Velvac 713802 Heated and Remote Control Mirror

1. Introduction

Thank you for choosing the Velvac 713802 Heated and Remote Control Mirror. This product is designed to provide enhanced visibility and convenience for your vehicle, particularly on the passenger side. Featuring a built-in heating element for clear visibility in cold weather and compatibility with a separate remote control for effortless adjustment, this mirror is constructed for durability and reliable performance.

2. Safety Information

• Always ensure the vehicle is turned off and the battery is disconnected before beginning any installation or maintenance procedures involving electrical components.
• Wear appropriate personal protective equipment, such as safety glasses and gloves, during installation.
• Exercise caution when handling glass components to prevent injury.
• Ensure all wiring connections are secure and properly insulated to prevent electrical shorts or hazards.
• Legal Disclaimer: Some components or parts may exhibit slight imperfections or flaws that are normal or acceptable part standards within the RV industry. These characteristics are not considered a defect in workmanship or material and are not eligible to be returned. Electrical parts may not be returned.

3. Setup and Installation

The Velvac 713802 mirror is designed for straightforward installation as a door-mount unit on the passenger side of most compatible vehicles. The package includes the mirror housing and necessary components for mounting.

1. Preparation: Park your vehicle on a level surface and engage the parking brake. Disconnect the vehicle's battery to prevent electrical hazards.
2. Remove Old Mirror (if applicable): Carefully remove the existing mirror assembly. This typically involves unscrewing mounting bolts from inside the door panel and disconnecting any electrical connectors.
3. Mount New Mirror: Position the Velvac 713802 mirror assembly onto the door mount. Secure it using the provided mounting hardware. Ensure the mirror is firmly attached and does not wobble.
4. Connect Wiring: Connect the electrical wiring for the heated function and remote adjustment. Refer to your vehicle's wiring diagram for correct connections. Some older vehicle models may require minor wiring modifications or adapter changes, as noted by some users. Ensure all connections are tight and insulated.
5. Test Functionality: Reconnect the vehicle's battery. Test the heated function and the remote adjustment (if a remote control is installed) to ensure proper operation before driving.

Figure 1: Front view of the Velvac 713802 mirror, showing the main mirror and convex blind spot mirror.

Figure 2: Rear view of the Velvac 713802 mirror, illustrating the mounting plate and electrical wiring harness.

Figure 3: Small black caps, typically used to cover mounting holes for a clean finish.

4. Operating Instructions

• Heated Function: The mirror features a built-in heating element. This function is typically activated via a switch inside your vehicle, often integrated with the rear defroster or a dedicated mirror heat button. Activate it in cold or foggy conditions to clear frost, ice, or condensation from the mirror surface.
• Remote Control Adjustment: The Velvac 713802 mirror is compatible with a separate remote control system (not included). If you have an existing or newly installed remote control system, use its controls to adjust the mirror's position (up, down, left, right) for optimal rear visibility.
• Manual Adjustment: The mirror glass can also be adjusted manually by gently pressing on the edges of the mirror surface to achieve the desired angle.

5. Maintenance

• Cleaning: Clean the mirror glass and housing regularly with a mild automotive glass cleaner and a soft cloth. Avoid abrasive cleaners or harsh chemicals that could damage the mirror surface or plastic housing.
• Inspection: Periodically inspect the mirror for any signs of damage, loose connections, or wear. Ensure the mirror remains securely mounted to the vehicle.
• Wiring: Check the wiring for any fraying, cuts, or corrosion. Address any issues promptly to maintain proper functionality of the heated and remote adjustment features.

6. Troubleshooting

• Mirror Not Heating: Check the fuse for the mirror heating circuit in your vehicle's fuse box. Ensure the heating element's wiring connections are secure and free from corrosion. Verify that the activation switch is functioning correctly.
• Remote Adjustment Not Working: If using a separate remote control, ensure its battery is charged or replaced. Check the wiring connections for the remote adjustment motor. Verify that the remote control unit is properly paired with the mirror's adjustment mechanism.
• Mirror Vibrates or is Loose: Tighten all mounting bolts and screws. Inspect the mirror housing for any cracks or damage that might affect its stability.
• Wiring Compatibility Issues: If experiencing issues after installation, particularly with older vehicles, verify that the wiring harness connections match your vehicle's specifications. Adapters or minor rewiring may be necessary in some cases.

7. Specifications

• Brand: Velvac
• Model Number: 713802
• Auto Part Position: Right Outer (Passenger Side)
• Item Dimensions (L x W x H): 9.05 x 5.64 x 22.25 inches
• Color: Black
• Mounting Type: Door Mount
• Included Components: Mirror comes with housing
• Item Weight: 8.5 Pounds (approx. 8.45 pounds)
• Fit Type: Universal Fit
• Lens Curvature Description: Convex, Flat
• Mirror Adjustment: Manual Remote (remote-controlled adjustment)
• Heated: Yes

8. Warranty and Support

For specific warranty information and customer support, please refer to the documentation provided with your purchase or contact Velvac directly. As per the manufacturer's legal disclaimer, please note that some minor imperfections are considered normal within RV industry standards and are not eligible for return. Additionally, electrical parts are generally not returnable.

For further assistance or technical inquiries, please visit the official Velvac website or contact their customer service department.