We R Memory Keepers 60000104

We R Memory Keepers Explosion Card Punch Board

Instruction Manual

Introduction

Welcome to the instruction manual for your We R Memory Keepers Explosion Card Punch Board. This innovative craft tool is designed to help you create unique and exciting explosion cards that burst open with confetti or small surprises when opened. This manual provides essential information on setting up, operating, maintaining, and troubleshooting your punch board to ensure a smooth and enjoyable crafting experience.

Product Overview

The We R Memory Keepers Explosion Card Punch Board simplifies the process of creating intricate explosion cards. It includes all the necessary components to get started with your card-making projects.

Included Components:

  • 1 Explosion Card Punch Board
  • 1 Scoring Tool
  • A set of Rubber Bands
  • A set of "Hold Here" & "Pull Here" Stamps
We R Memory Keepers Explosion Card Punch Board with various finished explosion cards and crafting supplies.

Figure 1: The Explosion Card Punch Board with examples of completed explosion cards and envelopes.

Close-up of the Explosion Card Punch Board, scoring tool, rubber bands, and 'Pull Here' and 'Hold Here' stamps.

Figure 2: All components included with the Explosion Card Punch Board.

Setup

The Explosion Card Punch Board requires minimal setup. Ensure you have a clean, flat, and stable work surface before beginning your project.

Initial Preparation:

  1. Unpack all components from the packaging.
  2. Familiarize yourself with the punch board's markings for creating boxes, envelopes, trays, and confetti.
  3. Gather your desired cardstock or paper. For best results, use sturdy cardstock (approximately 190 gsm or higher) to prevent tearing, especially where rubber bands will be attached.

Operating Instructions

Follow these steps to create your explosion cards using the punch board.

Creating an Explosion Card:

  1. Select Paper: Choose your desired cardstock. Remember that sturdier paper yields better results for the explosion mechanism.
  2. Punch and Score: Place your paper on the punch board according to the guides for the desired card component (box, envelope, tray). Use the included scoring tool to create crisp fold lines and the punch to create necessary cuts and notches.
  3. Assemble the Box: Fold along all scored lines to form the box shape. Secure the sides using adhesive if necessary.
  4. Prepare the Explosion Mechanism: Attach the provided rubber bands to the designated points on the card's inner structure. These rubber bands create the tension needed for the