Product Overview
The Alpine Corporation 60-inch 3-Tier Rainforest Rock River Water Fountain with LED Lights (Model WIN558) is designed to enhance your outdoor living space with the tranquil sounds and visual appeal of flowing water. Crafted from durable polystone and fiberglass, this hand-painted fountain features a realistic rock and wood river design, complete with three tiers and integrated LED lighting for day and night ambiance. It is suitable for gardens, patios, decks, porches, and yards.

Image: The Alpine Corporation 60-inch 3-Tier Rainforest Rock River Water Fountain, showcasing its multi-tiered design and integrated LED lights.
Setup Instructions
- Unpacking: Carefully remove all components from the packaging. Inspect the fountain for any damage. Retain packaging materials for future storage or transport.
- Placement: Select a level surface for the fountain. Ensure it is near a suitable outdoor electrical outlet. The fountain measures 60"L x 33"W x 28"H, so allow adequate space.
- Assembly: This fountain typically comes largely pre-assembled. Connect the pump hose to the water outlet located within the fountain structure. Ensure all connections are secure.
- Filling: Fill the lowest basin of the fountain with clean water. Ensure the pump is fully submerged. Do not overfill; leave some space to prevent splashing.
- Power Connection: Plug the power cord into a ground fault circuit interrupter (GFCI) protected outdoor electrical outlet.

Image: Diagram illustrating the dimensions of the water fountain (60"L x 33"W x 28"H) for proper placement planning.
Operating Instructions
- Initial Start-up: Once plugged in, the pump will begin circulating water, and the LED lights will illuminate. Allow a few minutes for water to fully circulate and for air to escape the pump.
- Water Level: Regularly check the water level in the lowest basin. Due to evaporation and splashing, water levels will decrease over time. Refill as needed to ensure the pump remains fully submerged. Operating the pump dry can cause damage.
- Adjusting Flow: Some pumps may have an adjustable flow rate switch. If available, adjust to your preferred water flow.
- LED Lights: The integrated LED lights operate automatically when the fountain is powered on, providing illumination to the water flow.

Image: A close-up view of water cascading over the tiers of the fountain, highlighting the natural rock and wood texture and the illuminated water pools.
Maintenance
- Cleaning: To prevent algae and mineral buildup, clean the fountain regularly. Drain the water, wipe down surfaces with a soft cloth and mild soap, and rinse thoroughly. Avoid abrasive cleaners.
- Pump Care: Periodically clean the pump to ensure optimal performance. Disconnect power, remove the pump, and clean any debris from the impeller and intake screen.
- Water Quality: Use distilled water to minimize mineral deposits, especially in hard water areas. Water treatment products designed for fountains can also help maintain water clarity.
- Winterization: In freezing climates, drain all water from the fountain and pump before the first frost. Clean the fountain and store it in a dry, protected area to prevent damage from ice expansion. The pump should also be stored indoors.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fountain not running | No power; pump clogged; water level too low. | Check power connection and GFCI. Clean pump impeller and screen. Add water to submerge pump. |
| Water flow is weak | Pump clogged; water level too low; kinked hose. | Clean pump. Add water. Straighten hose. |
| LED lights not working | Loose connection; damaged LED unit. | Check all light connections. If damaged, contact support. |
| Excessive splashing | Water level too high; pump flow too strong. | Reduce water level slightly. Adjust pump flow if possible. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | WIN558 |
| Brand | Alpine Corporation |
| Dimensions (L x W x H) | 60"L x 33"W x 28"H |
| Item Weight | 93.9 Pounds |
| Material | Polystone with Fiberglass |
| Color | Gray/Beige |
| Power Source | Corded Electric |
| Special Feature | Corded, LED Lights |
| UPC | 821559421364 |
Warranty and Support
This Alpine Corporation water fountain comes with a 1-year limited manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims, technical assistance, or replacement parts, please contact Alpine Corporation customer support directly. Keep your proof of purchase for warranty validation.




