Replacement Remote Control User Manual

1. Product Overview

This document provides instructions for the Redi-Remote replacement remote control, specifically designed for various SANSUI television models including HDLCD1955, HDLCD1912, 076E0PV021, HDLCD1912G, HDLCD1955A, and MLT1931. This remote is a custom-built replacement and is not an original SANSUI remote control. It is engineered to perform all functions of the original remote for the specified SANSUI units without requiring any programming.

Figure 1: Redi-Remote Replacement Remote Control. This image displays the full remote control, including the main button layout and the lower section with additional buttons, which is revealed by sliding down a cover.

2. Setup

2.1 Battery Installation

The remote control requires four (4) AAA batteries for operation. Follow these steps to install the batteries:

1. Locate the battery compartment cover on the back of the remote control.
2. Slide the cover downwards or press the latch (if present) to open the compartment.
3. Insert four AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
4. Replace the battery compartment cover by sliding it back into place until it clicks securely.

Note: This Redi-Remote is designed for immediate use and does not require any programming or code setup. Once batteries are installed, it should function directly with compatible SANSUI television models.

3. Operating Instructions

This section details the functions of the buttons on your replacement remote control.

3.1 Main Button Functions

• PWR (Power): Turns the television on or off.
• TV/VIDEO: Switches between TV and video input modes.
• SLEEP: Activates the sleep timer function.
• DISP (Display): Displays on-screen information such as channel number or time.
• VOL + / VOL - (Volume): Increases or decreases the volume level.
• MUTE: Mutes or unmutes the television audio.
• CH + / CH - (Channel): Changes the television channel up or down.
• MENU: Accesses the television's main menu.
• RECALL: Switches between the current and previously viewed channel.
• Number Buttons (0-9, 100): Directly enters channel numbers. The "100" button may be used for three-digit channel entry or specific functions depending on the TV model.
• ENT (Enter): Confirms selections or enters channel numbers.

3.2 Hidden Button Functions (Slide Down Cover)

The lower half of the remote control features additional buttons concealed by a sliding cover. To access these buttons, gently slide the cover downwards. These buttons provide advanced control options:

• RESET: Resets certain television settings.
• EXIT: Exits from menus or on-screen displays.
• INP SEL (Input Select): Cycles through available input sources (e.g., HDMI, AV).
• CCD (Closed Caption Decoder): Toggles closed captions on or off.
• S-SIZE (Screen Size): Adjusts the screen aspect ratio or size.
• AUDIO: Controls audio settings or modes.
• Additional unlabeled buttons: The grid of blue buttons below the labeled ones are typically used for specific functions within menus or for advanced features depending on the SANSUI TV model. Refer to your television's original manual for their specific uses.

4. Maintenance

4.1 Cleaning the Remote

To ensure optimal performance and longevity, keep your remote control clean. Use a soft, dry cloth to wipe the surface. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals or abrasive materials, as these can damage the remote's finish or internal components.

4.2 Battery Replacement

Replace the batteries when the remote control's responsiveness decreases or it stops functioning. Always replace all four AAA batteries at the same time with new ones. Do not mix old and new batteries, or different types of batteries, as this can lead to leakage or improper operation. Dispose of used batteries according to local regulations.

5. Troubleshooting

• Remote not responding:
  • Check if the batteries are installed correctly with the correct polarity.
  • Replace old batteries with new ones.
  • Ensure there are no obstructions between the remote control and the television's infrared sensor.
  • Confirm that the remote is pointed directly at the television.
• Certain buttons not working:
  • Clean the remote control surface, especially around the non-functioning buttons, to remove any dirt or debris that might be preventing proper contact.
  • If the issue persists, the button mechanism might be faulty.
• Remote range is poor:
  • Replace the batteries. Low battery power can reduce the remote's effective range.
  • Ensure no strong light sources (like direct sunlight or bright fluorescent lights) are interfering with the TV's IR sensor.

If troubleshooting steps do not resolve the issue, please refer to the Support section for further assistance.

6. Specifications

7. Warranty and Support

This Redi-Remote replacement remote control is manufactured to high standards. As a replacement product, specific warranty details may vary. For any concerns regarding the remote control after purchase, or for technical support, it is recommended to contact the seller directly. The seller, RemotesPro, can be reached via their contact information provided at the point of purchase or through the platform where the item was acquired.

For general information about Redi-Remote products, you may visit the Redi-Remote brand page on Amazon.