Lutz #82 Safety Nose Retractable Blade Utility Knife User Manual

Introduction

This manual provides essential information for the safe and effective use of your Lutz #82 Safety Nose Retractable Blade Utility Knife. Please read this manual thoroughly before operation and retain it for future reference.

The Lutz #82 is a heavy-duty, industrial-quality retractable blade utility knife designed for reliability and durability. It features a specially built zinc retractor for smooth operation and a prominent safety nose overlap on both the top and bottom for enhanced user safety.

Safety Information

WARNING: Always exercise extreme caution when handling sharp blades. Keep out of reach of children.

• Always wear appropriate personal protective equipment, such as cut-resistant gloves and eye protection, when using or changing blades.
• Ensure the blade is fully retracted when the knife is not in use.
• Never attempt to catch a falling knife.
• Dispose of used blades safely in a designated sharps container.
• Do not apply excessive force when cutting; let the sharpness of the blade do the work.
• Keep hands and fingers clear of the blade path during operation.

Product Features

• Heavy-Duty Construction: Die-cast from zinc for optimum strength and durability.
• Retractable Blade: Allows for safe storage and adjustable cutting depth.
• Three Cutting Positions: Provides versatility for various cutting tasks.
• Safety Nose Overlap: Enhanced safety feature on both top and bottom of the knife.
• Internal Blade Storage: Conveniently stores additional blades within the handle.
• Ergonomic Design: Designed to fit comfortably in your hand.

Setup

Unpacking

Carefully remove the Lutz #82 Utility Knife from its packaging. Inspect the knife for any signs of damage. If any damage is observed, do not use the knife and contact customer support.

Blade Installation (Initial Setup)

The Lutz #82 knife comes furnished with 3 heavy-duty replacement blades stored inside the knife handle. To install a blade:

1. Locate the screw on the side of the knife handle.
2. Using a suitable screwdriver (not included), carefully loosen and remove the screw.
3. Gently separate the two halves of the knife handle.
4. Carefully place a new blade onto the blade holder pins, ensuring it is securely seated.
5. Realign the two halves of the handle and secure them by reinserting and tightening the screw. Do not overtighten.

Image: The Lutz #82 Utility Knife in yellow, showing the blade extended for use. Note the screw on the side for blade access.

Operating Instructions

Extending and Retracting the Blade

The Lutz #82 features a zinc retractor for smooth blade movement and three cutting positions.

1. To extend the blade, push the slider button forward along the track until it locks into one of the desired cutting positions.
2. To retract the blade, pull the slider button backward until the blade is fully enclosed within the handle. Always ensure the blade is fully retracted when not in use.

Image: The Lutz #82 Utility Knife in yellow, with the blade fully retracted into the handle, demonstrating safe storage.

Cutting Techniques

• Always cut away from your body.
• Use a cutting mat or a sacrificial surface underneath the material being cut to protect your work area.
• Apply steady, even pressure. For thicker materials, multiple shallow passes are safer and more effective than one deep cut.
• Ensure the material is stable and will not shift during cutting.

Maintenance

Blade Replacement

Replace the blade when it becomes dull or damaged. A dull blade requires more force and increases the risk of injury.

1. Follow the steps for blade installation as described in the "Setup" section.
2. Carefully remove the dull blade and dispose of it safely in a designated sharps container.
3. Install a new heavy-duty replacement blade.

Cleaning and Storage

• After each use, wipe down the knife with a dry cloth to remove any debris.
• Do not immerse the knife in water.
• Store the knife with the blade fully retracted in a dry, safe place, out of reach of children.

Troubleshooting

Specifications

• Model: 30282#82
• Blade Type: Retractable Utility Blade
• Handle Material: Zinc
• Blade Material: Stainless Steel
• Color: Yellow
• Weight: Approximately 0.35 Pounds
• Dimensions (L x W x H): Approximately 6.2 x 1.2 x 0.7 inches (Item Package Dimensions)
• Included: 1 Utility Knife, 3 Heavy-Duty Replacement Blades (stored internally)

Warranty and Support

For warranty information or technical support, please contact the manufacturer, Gorilla Glue, or refer to their official website. Keep your purchase receipt as proof of purchase.

Manufacturer: Gorilla Glue

UPC: 052427382023

ASIN: B0077AWCZM

For further assistance, you may visit the Gorilla Store on Amazon.