Zoom MS50G
Zoom MS-50G MultiStomp Guitar Effects Pedal
Instruction Manual
Product Overview
The Zoom MS-50G MultiStomp Guitar Pedal combines the power of a multi-effects pedal with the flexibility of an amp modeler in a single stompbox design. It features 55 classic stompbox effects and amp models, an easy-to-use interface, an auto-chromatic tuner, and versatile power options, providing extensive sonic possibilities for guitar players.
Setup
1. Package Contents
- Zoom MS-50G MultiStomp Guitar Effects Pedal
- 2 x AA Batteries
- Instruction Manual (this document)
2. Powering the Device
The MS-50G can be powered in two ways:
- AA Batteries: Insert two standard AA batteries into the battery compartment. The pedal provides up to seven hours of continuous mono input use and up to five hours of continuous operation with stereo inputs.
- AC Adapter: For extended use, connect an optional AC adapter (sold separately) to the DC 9V 500mA input jack.
- USB Bus Power: The unit can also be powered via USB connection to a computer.
Figure 1: Rear view of the MS-50G showing power and USB connections.
3. Connecting Your Guitar and Amplifier
Connect your guitar to the IN input jack on the right side of the pedal. Connect the L (MONO) output jack to your amplifier or audio interface. For stereo output, connect both the L and R output jacks.
Figure 2: Side view of the MS-50G illustrating input and output jacks.
Operating the MS-50G
1. Interface Overview
The MS-50G features a large LCD display, a footswitch, and three parameter knobs/cursor keys for intuitive navigation and control.
Figure 3: Front view of the MS-50G with LCD and controls.
- LCD Display: Shows effect parameters, patch names, and tuner information.
- Footswitch: Used to toggle effects on/off, switch patches, and activate the tuner.
- Parameter Knobs/Cursor Keys: Navigate menus, adjust effect parameters, and select options.
2. Effect Types and Chains
The pedal offers 55 diverse effect types, including 47 stompbox effects and 8 amp models. You can use up to six effects simultaneously and arrange them in any desired order to create complex and unique tones.
The all-new ZFX-IV DSP effects processor ensures high clarity and realistic sound reproduction, utilizing 32-bit floating-point processing.
3. Patch Management
The MS-50G allows you to create and store up to 50 original patches. 30 preprogrammed patches are included to get you started. You can program the order in which patches are recalled, allowing for seamless transitions during live performances.
4. Tuner Function
An integrated auto-chromatic tuner provides smooth, real-time response. To activate the tuner, hold down the footswitch. You can choose between MUTE mode for silent tuning or BYPASS mode to tune with all effects bypassed.
5. Tap Tempo
The tap tempo function allows you to set the tempo for time-based effects by tapping the footswitch.
6. Firmware Updates and Extra Effects
To ensure optimal performance and access to additional effects, it is recommended to regularly check the official Zoom website for the latest firmware updates. Some "extra" effects may require downloading a dedicated effects manager application and connecting the pedal to your computer via USB. Follow the instructions provided on the Zoom website for these procedures.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the pedal's surface. Avoid abrasive cleaners or solvents.
- Battery Replacement: Replace AA batteries when the low battery indicator appears or when the pedal's performance degrades. Ensure correct polarity when inserting new batteries.
- Storage: Store the pedal in a cool, dry place away from direct sunlight and extreme temperatures.
- Firmware: Keep the firmware updated to benefit from performance improvements and new features.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound or low output. | Incorrect cable connections, low battery, pedal bypassed, volume settings too low. | Check all cable connections. Replace batteries or use AC adapter. Ensure pedal is engaged. Adjust volume/level parameters on the pedal and amplifier. |
| Distortion/Overdrive effects are too loud or cause feedback. | Initial preset levels for OD/Distortion effects may be set too high for some amplifiers. | When using OD/Distortion effects, immediately reduce the output level parameter within the effect settings. Save these adjusted levels to your custom patches. |
| Pedal not recognized by computer for firmware update. | Incorrect USB cable, driver issues, or software not running. | Ensure you are using a data-capable USB cable. Reinstall necessary drivers. Verify the firmware update software or effects manager is running correctly on your computer. |
If you encounter issues not listed here, please refer to the support section for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Model Number | MS50G |
| Dimensions (L x W x H) | 6.29 x 3.77 x 3.07 inches (approx. 16 x 9.6 x 7.8 cm) |
| Item Weight | 1 pound (approx. 0.45 kg) |
| Effect Types | 55 (47 stompbox effects, 8 amp models) |
| Simultaneous Effects | Up to 6 |
| User Patches | 50 (30 preprogrammed) |
| Tuner | Integrated auto-chromatic tuner |
| Power Options | 2 x AA batteries (included), AC adapter (sold separately), USB bus power |
| Battery Life | Up to 7 hours (mono input), 5 hours (stereo input) |
| Hardware Interface | USB |
| Signal Format | Analog |
Figure 4: MS-50G dimensions for size reference.
Warranty and Support
Warranty Information
This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official Zoom website for detailed warranty terms and conditions specific to your region.
Customer Support
For technical assistance, troubleshooting, or product inquiries, please visit the official Zoom support website or contact their customer service department. Contact information and support resources can typically be found on the manufacturer's website.
Online Resources: Official Zoom MS-50G Product Page
Related documentsMS50G
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.