1. Introduction
This instruction manual provides detailed guidance for the assembly, transformation, and care of your BANDAI Tokumei Sentai Go-busters Tokumei Gattai Dx Busteroh Set. This set includes three Buster Machines: CB-01 DX Go-Buster Ace, GT-02 Gorilla, and RH-03 Rabbit, which can transform individually and combine to form the powerful Busteroh.
Please read these instructions carefully before use to ensure proper handling and to maximize your enjoyment of this product.
2. Product Components
The Tokumei Gattai Dx Busteroh Set includes the following main components:
- CB-01 DX Go-Buster Ace: The red Buster Machine, capable of transforming from vehicle mode to robot mode.
- GT-02 Gorilla: The blue Buster Machine, capable of transforming from vehicle mode to robot mode.
- RH-03 Rabbit: The yellow Buster Machine, capable of transforming from vehicle mode to robot mode.
Ensure all components are present and undamaged upon opening the package.
3. Setup and Assembly (Transformation)
The Dx Busteroh Set features intricate transformations for each individual Buster Machine and their ultimate combination into Busteroh. Follow these steps carefully.
Figure 3.1: Overview of Buster Machine transformations and Busteroh combination.
3.1. CB-01 DX Go-Buster Ace Transformation
Go-Buster Ace transforms from a red vehicle (car) mode to a robot mode. Refer to the top-left section of Figure 3.1 for visual guidance.
- Start with Go-Buster Ace in vehicle mode.
- Extend the front section to form the legs.
- Rotate and position the arms from the side panels.
- Adjust the head and chest plate to complete the robot form.
3.2. GT-02 Gorilla Transformation
GT-02 Gorilla transforms from a blue vehicle (truck) mode to a gorilla-like robot mode. Refer to the bottom-left section of Figure 3.1 for visual guidance.
- Begin with GT-02 Gorilla in vehicle mode.
- Separate the rear section to form the legs.
- Lift and extend the front cabin to reveal the head and torso.
- Position the arms and adjust the body for the robot form.
3.3. RH-03 Rabbit Transformation
RH-03 Rabbit transforms from a yellow vehicle (helicopter) mode to a rabbit-like robot mode. Refer to the middle-left section of Figure 3.1 for visual guidance.
- Start with RH-03 Rabbit in helicopter mode.
- Fold down the rotor blades.
- Extend the landing skids to form legs.
- Adjust the body and head to complete the robot form.
3.4. Tokumei Gattai: Combining into Busteroh
Once all three Buster Machines are in their robot forms, they can combine to create the ultimate Busteroh. Refer to the right section of Figure 3.1 for visual guidance.
- Ensure CB-01 DX Go-Buster Ace is in robot mode. This forms the core torso and head of Busteroh.
- Attach GT-02 Gorilla (in robot mode) to the back of Go-Buster Ace, forming the lower body and legs of Busteroh.
- Attach RH-03 Rabbit (in robot mode) to the arms of Go-Buster Ace, forming the shoulder armor and additional weaponry.
- Secure all connection points firmly until you hear a click, if applicable.
- Adjust the pose of Busteroh as desired.
Note: Always handle the figures with care during transformation to prevent damage to joints or connecting parts.
4. Operating and Transformation Modes
The Dx Busteroh Set offers multiple play configurations:
- Individual Vehicle Modes: Each Buster Machine (CB-01 Ace, GT-02 Gorilla, RH-03 Rabbit) can be displayed and played with in its respective vehicle form.
- Individual Robot Modes: Each Buster Machine can transform into its unique robot form for individual action.
- Combined Busteroh Mode: The three robot forms combine to create the large-scale Busteroh, as detailed in Section 3.4.
Experiment with different poses and configurations to explore the full potential of your Dx Busteroh Set.
5. Maintenance and Care
To ensure the longevity and appearance of your Dx Busteroh Set, follow these care guidelines:
- Cleaning: Wipe the figures gently with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals or abrasive cleaners.
- Storage: Store the figures in a cool, dry place away from direct sunlight and extreme temperatures, which can cause discoloration or material degradation.
- Handling: Avoid excessive force when transforming or posing the figures. Plastic parts can break if stressed beyond their design limits.
- Small Parts: This product may contain small parts. Keep away from young children to prevent choking hazards.
6. Troubleshooting
If you encounter any issues with your Dx Busteroh Set, consider the following:
- Parts not fitting during transformation: Ensure you are following the transformation steps precisely. Sometimes, a slight adjustment or rotation is needed to align parts correctly. Do not force connections.
- Loose joints: Over time, joints may become slightly loose. This is normal with repeated use. If a joint is excessively loose, check for any obstructions or misaligned parts.
- Missing parts: If you believe a part is missing from a new set, contact the retailer or manufacturer's customer support immediately.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | BANDAI |
| Model Name | DX Busteroh |
| Toy Figure Type | Action Figure |
| Characters | Go-Buster Ace, Gorilla, Rabbit |
| Material Type | Plastic |
| Assembly Required | No (Transformation required) |
| Additional Features | Transforming Combination |
| Recommended Uses | Imaginative play, Role-playing, Combining figures for transformation |
| Number of Pieces | 1 (Set includes 3 main figures) |
8. Warranty and Support
BANDAI products are manufactured with high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official BANDAI website.
If you require technical assistance, have questions about product functionality, or need to report a defect, please contact BANDAI customer support through their official channels. Contact information can typically be found on the product packaging or the official BANDAI website.
