Introduction
This manual provides essential information for the safe and effective use of your Valex 1651007 Hydraulic Bottle Jack. Please read and understand all instructions before operating the jack. Proper use and maintenance will ensure optimal performance and extend the life of your equipment.
The Valex 1651007 is a robust hydraulic bottle jack designed for lifting vehicles and other heavy objects up to a maximum capacity of 3000 kg (3 tons). It features a durable alloy steel construction and a minimum height of 195 mm, making it suitable for various lifting tasks.
Safety Information
WARNING: Failure to follow these safety instructions may result in serious injury or property damage.
- Always read and understand the entire manual before use.
- Never exceed the rated capacity of 3000 kg.
- Use the jack only on a hard, level surface.
- Ensure the load is centered on the jack saddle.
- Always use appropriate jack stands to support the load immediately after lifting. Never rely solely on the jack for support.
- Do not use the jack for purposes other than lifting. It is not designed for supporting a load for extended periods.
- Wear appropriate personal protective equipment (PPE), such as safety glasses and gloves.
- Inspect the jack for damage or leaks before each use. Do not use if damaged.
- Keep children and bystanders away from the work area.
Product Overview
The Valex 1651007 Hydraulic Bottle Jack is a compact and powerful tool for lifting heavy loads. Familiarize yourself with its components before operation.
Image 1: Valex 1651007 Hydraulic Bottle Jack. This image shows the complete bottle jack, highlighting its compact design and robust construction, including the base, cylinder, ram, and release valve.
Image 2: Detail view of the Valex Hydraulic Bottle Jack. This image provides a closer look at a specific part of the jack, possibly the pump mechanism or the top saddle, indicating its sturdy build.
Setup
- Preparation: Ensure the jack is on a firm, level surface. The vehicle or object to be lifted should be on a level surface with the parking brake engaged and wheels chocked if applicable.
- Check Hydraulic Fluid: Before first use, or if the jack has been stored for a long time, check the hydraulic fluid level. To do this, fully lower the ram, remove the oil filler plug, and ensure the fluid is level with the bottom of the filler hole. Add hydraulic jack oil if necessary.
- Purge Air (if necessary): If the jack does not lift properly or feels spongy, it may have air in the system. To purge air, open the release valve completely, remove the oil filler plug, and pump the handle several times. Close the release valve and replace the filler plug.
- Positioning: Place the jack directly under the vehicle's designated lifting point. Consult your vehicle's owner's manual for proper lifting points.
Operating Instructions
Lifting the Load:
- Ensure the release valve is fully closed by turning it clockwise until snug. Do not overtighten.
- Insert the handle into the pump socket.
- Pump the handle steadily up and down to raise the jack ram and lift the load.
- Once the desired height is reached, immediately place appropriately rated jack stands under the load at the designated support points.
- Slowly lower the load onto the jack stands by gently turning the release valve counter-clockwise.
Lowering the Load:
- Ensure the area around the load is clear.
- If the load is on jack stands, slightly raise the load with the jack to remove the jack stands.
- Slowly turn the release valve counter-clockwise to gradually lower the load. Do not open the valve too quickly, as this can cause the load to drop rapidly.
- Once the load is fully lowered, remove the jack.
Maintenance
- Lubrication: Periodically lubricate moving parts with light machine oil.
- Hydraulic Fluid: Check the hydraulic fluid level every three months or as needed. Use only high-quality hydraulic jack oil. Do not use brake fluid or motor oil.
- Cleaning: Keep the jack clean and free of dirt, grease, and debris.
- Storage: Store the jack in a dry, clean place with the ram fully lowered to prevent corrosion and extend seal life.
- Inspection: Regularly inspect the jack for any signs of damage, wear, or leaks. If any issues are found, do not use the jack and have it serviced by a qualified technician.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Jack will not lift load. | Release valve open; air in system; low hydraulic fluid; overloaded. | Close release valve; purge air; add hydraulic fluid; reduce load (do not exceed capacity). |
| Jack lifts slowly or erratically. | Air in system; low hydraulic fluid; worn seals. | Purge air; add hydraulic fluid; contact service for seal replacement. |
| Jack leaks fluid. | Damaged seals; loose fittings. | Contact service for seal replacement; tighten fittings (if accessible and safe). |
| Jack will not lower. | Release valve stuck; mechanical obstruction. | Gently tap release valve; check for obstructions; contact service. |
Specifications
The following table details the specifications for the Valex Hydraulic Bottle Jack, including various models for comparison. Your specific model is the 3000 kg version (Model 1651007).
Image 3: Specifications table for Valex Hydraulic Bottle Jacks. This table provides a comparative overview of different models, detailing their capacity (portata kg), minimum/maximum height (altezza min/max mm), and net weight (peso netto kg).
| Feature | Specification (Model 1651007 - 3000KG) |
|---|---|
| Brand | Valex |
| Model Number | 1651007 |
| Maximum Load Capacity | 3000 kg (3 tons) |
| Minimum Height | 195 mm |
| Maximum Height | 372 mm (Note: The comparative table shows 363 mm for 3000kg. Please verify with product label.) |
| Net Weight | 3 Kilogrammes (Note: The comparative table shows 3.3 kg for 3000kg.) |
| Material | Alloy Steel |
| Package Dimensions | 20.5 x 11.5 x 10 cm |
| Vehicle Service Type | Motorcycle (Note: A 3000kg jack is typically used for cars and light trucks. Please ensure compatibility with your specific vehicle.) |
Comparative Specifications (from Image 3)
| Capacity (kg) | Min/Max Height (mm) | Net Weight (kg) |
|---|---|---|
| 3,000 | 188 / 363 | 3.3 |
| 5,000 | 207 / 402 | 4.4 |
| 10,000 | 222 / 447 | 6.4 |
| 15,000 | 227 / 457 | 8.2 |
Warranty and Support
For warranty information and customer support, please refer to the documentation included with your purchase or contact Valex customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.
Always ensure to use genuine Valex replacement parts if any components require servicing.