Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Jesco Lighting WS292-CR Cube Series 292 1-Light Wall Sconce. Please read all instructions carefully before beginning installation and retain this manual for future reference.
The Jesco Lighting WS292-CR is a 1-light wall sconce featuring a crystal cube shade and a satin nickel canopy base. It is designed for dry locations, is hardwired, and is ETL listed for safety. This fixture is ADA compliant and includes one G9 120-Volt 40-Watt bulb.
Safety Information
WARNING: Risk of Electric Shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC).
- Consult a qualified electrician if you are unfamiliar with electrical wiring.
- Use only the specified bulb type and wattage (G9 120-Volt 40-Watt).
- Do not install this fixture in wet or damp locations. It is rated for dry locations only.
- Ensure all mounting hardware is securely fastened to a structurally sound surface.
- Do not exceed the maximum wattage specified for the fixture.
- Handle crystal components with care to prevent breakage.
Package Contents
Verify that all components are present before beginning installation:
- (1) Jesco Lighting WS292-CR Wall Sconce Fixture
- (1) G9 120-Volt 40-Watt Halogen Bulb
- Mounting Hardware (screws, wire nuts, mounting plate)
- Instruction Manual (this document)
Image 1: Jesco Lighting WS292-CR Wall Sconce. This image shows the complete wall sconce with its crystal cube shade and satin nickel base, ready for installation.
Setup and Installation
Professional installation by a qualified electrician is recommended for this hardwired fixture.
- Turn off power at the circuit breaker or fuse box to the wall switch controlling the fixture location.
- Carefully unpack the fixture and its components. Keep all parts together.
- Attach the mounting plate to the junction box using the provided screws. Ensure the plate is securely fastened.
- Connect the electrical wires:
- Connect the black wire from the fixture to the black (hot) wire from the junction box using a wire nut.
- Connect the white wire from the fixture to the white (neutral) wire from the junction box using a wire nut.
- Connect the ground wire (bare copper or green) from the fixture to the ground wire from the junction box and to the mounting plate using a ground screw.
- Carefully tuck all wires into the junction box.
- Align the fixture base with the mounting plate and secure it with the provided screws.
- Install the G9 120-Volt 40-Watt bulb into the socket. Do not touch the bulb with bare hands; use a cloth or glove to avoid oil transfer, which can shorten bulb life.
- Attach the crystal cube shade to the fixture according to the manufacturer's design.
- Restore power at the circuit breaker or fuse box and test the fixture.
Image 2: Dimensional Diagram. This image illustrates the height, width, and depth of the wall sconce, which are approximately 4-7/8" H x 4-7/8" W x 3-1/4" Depth.
Operating Instructions
The Jesco Lighting WS292-CR Wall Sconce operates via a standard wall switch connected to its electrical circuit.
- Turning On/Off: Flip the connected wall switch to the "ON" position to illuminate the sconce. Flip it to the "OFF" position to turn off the light.
- Dimming Functionality: This fixture is dimmable. If connected to a compatible dimmer switch (sold separately), you can adjust the light intensity by operating the dimmer control. Ensure your dimmer switch is rated for LED or halogen bulbs as appropriate for the G9 bulb type.
Maintenance
Regular maintenance will help preserve the appearance and functionality of your wall sconce.
- Cleaning:
- Always disconnect power before cleaning.
- Wipe the metal parts with a soft, dry cloth.
- For the crystal shade, use a soft, damp cloth with a mild glass cleaner if necessary, then dry immediately with a clean, lint-free cloth. Avoid abrasive cleaners or solvents.
- Bulb Replacement:
- Turn off power and allow the bulb to cool completely before attempting to replace it.
- Carefully remove the crystal shade.
- Gently pull the old G9 bulb straight out from its socket.
- Insert a new G9 120-Volt 40-Watt halogen bulb. Avoid touching the new bulb with bare hands.
- Reattach the crystal shade.
- Restore power and test.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers. |
|
|
| Bulb burns out quickly. |
|
|
Specifications
| Model Number | WS292-CR |
| Brand | Jesco Lighting |
| Color | Crystal |
| Material | Metal, Crystal |
| Style | Light Wall Sconce / ETL listed |
| Light Fixture Form | Sconce |
| Power Source | Corded Electric (Hardwired) |
| Special Feature | Dimmable |
| Shade Material | Crystal |
| Number of Light Sources | 1 |
| Voltage | 120 Volts |
| Shape | Cube |
| Included Components | Wall Sconce, G9 Bulb |
| Wattage | 40 watts |
| Bulb Base | G9 |
| Mounting Type | Wall Mount |
| Product Dimensions | 4.75 x 4.75 x 5.13 inches (approx. 4-7/8" H x 4-7/8" W x 3-1/4" D) |
| Item Weight | 2.25 pounds |
| Certifications | ETL listed, ADA compliant |
Warranty and Support
For warranty information or technical support regarding your Jesco Lighting WS292-CR Wall Sconce, please contact Jesco Lighting directly through their official website or customer service channels. Retain your proof of purchase for any warranty claims.
Jesco Lighting contact information can typically be found on their packaging or official website: www.jescolighting.com