Kenwood Kmix KW713779 Metal Stand Mixer User Manual

Important Safety Instructions

When using electrical appliances, basic safety precautions should always be followed, including the following:

• Read all instructions before operating the appliance.
• Do not immerse the motor unit in water or other liquids.
• Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
• Avoid contact with moving parts.
• The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
• Do not let cord hang over edge of table or counter.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
• Close supervision is necessary when any appliance is used by or near children.

Components Overview

The Kenwood Kmix Stand Mixer comes with several key components designed for various mixing tasks. Familiarize yourself with each part before operation.

Image: The dough blade attachment, a key component for kneading dough. This attachment is made of stainless steel and is designed for heavy-duty mixing.

Key components typically include:

• Motor Unit: The main body housing the motor and controls.
• Mixing Bowl: A stainless steel bowl for ingredients.
• Dough Blade: (As shown above) Used for kneading bread dough and other heavy mixtures.
• Whisk: For whipping cream, egg whites, and light batters.
• Beater: For general mixing, creaming butter and sugar, and making cakes.
• Splashguard: Prevents ingredients from splashing out of the bowl during operation.

Setup

Before first use, ensure all packaging materials are removed and the appliance is clean.

1. Unpack: Carefully remove the mixer and all accessories from the packaging.
2. Clean: Wash the mixing bowl, dough blade, whisk, and beater in warm, soapy water. Rinse thoroughly and dry completely. Wipe the motor unit with a damp cloth.
3. Position: Place the mixer on a stable, flat, and dry surface. Ensure there is adequate space around the mixer for ventilation and operation.
4. Attach Bowl: Place the mixing bowl onto the base and twist clockwise until it locks securely into place.
5. Attach Accessory: Select the desired attachment (dough blade, whisk, or beater) and insert it into the attachment hub. Push upwards and twist until it clicks into place.
6. Lower Head: If the mixer head is tilted, lower it into the operating position.
7. Connect Power: Plug the power cord into a suitable electrical outlet (220 Volts).

Operating Instructions

Follow these steps for safe and effective operation of your Kenwood Kmix Stand Mixer.

1. Add Ingredients: Place all necessary ingredients into the mixing bowl.
2. Select Speed: Turn the speed control dial to the desired setting. Start with a low speed to incorporate ingredients, then gradually increase as needed.
3. Monitor Mixing: Observe the mixing process. Use the splashguard to prevent mess.
4. Stop Operation: When mixing is complete, turn the speed control dial to the "OFF" position.
5. Remove Attachment: Unplug the mixer from the power outlet. Tilt the mixer head upwards (if applicable) and remove the attachment by twisting and pulling downwards.
6. Remove Bowl: Twist the mixing bowl counter-clockwise to unlock and remove it from the base.

Tips for Best Results:

• Always use fresh ingredients.
• For optimal whipping, ensure egg whites and cream are cold.
• Do not overload the mixer beyond its recommended capacity.

Maintenance and Cleaning

Regular cleaning and maintenance will ensure the longevity and optimal performance of your stand mixer.

• Always Unplug: Before cleaning, always ensure the mixer is unplugged from the power outlet.
• Attachments and Bowl: The mixing bowl, dough blade, whisk, and beater are dishwasher safe. Alternatively, wash them by hand in warm, soapy water, rinse, and dry thoroughly.
• Motor Unit: Wipe the exterior of the motor unit with a damp cloth. Do not use abrasive cleaners or immerse the motor unit in water.
• Storage: Store the mixer and its accessories in a clean, dry place when not in use.

Troubleshooting

Refer to the table below for common issues and their potential solutions.

If the problem persists after attempting these solutions, please contact customer support.

Specifications

Warranty and Support

This Kenwood Kmix Stand Mixer (Model KW713779) comes with a Limited Warranty. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration of coverage.

The warranty typically covers defects in materials and workmanship under normal household use. It does not cover damage resulting from misuse, accident, alteration, neglect, or commercial use.

For technical support, service, or warranty claims, please visit the official Kenwood website or contact their customer service department. Keep your proof of purchase for warranty validation.

You can find more information and contact details on the Kenwood Store on Amazon.