KLEENGUARD 22475
KleenGuard™ V30 Nemesis™ Safety Glasses Instruction Manual
Model: 22475
Introduction
This manual provides essential information for the proper use, care, and maintenance of your KleenGuard™ V30 Nemesis™ Safety Glasses. Adhering to these instructions will ensure optimal performance and longevity of the product, contributing to your safety in various work environments.
Image: KleenGuard™ V30 Nemesis™ Safety Glasses with smoke lenses and black frame, featuring an attached neck cord.
Product Overview
The KleenGuard™ V30 Nemesis™ Safety Glasses are designed for personal eye protection, combining comfort, style, and durability. Key features include:
- Polycarbonate Lenses: Provide 99.9% UVA/UVB/UVC protection.
- Anti-Fog Coating: Helps maintain clear vision in various conditions.
- Patented FLEX-DRY Nosepiece: Designed for flexibility, sweat channeling, and slippage prevention for long-term comfort.
- Wraparound Frame: Offers extended peripheral protection with an 8-base curve.
- Soft Touch Temples: Enhance comfort during prolonged wear.
- Removable Neck Cord: For convenient securing and quick access.
- Compliance: Manufactured to comply with ANSI / ISEA Z87.1+ standard for personal eye protection.
Image: Close-up view of the patented FLEX-DRY nosepiece on KleenGuard™ Nemesis™ Safety Glasses, designed for comfort and sweat diversion.
Image: Illustration highlighting that the lenses provide 99.9% UVA/UVB/UVC protection.
Setup and Preparation
Your KleenGuard™ V30 Nemesis™ Safety Glasses are ready for use directly out of the packaging. No assembly is required. Before first use, and periodically thereafter, inspect the glasses for any signs of damage.
Initial Inspection:
- Check lenses for scratches, cracks, or haziness that could impair vision.
- Ensure the frame is intact and not bent or broken.
- Verify the nosepiece and temples are securely attached and free from damage.
- Confirm the neck cord is properly attached and not frayed.
Adjusting for Fit:
While the glasses are designed for a universal fit, ensure they sit comfortably and securely on your face without causing pressure points. The flexible temples and nosepiece adapt to various facial structures.
Operating and Usage
These safety glasses are intended for use in environments where eye protection against impacts, dust, and UV radiation is necessary. Always wear your safety glasses when performing tasks that pose a risk to your eyes.
Proper Wear:
- Position the glasses so that the lenses cover your eyes completely, extending to the sides for peripheral protection.
- Ensure the nosepiece rests comfortably on your nose bridge, and the temples extend over your ears without discomfort.
- The neck cord can be used to keep the glasses secure around your neck when not actively worn, preventing loss or damage.
Safety Standards:
KleenGuard™ V30 Nemesis™ Safety Glasses meet the ANSI / ISEA Z87.1+ standard, indicating they provide high-impact protection. This standard is crucial for personal eye protection in industrial and occupational settings.
Image: A worker wearing KleenGuard™ Nemesis™ Safety Glasses while performing tasks, demonstrating practical application.
Image: Text overlay stating that the glasses meet ANSI Z87.1+ and CSA Z94.3 standards for impact protection.
Maintenance
Proper maintenance extends the life of your safety glasses and ensures continued clear vision and protection.
Cleaning Instructions:
- Rinse the glasses under lukewarm running water to remove loose dirt and debris. Avoid hot water, which can damage coatings.
- Apply a mild soap or lens cleaning solution to the lenses.
- Gently rub the lenses and frame with a soft, lint-free cloth or microfiber cloth. Do not use abrasive materials or paper towels, as these can scratch the lenses.
- Rinse thoroughly to remove all soap residue.
- Air dry or gently blot dry with a clean, soft cloth.
Storage:
Store your safety glasses in a clean, dry place away from direct sunlight and extreme temperatures. Using a protective case (not included) can prevent scratches and damage when not in use.
Image: Close-up of the glasses highlighting features like patented Flex-Dry nosepiece, flexible temples, and anti-scratch resistant lenses.
Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Lenses Fogging Up | High humidity, temperature changes, sweat. | Ensure glasses are clean. The anti-fog coating should mitigate this; if persistent, ensure proper ventilation or re-clean with anti-fog solution. |
| Glasses Slipping Down Nose | Sweat, improper fit. | The FLEX-DRY nosepiece is designed to channel sweat. Ensure the nosepiece is clean. Adjust the position on your nose for a more secure fit. |
| Discomfort Behind Ears | Prolonged wear, improper temple adjustment. | The soft touch temples are designed for comfort. Ensure the temples are not pressing too tightly. Take short breaks from wearing if discomfort persists. |
| Scratched Lenses | Improper cleaning, abrasive contact. | Follow cleaning instructions carefully. Store glasses in a protective case when not in use. Severely scratched lenses should be replaced to ensure clear vision and protection. |
Specifications
| Model Number | 22475 |
| Brand | KLEENGUARD |
| Lens Material | Polycarbonate |
| Frame Material | Nylon |
| Lens Color | Smoke |
| UV Protection | 99.9% UVA/UVB/UVC |
| Safety Standard | ANSI / ISEA Z87.1+ |
| Product Dimensions | 1 x 1 x 1 inches; 1.28 ounces |
| Manufacturer | Kimberly-Clark Professional |
What's in the Box
- KleenGuard™ V30 Nemesis™ Safety Glasses (12 pairs, as per product description)
- Neck Cord (one per pair)
Image: A carton indicating "12 Pairs Per Carton" of KleenGuard™ Nemesis™ Safety Glasses.
Warranty and Support
For information regarding warranty coverage or product support, please contact Kimberly-Clark Professional directly. Refer to the packaging or the manufacturer's official website for the most current contact details and warranty terms.
Manufacturer: Kimberly-Clark Professional
For further assistance, you may visit the KLEENGUARD Store on Amazon.