Torklift R3505 Rear Tie Down Instruction Manual

1. Introduction

The Torklift R3505 Rear Tie Down is an essential component designed for securely attaching a truck camper to your vehicle. This hitch-mounted, aftermarket rear tie-down system is engineered for durability and reliable performance, specifically compatible with SuperHitch and Magnum systems. It ensures your camper remains stable and safe during transport.

Key Features:

• Vehicle Compatibility: Designed for a wide range of vehicles including all-terrain vehicles, utility vehicles, off-road motorcycles, street-sport motorcycles, street-cruiser motorcycles, street-touring motorcycles, street-motor scooters, snowmobiles, and marine personal craft.
• Robust Construction: Manufactured from alloy steel and stainless steel with a powder-coated finish for enhanced durability and corrosion resistance.
• Dimensions: Package dimensions are approximately 50.165 cm (H) x 21.59 cm (L) x 22.225 cm (W).
• Weight: The package weighs approximately 10.432 kilograms (23 pounds).
• Origin: Proudly manufactured in the United States.

2. Safety Information

Always prioritize safety during installation and use. Failure to follow these instructions could result in property damage, serious injury, or death.

• Read all instructions thoroughly before beginning installation.
• Ensure all components are present and undamaged before installation.
• Wear appropriate personal protective equipment, including safety glasses and gloves.
• Do not exceed the weight capacity of your vehicle, hitch, or tie-down system.
• Regularly inspect the tie-downs for wear, damage, or loose fasteners.
• Consult your vehicle's owner's manual and camper's manual for additional safety guidelines.

3. Package Contents

The Torklift R3505 Rear Tie Down package includes the following:

• Main R3505 Rear Tie Down component.

Note: Fasteners and additional mounting hardware may be sold separately or as part of a complete system. Refer to your specific vehicle application guide for required hardware.

4. Setup and Installation

The Torklift R3505 Rear Tie Down is designed for vehicle-specific fitment and typically mounts to the vehicle's frame or hitch receiver. Professional installation is recommended. The following steps provide a general overview; always refer to the detailed instructions provided with your specific vehicle application kit.

General Installation Steps:

1. Prepare Vehicle: Park the vehicle on a level surface and engage the parking brake. If working underneath the vehicle, ensure it is properly supported with jack stands.
2. Identify Mounting Points: Locate the designated mounting points on your vehicle's frame or hitch receiver, as specified in your vehicle-specific installation guide.
3. Position Tie Down: Carefully position the R3505 Rear Tie Down component against the identified mounting points. Ensure proper alignment.
4. Secure Hardware: Insert the appropriate fasteners (bolts, washers, nuts) through the tie-down and vehicle frame. Hand-tighten all hardware initially.
5. Final Tightening: Once all hardware is in place and aligned, progressively tighten all fasteners to the torque specifications provided in your vehicle-specific installation guide. Use a torque wrench for accuracy.
6. Verify Installation: After tightening, visually inspect all connections to ensure they are secure and that the tie-down is firmly attached to the vehicle.

Image 1: The Torklift R3505 Rear Tie Down, a black, powder-coated metal component with a rectangular main bar and mounting brackets at each end. This image shows the primary structure of the tie-down.

Image 2: An angled perspective of the Torklift R3505 Rear Tie Down, highlighting the design of the angled bracket and the various attachment points for secure installation.

Image 3: A compact view of the Torklift R3505 Rear Tie Down, providing an overview of its overall structure and the configuration of its mounting points.

5. Operating Instructions

Once the Torklift R3505 Rear Tie Downs are securely installed on your vehicle, they provide the attachment points for securing your truck camper. Always use appropriate turnbuckles or securing devices (sold separately) to connect the camper to the tie-downs.

1. Load Camper: Carefully load your truck camper onto your vehicle, ensuring it is centered and properly seated according to your camper's manufacturer guidelines.
2. Attach Turnbuckles: Connect the rear turnbuckles from your camper to the designated attachment points on the R3505 Rear Tie Downs.
3. Adjust Tension: Adjust the turnbuckles to achieve proper tension. The goal is to secure the camper firmly without over-tightening, which can damage the camper or vehicle. Follow the turnbuckle manufacturer's instructions for correct tensioning.
4. Pre-Trip Check: Before each trip, verify that all turnbuckles are securely attached and properly tensioned. Check for any signs of loosening or wear.

6. Maintenance

Regular maintenance ensures the longevity and safe operation of your Torklift R3505 Rear Tie Downs.

• Routine Inspection: Periodically inspect the tie-downs for any signs of rust, corrosion, cracks, bends, or other damage. Pay close attention to weld points and mounting areas.
• Fastener Check: Regularly check all mounting bolts and nuts for tightness. Re-torque to manufacturer specifications if necessary.
• Cleaning: Clean the tie-downs with mild soap and water to remove dirt, salt, and road grime. Rinse thoroughly and allow to dry.
• Protective Coating: If the powder coat finish is chipped or damaged, touch up with appropriate rust-inhibiting paint to prevent corrosion.

7. Troubleshooting

This section addresses common issues you might encounter with your rear tie-downs.

• Loose Tie-Downs: If the tie-downs feel loose or exhibit excessive movement, re-check all mounting hardware for proper torque. Ensure the tie-downs are correctly seated against the vehicle frame.
• Noise/Rattling: Rattling can often be caused by loose hardware or improper tensioning of turnbuckles. Inspect all connections and adjust as needed. Ensure no components are contacting other parts of the vehicle during travel.
• Difficulty Attaching Turnbuckles: Ensure the camper is properly positioned on the truck bed. If the tie-down points are misaligned, the camper may need to be adjusted.
• Visible Damage: If any part of the tie-down system shows signs of significant damage (e.g., severe bends, cracks, broken welds), discontinue use immediately and replace the affected components. Do not attempt to repair structural damage.

8. Specifications

9. Warranty Information

Specific warranty details for the Torklift R3505 Rear Tie Down are not provided in this document. For comprehensive warranty information, please refer to the official Torklift website or contact Torklift customer service directly. Keep your proof of purchase for any warranty claims.

10. Support

If you require further assistance with the installation, operation, or troubleshooting of your Torklift R3505 Rear Tie Down, please contact Torklift International customer support. You can typically find contact information on their official website or through your authorized dealer.

Website: www.torklift.com (This is a general link, specific support pages may vary)