1. Introduction
This manual provides essential information for the proper use and care of your Kushies Swim Diaper. Designed for comfort and functionality, this swim diaper allows water to easily pass through while effectively containing solids, making it ideal for use in public and private pools.
The X-Large size is suitable for children weighing approximately 35-50 lbs (16-23 kg).
2. Product Features
- Constructed from quick-drying nylon with a soft terry liner for enhanced comfort.
- Features a wrap-style design for convenient and easy changing.
- Equipped with an adjustable waist and additional ties to ensure a secure and customizable fit.
- Designed to allow water to pass through while securely containing solid waste.
3. Setup and Preparation
Before first use, inspect the swim diaper for any manufacturing defects or damage. Ensure the diaper is clean and dry.
3.1 Sizing and Fit
The X-Large Kushies Swim Diaper is designed for children weighing between 35-50 lbs (16-23 kg). A proper fit is crucial for the diaper's effectiveness.
- Ensure the diaper fits snugly around the waist and legs without being too tight or causing discomfort.
- Utilize the adjustable waist and ties to achieve a secure fit that prevents leakage of solids.
Figure 1: Unfolded view of the Kushies Swim Diaper, showing the wrap-style design and ties.
Figure 2: Size reference of the Kushies Swim Diaper, indicating a height of approximately 10 inches (24 cm).
4. Operating Instructions
4.1 Wearing the Swim Diaper
- Lay the swim diaper flat with the inner terry liner facing up.
- Position your child on the diaper, ensuring the back of the diaper is aligned with their lower back.
- Bring the front panel of the diaper up between your child's legs.
- Wrap the side panels around and secure them using the adjustable waist and ties. Ensure a snug fit around the waist and thighs to prevent leaks.
- The swim diaper is designed to be worn alone when in the water. If your child will be out of the water for extended periods, a regular diaper can be worn over or under the swim diaper for additional absorbency.
4.2 Usage Environment
This swim diaper is recommended for use in both public and private swimming pools to comply with health regulations regarding solid waste containment.
5. Maintenance and Care
Proper care will extend the life of your Kushies Swim Diaper and maintain its effectiveness.
- After Each Use: Rinse the swim diaper thoroughly with clean water immediately after swimming to remove chlorine or salt water.
- Washing: Machine wash cold with like colors. Use a mild detergent. Do not use bleach or fabric softeners, as these can degrade the fabric and elastic.
- Drying: Tumble dry on low heat or hang to dry. The nylon material is quick-drying. Avoid high heat, which can damage the fabric.
- Storage: Store the clean, dry swim diaper in a cool, dry place away from direct sunlight.
Note: The bias trim color and pattern may vary from what is shown in product images.
6. Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Diaper feels too small or causes discomfort. |
|
| Diaper does not contain solids effectively. |
|
| Diaper appears to be degrading or losing elasticity. |
|
7. Specifications
| Model Number | C628-RED |
| Product Dimensions | Approximately 0.1 x 0.1 x 0.1 inches (packaged) |
| Item Weight | 1.6 ounces |
| Target Gender | Unisex |
| Minimum Weight Recommendation | 40 Pounds (Note: Product title indicates 35-50 Lb range for X-Large size) |
| Maximum Weight Recommendation | 50 Pounds |
| Material Type | Nylon |
| Number of Items | 1 |
| Color | Red |
| Incontinence Protector Type | Swim Diaper |
8. Warranty and Support
For specific warranty information or product support, please refer to the manufacturer's official website or contact Kushies customer service directly.
You can visit the official Kushies Store for more information: Kushies Store on Amazon