TSK HD-002 Eyeglass Loupe User Manual

Introduction

This manual provides detailed instructions for the proper use, setup, operation, and maintenance of your TSK HD-002 Eyeglass Loupe.

The HD-002 is designed to provide enhanced magnification for various tasks, featuring multiple interchangeable lenses and integrated LED illumination. It comes equipped with 2 LED lights for excellent workability and five types of interchangeable lenses (1.0X, 1.5X, 2.0X, 2.5X, 3.5X) to suit different magnification needs. The LED light's angle can be adjusted for optimal illumination.

Product Components

Familiarize yourself with the main components of your TSK HD-002 Eyeglass Loupe:

• Eyeglass frame with integrated LED lights
• Interchangeable magnification lenses (1.0X, 1.5X, 2.0X, 2.5X, 3.5X)
• Battery compartment (for LR44 batteries)
• Lens slot
• LED light adjustment mechanism

Figure 1: Overview of the TSK HD-002 Eyeglass Loupe, showing the main frame and an attached lens.

Figure 2: Side view illustrating the adjustable LED lights and the battery compartment on the frame.

Setup

1. Battery Installation

The TSK HD-002 requires 3 LR44 batteries (included). Follow these steps to install or replace batteries:

1. Locate the battery compartment on the side of the eyeglass frame.
2. Gently slide open the battery cover.
3. Insert 3 LR44 batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Close the battery cover securely.

2. Lens Attachment

Select the desired magnification lens (1.0X, 1.5X, 2.0X, 2.5X, or 3.5X) based on your task. To attach a lens:

1. Hold the eyeglass frame firmly.
2. Align the chosen lens with the lens slot on the frame.
3. Gently slide the lens into the slot until it clicks into place.

Figure 3: Illustration of the lens attachment mechanism, showing a lens being inserted into the frame.

Operating Instructions

1. Wearing the Loupe

Place the eyeglass loupe on your head like regular eyeglasses. Ensure it sits comfortably and securely.

2. Adjusting LED Lights

The HD-002 features two adjustable LED lights. To turn them on/off and adjust their angle:

• Locate the power switch for the LEDs on the frame.
• Toggle the switch to turn the lights on or off.
• Gently pivot the LED light modules up or down to direct the illumination onto your working area.

Figure 4: A user demonstrating the use of the eyeglass loupe, highlighting the illuminated field of view.

3. Changing Magnification Lenses

To change the magnification, gently slide out the currently installed lens from the slot and replace it with another lens of your desired magnification (1.0X, 1.5X, 2.0X, 2.5X, or 3.5X).

Maintenance

Cleaning

• Use a soft, lint-free cloth (e.g., microfiber cloth) to clean the lenses.
• For stubborn smudges, a small amount of lens cleaning solution can be applied to the cloth, not directly to the lens.
• Wipe the frame with a damp cloth if necessary, avoiding direct contact with electronic components.
• Do not use abrasive cleaners or solvents.

Storage

When not in use, store the eyeglass loupe and its lenses in a clean, dry place, preferably in a protective case to prevent scratches and dust accumulation.

Battery Replacement

Replace the LR44 batteries when the LED lights dim or stop functioning. Refer to the "Battery Installation" section under Setup for instructions.

Troubleshooting

Specifications

Warranty and Support

Information regarding product warranty and customer support was not available in the provided data. For warranty details, technical support, or service inquiries, please refer to the official TSK website or contact your retailer.

Manufacturer: TSK (ティ・エス・ケイ)