Introduction
The BLACK+DECKER 20V MAX* LED Work Light (BDCF20) provides portable and efficient illumination for various tasks. Designed for versatility, it features an articulating LED head to direct light precisely where needed. This work light is compatible with BLACK+DECKER 20V MAX* lithium-ion batteries (sold separately), offering up to 70 lumens of brightness and extended runtime for your projects.
Safety Information
Always observe basic safety precautions when using this product to reduce the risk of fire, electric shock, or personal injury. Please read and understand all instructions before operation.
- Eye Protection: Do not look directly into the LED light. The intense light can cause temporary vision impairment or eye damage.
- Battery Compatibility: Use only with BLACK+DECKER 20V MAX* lithium-ion battery packs. Use of any other battery pack may create a risk of injury and fire.
- Environmental Conditions: Do not expose the work light to rain or wet conditions. Water entering the light will increase the risk of electric shock.
- Storage: Store the work light out of reach of children and untrained persons.
- Maintenance: Do not attempt to modify or repair the work light. Refer all servicing to qualified repair personnel.
Components
The BLACK+DECKER 20V MAX* LED Work Light (BDCF20) package includes:
- 1 x BLACK+DECKER 20V MAX* LED Work Light (BDCF20)
Note: Battery pack and charger are sold separately and are required for operation.
Setup
Battery Installation
To prepare your work light for use, you must first install a compatible BLACK+DECKER 20V MAX* battery pack.
- Ensure the work light is in the OFF position.
- Align the battery pack with the receptacle on the base of the work light.
- Slide the battery pack into the work light until it clicks securely into place. A firm click indicates proper installation.
- To remove the battery, press the battery release button (usually located on the battery itself) and slide the battery pack out of the work light.
Image: The BLACK+DECKER 20V MAX* LED Work Light, showing the base where the 20V MAX* battery (not included) is inserted.
Operating Instructions
Turning On/Off
Once the battery is securely installed, operating the work light is straightforward:
- To turn the work light ON, press the power button located on the handle.
- To turn the work light OFF, press the power button again.
Adjusting the Light Head
The work light features an articulating LED head, allowing you to direct the light beam to your desired area.
- Gently pivot the LED head to the desired angle. The head is designed to hold its position once adjusted.
Image: A person using the BLACK+DECKER work light to illuminate a dark area under a staircase, demonstrating the adjustable head's utility.
Image: A person holding the BLACK+DECKER work light to brightly illuminate an open electrical panel, highlighting its use in detailed tasks.
Image: A person positioning the BLACK+DECKER work light under a kitchen sink to illuminate plumbing, showcasing its compact size and directed lighting capability.
Maintenance
Cleaning
Regular cleaning helps maintain the performance and longevity of your work light.
- Clean the exterior surfaces of the work light with a soft, damp cloth.
- Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the plastic components.
- Ensure the light is off and the battery is removed before cleaning.
Storage
Proper storage protects your work light when not in use.
- Store the work light in a dry, cool place, away from direct sunlight and moisture.
- If storing for extended periods, remove the battery pack from the work light.
Troubleshooting
If you encounter issues with your BLACK+DECKER 20V MAX* LED Work Light, refer to the table below for common problems and solutions.
| Problem | Possible Cause / Solution |
|---|---|
| Light does not turn on. |
|
| Light is dim or flickers. |
|
| Light head does not stay in position. |
|
Specifications
Key technical specifications for the BLACK+DECKER 20V MAX* LED Work Light (BDCF20):
| Feature | Detail |
|---|---|
| Model Number | BDCF20 |
| Voltage | 20 Volts MAX* |
| Brightness | Up to 70 Lumens |
| Light Source Type | LED |
| Power Source | Battery Powered (20V MAX* Lithium Ion) |
| Item Weight | 9.1 ounces (without battery) |
| Product Dimensions | 9.31 x 3.38 x 7.63 inches |
*Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
Warranty and Support
For detailed warranty information, product registration, or to contact customer support, please visit the official BLACK+DECKER website. Keep your purchase receipt as proof of purchase for any warranty claims. You can also find additional resources and frequently asked questions on their support pages.
Website: www.blackanddecker.com
