Philips HR1351/90 Hand Blender with Chopping Attachment Instruction Manual

1. Introduction

Thank you for choosing the Philips HR1351/90 Hand Blender with Chopping Attachment. This appliance is designed for efficient blending and chopping of various food ingredients. Please read this instruction manual carefully before first use and keep it for future reference. Proper use and maintenance will ensure optimal performance and extend the lifespan of your appliance.

This image displays the complete Philips HR1351/90 Hand Blender set. On the right is the white main motor unit with a yellow power button. To its left, a transparent chopping attachment with a white lid contains chopped red onions, demonstrating its function. Further left and slightly behind the chopper is a clear measuring beaker with a handle and measurement markings.

2. Important Safety Instructions

Always observe the following basic safety precautions when using electrical appliances:

• Read all instructions before use.
• Do not immerse the motor unit in water or any other liquid. Clean only with a damp cloth.
• Keep hands and utensils away from the moving blades during operation to prevent injury.
• Blades are sharp. Handle with care, especially when removing or cleaning.
• Unplug the appliance from the outlet when not in use, before assembling or disassembling parts, and before cleaning.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
• This appliance is for household use only. Do not use outdoors.
• Ensure the voltage indicated on the appliance corresponds to the local mains voltage before connecting.
• Supervise children to ensure they do not play with the appliance.
• Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
• Do not use attachments not recommended or sold by the manufacturer.
• The operating switch may require firm pressure to activate. This design feature helps prevent overheating of the motor windings.

3. Product Components

The Philips HR1351/90 Hand Blender includes the following components:

1. Motor Unit: The main power unit with the operating switch.
2. Blending Bar: Detachable plastic bar with stainless steel blades for blending.
3. Chopping Attachment: Consists of a chopping bowl, a blade unit, and a lid.
4. Measuring Beaker: A transparent container for blending and measuring ingredients.

4. Setup and Assembly

4.1 Assembling the Hand Blender

1. Ensure the motor unit is unplugged.
2. Align the blending bar with the motor unit.
3. Push the blending bar onto the motor unit until it clicks into place.
4. To detach, press the release buttons (if present) and pull the blending bar off.

4.2 Assembling the Chopping Attachment

1. Ensure the motor unit is unplugged.
2. Place the blade unit onto the central pin inside the chopping bowl.
3. Add your ingredients to the chopping bowl. Do not overfill.
4. Place the lid onto the chopping bowl, ensuring it is securely fitted.
5. Attach the motor unit to the lid of the chopping attachment by aligning and twisting until it locks.

5. Operating Instructions

5.1 Using the Hand Blender

1. Assemble the hand blender as described in Section 4.1.
2. Immerse the blending bar into the ingredients in a suitable container (e.g., the measuring beaker).
3. Plug in the appliance.
4. Press and hold the operating switch to start blending. The appliance has 2 speeds.
5. Move the blender up and down gently to ensure even blending.
6. Release the operating switch to stop.
7. Unplug the appliance after use.

5.2 Using the Chopping Attachment

1. Assemble the chopping attachment as described in Section 4.2.
2. Plug in the appliance.
3. Press and hold the operating switch to start chopping. Use short pulses for coarse chopping, or hold longer for finer results.
4. Release the operating switch to stop.
5. Unplug the appliance after use and carefully disassemble to remove chopped ingredients.

6. Cleaning and Maintenance

Regular cleaning ensures hygiene and prolongs the life of your appliance.

• Always unplug the appliance before cleaning.
• Motor Unit: Wipe the motor unit with a damp cloth. Never immerse it in water or rinse it under the tap.
• Blending Bar, Chopping Attachment (bowl, blade unit, lid), Measuring Beaker: These parts are dishwasher proof. Alternatively, wash them in warm water with a mild detergent. Rinse thoroughly and dry immediately.
• Handle the blades of the chopping attachment and blending bar with extreme care as they are very sharp.
• Store the appliance and its accessories in a dry place.

7. Troubleshooting

8. Technical Specifications

• Model: HR1351/90
• Power: 250 Watts
• Operating Voltage: 220-240 Volts
• Number of Speeds: 2
• Blade Material: Plastic
• Container Material: Plastic
• Special Feature: Dishwasher Proof (shaft and accessories)
• Color: White
• Item Weight: Approximately 1 kg 510 g
• Included Components: Motor unit, blending bar, chopping attachment, measuring beaker.

9. Warranty and Support

This Philips HR1351/90 Hand Blender comes with a 2-year limited warranty from the date of purchase. This warranty covers manufacturing defects under normal household use.

The warranty does not cover:

• Damage caused by improper use, negligence, or failure to follow instructions.
• Normal wear and tear.
• Damage caused by unauthorized repairs or modifications.

For warranty claims, technical support, or service, please contact your local Philips customer service center or authorized dealer. Please retain your purchase receipt as proof of purchase.