA Batteries (x2)

3. Setup

3.1. Battery Installation

1. Locate the battery compartment cover on the back of the remote control.
2. Slide the cover downwards or press the latch and lift to open the compartment.
3. Insert two (2) AA batteries, ensuring the positive (+) and negative (-) terminals align with the markings inside the compartment.
4. Replace the battery compartment cover, sliding it back into place until it clicks securely.

Note: Always use fresh batteries. Do not mix old and new batteries, or different types of batteries.

3.2. Initial Setup and Pairing

This remote control is pre-programmed to work with most Comcast Digital Transport Adapters (DTAs) directly out of the box. No programming is typically required for basic DTA functions.

To control your television's power, volume, and mute functions, the remote may need to be programmed with a TV code. Refer to the programming instructions provided by Comcast or your DTA documentation for specific TV codes and programming steps. General steps often involve:

1. Turn on your television.
2. Press and hold the SETUP button on the remote until the indicator light (usually red) blinks twice.
3. Enter the 3-digit TV code for your television brand. The indicator light should blink twice again if the code is accepted.
4. Test the POWER, VOLUME UP/DOWN, and MUTE buttons. If they function correctly, the remote is programmed. If not, try other codes for your TV brand or repeat the process.

4. Operating Instructions

The remote control features various buttons for navigating and controlling your Digital Transport Adapter and, if programmed, your television.

• POWER: Turns the DTA and/or TV on or off.
• CH +/-: Changes channels up or down.
• VOL +/-: Adjusts the television volume up or down (if programmed).
• MUTE: Mutes or unmutes the television sound (if programmed).
• NUMBER PAD (0-9): Directly enters channel numbers.
• LAST: Returns to the previously viewed channel.
• INFO: Displays program information.
• MENU: Accesses the DTA menu.
• ARROW BUTTONS (UP/DOWN/LEFT/RIGHT): Navigates through menus and guides.
• OK/SELECT: Confirms selections in menus.
• EXIT: Exits menus or guides.
• GUIDE: Opens the program guide.
• A/B/C/D Buttons: May be used for specific functions within certain DTA menus or applications.

5. Maintenance

5.1. Cleaning

To clean the remote control, use a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water. Do not use harsh chemicals, abrasive cleaners, or allow liquids to enter the remote.

5.2. Battery Replacement

Replace batteries when the remote's performance degrades or if the indicator light does not respond as expected. Follow the battery installation steps in Section 3.1.

Caution: Dispose of used batteries according to local regulations. Do not expose batteries to excessive heat or fire.

6. Troubleshooting

• Remote not responding:
  • Check if the batteries are correctly inserted and have sufficient charge. Replace if necessary.
  • Ensure there are no obstructions between the remote and the DTA/TV.
  • Verify that the remote is pointed directly at the DTA/TV's infrared sensor.
• TV volume/power buttons not working:
  • Confirm that the remote has been programmed with the correct TV code (refer to Section 3.2).
  • Try re-programming the remote with a different TV code for your television brand.
• Buttons are sticky or unresponsive:
  • Clean the remote control as described in Section 5.1.
  • If the issue persists, the remote may require replacement.

7. Specifications

8. Warranty and Support

For warranty information or technical support, please refer to the documentation provided with your purchase or contact the retailer. Keep your purchase receipt as proof of purchase for any warranty claims.

For specific DTA programming assistance, please consult your Comcast service provider's support resources.