LEGO 60005

LEGO City Fire Station 60005 Instruction Manual

Model: 60005

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your LEGO City Fire Station set, model 60005. Please read through all sections carefully to ensure a complete and enjoyable building experience. This set is designed for ages 6 and up.

Product Overview

The LEGO City Fire Station 60005 is a comprehensive building set featuring a 3-story fire station, multiple vehicles, and minifigures. This set allows for imaginative play scenarios involving fire rescue operations within LEGO City.

Key Components:

  • 3-Story Fire Station: Includes a control room, living quarters, and two retracting garage doors.
  • Fire Truck: Equipped with a water dart-launching mechanism and an extendable ladder.
  • Fire Van: A smaller support vehicle for quick response.
  • Fire Helicopter: Features rotating blades and LEGO splat elements for aerial support.
  • 5 Minifigures: A fire chief, a pilot, and three firefighters, each with assorted accessories.
  • Accessories: Firefighting equipment, flames, furniture, a computer, tool box with tools, axe, chainsaw, telephone, walkie-talkies, and a cup.
LEGO City Fire Station 60005 main image showing the assembled fire station with vehicles and minifigures.

Image: The complete LEGO City Fire Station 60005 set, showcasing the main building, fire truck, fire van, helicopter, and minifigures.

Assembly Instructions

The LEGO City Fire Station 60005 set contains 752 pieces. Assembly is required and should be performed by following the step-by-step visual instructions provided in the separate building guide included in the product packaging. Ensure all pieces are accounted for before beginning assembly.

General Assembly Steps:

  1. Unpack Components: Carefully open the box and sort the LEGO bricks by color and type, if desired, to facilitate easier building.
  2. Follow Building Guide: Refer to the numbered bags and corresponding sections in the instruction booklet. Build each section sequentially as indicated.
  3. Connect Modules: Once individual sections (e.g., station floors, vehicles) are complete, connect them according to the final steps in the guide to form the complete fire station.
  4. Verify Completion: Double-check that all pieces are correctly placed and the structure is stable.
Illustration of LEGO bricks being assembled.

Image: An example of LEGO bricks being connected during the assembly process.

Operating Instructions

Once assembled, the LEGO City Fire Station offers various interactive features for play.

Fire Station Features:

  • Sliding Pole: Position a minifigure at the top of the pole and slide them down to simulate a quick response.
  • Garage Doors: Manually slide the garage doors up and down to allow vehicles to enter and exit the station.
  • Control Room: Place minifigures in the control room to monitor emergency calls and direct operations.

Vehicle Operation:

  • Fire Truck: Extend and retract the ladder. Load the water dart into the launcher and press the trigger to simulate water discharge.
  • Fire Helicopter: Manually rotate the helicopter blades. Attach LEGO splat elements to simulate dropping water or foam.
  • Fire Van: Position minifigures inside the van for transport to emergency sites.

Maintenance

Proper care will ensure the longevity of your LEGO set.

Cleaning Your LEGO Bricks:

  • Hand Washing: Clean LEGO bricks by hand using lukewarm water (not exceeding 40°C or 104°F) and a mild detergent.
  • Rinsing: Rinse the bricks thoroughly with clear water.
  • Drying: Allow bricks to air dry at room temperature. Avoid direct sunlight or high heat, as this can deform the plastic.
  • Avoid Harsh Chemicals: Do not use abrasive cleaners, alcohol, or chemical solvents, as these can damage the plastic.

Note: Electronic components, if any, should not be submerged in water.

Troubleshooting

Missing Pieces:

If you discover any missing pieces during assembly, please refer to the contact information provided in the Warranty and Support section to request replacement parts directly from LEGO Customer Service. Ensure you have the set number (60005) and the specific part number (found in the building guide) ready.

Assembly Difficulties:

If you encounter difficulties with assembly, re-examine the instruction booklet carefully. Ensure that all pieces are oriented correctly and firmly pressed together. Sometimes, a small piece may be overlooked or incorrectly placed, affecting subsequent steps.

Specifications

FeatureDetail
BrandLEGO
Model NameCity Fire Station
Model Number60005 (also known as 60004, 6021715)
Number of Pieces752
Material TypePlastic
Item DimensionsApproximately 18.9 x 3.7 x 14.88 inches (packaged)
Item Weight1.9 Pounds
Recommended Age72 months (6 years) to 1500 months (125 years)
Educational ObjectiveTeam Building Skills

Warranty and Support

This LEGO product is designed for durability and enjoyment. While specific warranty information is not provided, LEGO Group is known for its commitment to customer satisfaction.

Customer Support:

For assistance with missing parts, assembly questions, or other product-related inquiries, please visit the official LEGO customer service website or contact their support line. Have your set number (60005) and any relevant part numbers ready for efficient service.

Note: Manufacturer warranty details may vary by region. Please refer to the official LEGO website for the most current support information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.