Sunbeam Royal Ultra Heated Throw Instruction Manual

Important Safety Information

Please read all instructions carefully before using your Sunbeam Royal Ultra Heated Throw. Failure to follow these instructions may result in fire, electric shock, or injury.

• Do not use with infants, children, incapacitated persons, or anyone insensitive to heat.
• Do not use if the blanket is wet.
• Do not use with damaged cords or plugs.
• Ensure the controller is always placed in a location where it will not be covered by the blanket or other materials.
• Always unplug the throw when not in use.
• This product is designed for personal use as a throw blanket. Do not use as an underblanket or mattress pad.
• Do not dry clean.
• Do not iron.
• Do not use bleach.
• Do not wring.

Product Overview

The Sunbeam Royal Ultra Heated Throw provides cozy warmth with adjustable heat settings and a soft fleece fabric. It is designed for comfort and safety, featuring advanced heating technology and easy maintenance.

The Sunbeam Royal Ultra Heated Throw, folded neatly, showcasing its rich Cabernet color and the attached controller.

A person comfortably wrapped in the heated throw while seated in a chair, highlighting its cozy application.

A close-up view of the Royal Ultra fleece fabric, emphasizing its soft and cozy texture.

Key Features:

• Simple push button controller with LED indicator lights for ease of use.
• 4 customizable heat settings: warm, low, medium, high.
• 4-hour auto shut-off and overheat protection for enhanced safety.
• Stylish Cabernet red color, suitable for various home decors.
• Ideal size for snuggling: 50" x 60".
• Machine washable and dryer safe for easy care.
• Premium heated wires with advanced technology for continuous, safe heat distribution.
• ETL certified for safety.

Setup

1. Unpack the heated throw and controller from its packaging.
2. Lay the heated throw flat on your couch, bed, or desired surface. Ensure there are no wrinkles or folds.
3. Connect the controller to the blanket. Ensure the connection is secure.
4. Plug the power cord into a standard 120V AC electrical outlet.
5. Position the controller where it is easily accessible and will not be covered.

The heated throw spread out on a bed, demonstrating its ideal placement for use in a bedroom or living room.

An illustration of the throw's dimensions, 50 inches by 60 inches, indicating its generous size for snuggling.

Operating Instructions

1. Turning On: Press the power button on the controller to turn on the heated throw. The LED indicator lights will illuminate.
2. Adjusting Heat Settings: Use the push button to cycle through the 4 available heat settings: warm, low, medium, and high. Select your desired warmth level.
3. Auto Shut-Off: The heated throw is equipped with a 4-hour auto shut-off feature for safety and energy conservation. The throw will automatically turn off after 4 hours of continuous use.
4. Turning Off: Press the power button again to turn off the heated throw. Unplug the throw from the electrical outlet when not in use for extended periods.

The easy-to-use push button controller with LED lights indicating the selected heat setting and auto-off feature.

An illustration detailing the advanced wire technology within the blanket, ensuring continuous and safe heat distribution.

Maintenance and Care

Proper care will extend the life of your Sunbeam Royal Ultra Heated Throw.

1. Disconnect Controller: Before washing, always detach the controller from the heated throw.
2. Washing: Machine wash on a gentle cycle in cold water. Do not use bleach.
3. Drying: Tumble dry on low heat. Do not iron or dry clean. Do not wring. Ensure the throw is completely dry before reconnecting the controller and using.
4. Storage: Store the throw in a cool, dry place when not in use. Avoid folding tightly or placing heavy objects on top, which could damage the internal wires.

Illustration of detaching the controller before washing, emphasizing the easy care instructions for the heated throw.

Troubleshooting

If your heated throw is not operating correctly, please check the following:

• No Heat: Ensure the power cord is securely plugged into a working electrical outlet and the controller is firmly connected to the blanket. Check if the auto shut-off feature has activated.
• Controller Lights Flashing: This may indicate a fault or an issue with the connection. Unplug the throw from the wall, disconnect and reconnect the controller, and then plug it back in. If the issue persists, contact customer support.
• Uneven Heat: Ensure the blanket is laid flat without any folds or bunched areas that could prevent even heat distribution.

Specifications

Warranty and Support

The Sunbeam Royal Ultra Heated Throw comes with a 5-year limited warranty, ensuring quality and performance. For warranty claims, technical support, or any inquiries, please contact Sunbeam Customer Service.

Visit the official Sunbeam website for the most up-to-date support information and contact details: www.sunbeam.com