Citadel Shade: Athonian Camoshade Instruction Manual

Introduction

This manual provides instructions for the proper use and care of Games Workshop Citadel Shade: Athonian Camoshade, Model 24-08. This high-quality acrylic shade paint is designed for adding depth and shadows to miniatures and models, enhancing their visual appeal with a natural, matte finish.

Setup

Preparation

• Ensure the paint pot is sealed before first use.
• Shake the pot gently for 30 seconds to ensure the pigment is evenly mixed.
• Open the pot carefully to avoid spills.
• Prepare a clean, dry palette for dispensing the paint.
• Ensure your miniature or model surface is clean and primed for optimal adhesion.

Image of the Citadel Shade Athonian Camoshade paint pot, featuring a black label with white and green text. The pot contains a dark green liquid, indicating the shade color.

Operating Instructions

Application

1. Dip a clean brush into the Athonian Camoshade.
2. Remove excess paint from the brush by wiping it gently on the rim of the pot or a paper towel.
3. Apply the shade directly to the recessed areas and crevices of your model. The shade is designed to flow into these areas, creating natural shadows.
4. Avoid pooling the shade on flat surfaces, as this can lead to an uneven finish. If pooling occurs, gently wick away excess with a clean, damp brush.
5. Allow the shade to dry completely before applying additional layers or other paints. Full cure time is approximately 24 hours, but it will be touch-dry much sooner.

Image of the Citadel Colour Shade Athonian Camoshade paint pot, featuring a green label with white text. The pot contains a dark green liquid, showcasing the product's appearance.

Maintenance

Paint Care

• Always securely close the pot lid after use to prevent the paint from drying out.
• Store the paint pot upright in a cool, dry place, away from direct sunlight.
• Do not dilute the shade excessively, as this can reduce its shading properties.

Tool Cleaning

• Clean brushes immediately after use with water and a brush cleaner.
• Ensure all paint is removed from the bristles to maintain brush longevity.

Troubleshooting

• Issue: Shade appears too dark or pools excessively.
  Solution: Use less paint on the brush. Gently wick away excess shade with a clean, damp brush before it dries.
• Issue: Shade dries with an uneven or patchy finish.
  Solution: Ensure the model surface is clean and properly primed. Apply the shade in thin, even coats. Avoid overworking the paint once applied.
• Issue: Paint pot lid is stuck.
  Solution: Gently warm the lid under warm water (ensure the pot is sealed) to loosen dried paint. Use a cloth for better grip when twisting.

Specifications

Warranty Information

Games Workshop products are manufactured to high standards. For specific warranty details or concerns regarding product defects, please refer to the official Games Workshop website or contact their customer service directly. Proof of purchase may be required.

Support

For further assistance, product information, or technical support, please visit the official Games Workshop website or contact their customer service department. Keep your product model number (24-08) handy when seeking support.