Atlantic Water Gardens FP100

Atlantic Water Gardens FP100 Adjustable Flow Fountain and Water Feature Pump

Model: FP100 | Brand: Atlantic Water Gardens

Introduction

The Atlantic Water Gardens FP100 Adjustable Flow Fountain and Water Feature Pump is a compact submersible pump designed for small applications. It features a large, sturdy pre-filter, integrated flow control, versatile base plate, and a small diameter power plug. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your FP100 pump.

Atlantic Water Gardens FP100 Fountain Pump

A compact, grey submersible fountain pump with a blue adjustable flow control dial visible on the front and a threaded outlet on top.

Safety Information

Always disconnect power before handling the pump. Do not operate the pump dry. Ensure the pump is fully submerged during operation. This pump is designed for continuous duty in water features only. Do not use with flammable liquids. Keep children and pets away from the water feature when the pump is operating.

Package Contents

  • 1 x Atlantic Water Gardens FP100 Fountain Pump
  • 1 x Integrated Pre-filter
  • Assorted Fittings for tubing connection

Setup

  1. Pre-installation Check: Inspect the pump and power cord for any damage. Do not use if damaged.
  2. Placement: Place the pump on a stable, level surface at the bottom of your fountain or water feature. Ensure it is fully submerged and positioned to avoid drawing in large debris.
  3. Connecting Tubing: Attach appropriate tubing (not included) to the threaded outlet on top of the pump. The FP100 uses standard size fittings for various tubing types. Secure with a hose clamp if necessary.
  4. Electrical Connection: Connect the pump to a properly grounded 115 Volt electrical outlet. Ensure the power cord is routed safely to prevent tripping hazards or damage.

Official video from Atlantic Water Gardens explaining how to choose the perfect pump by calculating total dynamic head, covering flow rates, tubing friction, and vertical head height. This information is crucial for optimal pump performance and system design.

Operating Instructions

  • Initial Startup: Once the pump is fully submerged and connected, plug it into the power outlet. The pump should begin operating immediately.
  • Adjustable Flow Control: The FP100 features an integrated flow control dial on the front of the pump. Rotate the dial to increase or decrease the water flow to achieve your desired fountain effect.
  • Continuous Operation: The pump is designed for continuous operation. Ensure the water level in your feature remains adequate to keep the pump fully submerged at all times.

Maintenance

  • Cleaning the Pre-filter: The removable washable foam filter protects internal components. Regularly remove and clean the pre-filter to prevent clogging and maintain optimal flow. Frequency depends on water quality and debris.
  • Impeller Assembly: The impeller assemblies can be replaced quickly without tools for extended service life. Refer to the manufacturer's website for replacement parts and detailed instructions.
  • Winterization: In freezing climates, remove the pump from the water feature before the first freeze. Clean the pump thoroughly and store it in a frost-free location submerged in a bucket of water to keep seals lubricated.

Troubleshooting

ProblemPossible CauseSolution
Pump not runningNo power; clogged impeller; damaged impeller.Check power connection/outlet; clean impeller area; replace impeller.
Low water flowClogged pre-filter; kinked tubing; flow control set too low; pump not powerful enough for application.Clean pre-filter; straighten tubing; adjust flow control; verify pump's Total Dynamic Head (TDH) is suitable for your feature (refer to setup video).
Pump is noisyDebris in impeller; pump not fully submerged; pump operating dry.Disconnect power and clear debris from impeller; ensure pump is fully submerged; check water level.

Specifications

  • Model: FP100
  • Brand: Atlantic Water Gardens
  • Color: Grey
  • Material: Plastic, Polypropylene (PP), Stainless Steel
  • Power Source: Corded Electric
  • Voltage: 115 Volts
  • Product Dimensions: 3.5 x 2.25 x 2.5 inches
  • Item Weight: 10.4 ounces

Warranty & Support

For warranty information and technical support, please visit the official Atlantic Water Gardens website or contact their customer service department. Keep your purchase receipt for warranty claims.

© 2025 Atlantic Water Gardens. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.