1. Introduction
Thank you for choosing the Blaupunkt GTt 1200 DE 12-Inch Subwoofer Tube. This manual provides essential information for the proper installation, operation, and maintenance of your new car audio component. Please read this manual thoroughly before attempting to install or use the product to ensure optimal performance and safety.
The Blaupunkt GTt 1200 DE is a 12-inch preloaded ported subwoofer tube designed to deliver powerful bass in your vehicle. It features a spun paper cone, high current binding posts, and a durable high-density carpet finish.
2. Safety Information
Always observe the following safety precautions to prevent injury or damage to the product and your vehicle:
- Professional Installation Recommended: Installation of car audio equipment can be complex. If you are unsure about any part of the installation process, consult a qualified professional installer.
- Disconnect Battery: Before starting any electrical work, disconnect the vehicle's negative battery terminal to prevent electrical shorts and damage.
- Proper Wiring: Ensure all wiring is correctly connected, insulated, and secured to prevent shorts, overheating, and potential fire hazards. Use appropriate gauge wires for power and ground connections.
- Mounting Security: Securely mount the subwoofer tube to prevent it from shifting during vehicle movement, which could cause injury or damage.
- Ventilation: Ensure adequate ventilation around the subwoofer tube to prevent overheating, especially during prolonged use at high volumes.
- Volume Levels: Prolonged exposure to high volume levels can cause hearing damage. Adjust volume to a safe and comfortable level.
- Avoid Moisture: Do not expose the subwoofer tube to water or excessive moisture. This product is not waterproof.
3. Package Contents
Upon opening the package, please verify that all items are present and in good condition:
- Blaupunkt GTt 1200 DE 12-Inch Subwoofer Tube
- Mounting Straps (typically included for securing the tube)
- User Manual (this document)
If any items are missing or damaged, please contact your retailer immediately.
4. Product Overview
The Blaupunkt GTt 1200 DE is a robust, preloaded subwoofer designed for easy integration into your car audio system. Its tube design is optimized for bass reproduction, providing deep and impactful low frequencies.

5. Setup and Installation
Proper installation is crucial for the performance and longevity of your subwoofer tube. This section outlines general installation steps. Specific vehicle requirements may vary.
5.1. Choosing a Mounting Location
The subwoofer tube is typically installed in the trunk or cargo area of a vehicle. Choose a location that:
- Allows for secure mounting to prevent movement.
- Does not obstruct access to essential vehicle components or safety equipment.
- Provides adequate space for the tube's dimensions (51 x 35 x 35 cm).
5.2. Wiring Connections
The GTt 1200 DE is a wired subwoofer and requires connection to an external amplifier (not included). Follow these general steps:
- Power Wiring: Connect the amplifier's power input to the vehicle's battery using an appropriate gauge power cable, protected by an inline fuse near the battery.
- Ground Wiring: Connect the amplifier's ground terminal to a clean, unpainted metal surface on the vehicle chassis.
- Remote Turn-On: Connect the amplifier's remote turn-on terminal to the remote output of your head unit or a switched 12V source.
- RCA Signal Cables: Connect the RCA output from your head unit (or a line output converter if your head unit lacks RCA outputs) to the RCA input of your amplifier.
- Speaker Wire to Subwoofer: Connect the amplifier's speaker output terminals to the high current binding posts on the subwoofer tube using appropriate gauge speaker wire. Ensure correct polarity (+ to + and - to -).
Caution: Incorrect wiring can damage your equipment or vehicle. If unsure, seek professional assistance.
5.3. Securing the Subwoofer Tube
Use the provided mounting straps or other suitable hardware to firmly secure the subwoofer tube in its chosen location. This prevents it from moving during acceleration, braking, or turns.
6. Operation
Once installed and wired correctly, the subwoofer tube will operate in conjunction with your amplifier and head unit.
- Initial Power-Up: After all connections are made and checked, reconnect the vehicle's negative battery terminal. Turn on your head unit.
- Amplifier Settings: Adjust the gain, crossover frequency (low-pass filter), and bass boost settings on your amplifier according to your preferences and the subwoofer's specifications. Start with low settings and gradually increase.
- Head Unit Settings: If your head unit has subwoofer level control or crossover settings, adjust them to blend the subwoofer's output seamlessly with your main speakers.
- Listening Test: Play various types of music to evaluate the sound. Adjust settings until the bass is clear, impactful, and balanced with the rest of your audio system.
Note: Avoid operating the subwoofer at excessively high volumes for extended periods, as this can lead to overheating and damage.
7. Maintenance
The Blaupunkt GTt 1200 DE requires minimal maintenance to ensure long-term performance:
- Cleaning: Use a soft, dry cloth to wipe down the exterior of the tube. For the carpeted surface, a vacuum cleaner with a brush attachment can be used to remove dust and debris.
- Avoid Liquids: Do not use liquid cleaners or solvents directly on the subwoofer tube.
- Inspect Connections: Periodically check all wiring connections to ensure they are secure and free from corrosion.
- Environmental Protection: Keep the subwoofer tube away from extreme temperatures, direct sunlight, and excessive moisture.
8. Troubleshooting
If you encounter issues with your subwoofer tube, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Sound from Subwoofer |
|
|
| Distorted Sound |
|
|
| Weak Bass Output |
|
|
If these steps do not resolve the issue, please contact Blaupunkt customer support or your authorized dealer.
9. Specifications
The following are the technical specifications for the Blaupunkt GTt 1200 DE Subwoofer Tube:
| Feature | Specification |
|---|---|
| Model | 1061210480001 |
| Speaker Type | Subwoofer |
| Subwoofer Diameter | 12 Inches |
| Speaker Maximum Output Power | 700 Watts |
| Speakers Nominal Output Power (RMS) | 200 Watts |
| Frequency Response | 35-500 Hz |
| Sensitivity | 91 dB |
| Connectivity Technology | Wired |
| Product Dimensions (L x W x H) | 51 x 35 x 35 cm |
| Item Weight | 7.92 kg |
| Indoor/Outdoor Usage | Indoor (Vehicle Interior) |
| Mounting Type | Floor Standing |
10. Warranty and Support
For warranty information, please refer to the warranty card included with your product or contact your authorized Blaupunkt dealer or the point of purchase. Keep your proof of purchase for warranty claims.
For technical support or further assistance, please visit the official Blaupunkt website or contact their customer service department. Contact details can typically be found on the manufacturer's website or product packaging.