Introduction
The 3-IN-ONE Multi-Purpose Oil with Telescoping Spout is a versatile lubricant designed for a wide range of applications. Since 1894, 3-IN-ONE oil has been trusted for its ability to lubricate, penetrate rust, and clean various mechanisms and surfaces. This particular product features a unique telescoping spout for precise application in hard-to-reach areas.
Product Features
- Multi-Purpose Formula: Lubricates moving parts, penetrates and loosens rusted components, and cleans surfaces.
- Telescoping Marksman Spout: Extends more than 6 inches to provide pinpoint accuracy for applying oil in tight or difficult-to-access spaces.
- Long-Lasting Protection: Provides durable lubrication and corrosion prevention.
- Convenient Bottle Size: 4 fluid ounces (118 mL) for easy handling and storage.
Image: 3-IN-ONE Multi-Purpose Oil with Telescoping Marksman Spout. The label highlights its multi-purpose use (lubricates, penetrates rust, cleans) and the spout's ability to extend over 6 inches for hard-to-reach spaces.
Usage Instructions
- Preparation: Ensure the surface or mechanism to be treated is clean and free from excessive dirt or debris.
- Extend Spout: Gently pull the red telescoping spout upwards until it reaches the desired length. The spout can extend over 6 inches for precision.
- Apply Oil: Aim the tip of the spout directly at the area requiring lubrication, rust penetration, or cleaning. Squeeze the bottle gently to dispense a small amount of oil. For optimal results, apply only a few drops as needed.
- Retract Spout: After use, push the telescoping spout back down into the cap until it is fully retracted. This helps prevent leakage and keeps the spout clean.
- Wipe Excess: If any excess oil is present, wipe it away with a clean cloth to prevent accumulation and potential mess.
Note: The telescoping spout is designed for precise application. Avoid over-squeezing the bottle to prevent excessive oil discharge, which can lead to mess and waste.
Maintenance and Storage
- Storage: Store the bottle upright in a cool, dry place away from direct sunlight and heat sources.
- Cap Security: Always ensure the cap is tightly closed and the telescoping spout is fully retracted after each use to prevent leaks and contamination.
- Spout Cleaning: If the spout becomes clogged, gently clean the tip with a thin wire or needle.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Oil leaks from spout/cap when stored or used. | Spout not fully retracted; cap not tightened; bottle stored horizontally; temperature changes causing expansion. | Ensure spout is fully retracted and cap is tightly secured. Store bottle upright. Avoid storing in areas with significant temperature fluctuations. |
| Difficulty dispensing oil or inconsistent flow. | Spout tip is clogged; air bubble in the spout. | Gently clear the spout tip with a thin wire. Tap the bottle lightly to dislodge any air bubbles. |
| Excessive oil dispensed. | Bottle squeezed too hard. | Apply less pressure when squeezing the bottle. The telescoping spout allows for precise, small drops. |
Specifications
- Product Dimensions: 8.2 x 7.9 x 4.5 inches (packaging dimensions, actual bottle is smaller)
- Item Model Number: 100703
- Liquid Volume: 4 Fluid Ounces (118 mL)
- Item Weight: 4 Ounces
- Item Form: Oil
- Manufacturer: The WD-40 Company
- Brand: 3-IN-ONE
Safety Information
Always read and follow the instructions and warnings on the product label before use. Keep out of reach of children and pets. Use in a well-ventilated area. Avoid prolonged skin contact. In case of eye contact, flush thoroughly with water. If swallowed, do not induce vomiting; call a physician immediately. Dispose of contents/container in accordance with local regulations.
Warranty and Support
For specific warranty information or product support, please refer to the manufacturer's official website or contact The WD-40 Company directly. Contact details can typically be found on the product packaging or their corporate website.
