1. Product Overview
This manual provides essential information for the safe and efficient use of your GE 30W Standard Reflector Spot Light Bulb, model JNSN11715. This R20 bulb is designed for track lighting applications and features a medium E26/24 base. It provides 200 lumens of soft white light and has an average lifetime of 2000 hours.
Figure 1: GE 30W Standard Reflector Spot Light Bulb. This image displays the frosted R20 bulb with its standard screw-in base, designed for directional lighting.
2. Setup and Installation
Follow these steps to safely install your GE 30W Standard Reflector Spot Light Bulb:
- Safety First: Before attempting installation, ensure the power supply to the light fixture is turned off at the circuit breaker or fuse box. This prevents electrical shock.
- Verify Compatibility: Confirm that your light fixture is designed for an R20 bulb type and has a medium E26/24 base.
- Unpack the Bulb: Carefully remove the bulb from its packaging. Avoid touching the glass portion directly with bare hands, as oils can reduce bulb life. Use a clean cloth or gloves if necessary.
- Install the Bulb: Gently screw the bulb into the socket of your fixture. Turn clockwise until it is snug, but do not overtighten.
- Restore Power: Once the bulb is securely installed, restore power to the fixture from the circuit breaker or fuse box.
- Test: Turn on the light switch to confirm the bulb is functioning correctly.
Note: This bulb is designed for 120V electrical systems. Ensure your fixture's voltage matches the bulb's requirements.
3. Operation
Operating the GE 30W Standard Reflector Spot Light Bulb is straightforward:
- Power On/Off: Use the standard wall switch connected to your light fixture to turn the bulb on or off.
- Light Output: The bulb provides 200 lumens of light, suitable for accent lighting or general illumination in track lighting setups.
- Directional Lighting: As a reflector spot light, this bulb is designed to direct light in a specific direction, making it ideal for highlighting objects or areas.
4. Maintenance
The GE 30W Standard Reflector Spot Light Bulb requires minimal maintenance:
- Cleaning: To clean the bulb, ensure the power is off and the bulb has cooled completely. Wipe gently with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
- Replacement: The average lifetime of this bulb is 2000 hours. When the bulb reaches the end of its life, it will cease to illuminate. Replace it following the installation steps outlined in Section 2.
- Disposal: Dispose of old bulbs according to local regulations for electronic waste or glass.
5. Troubleshooting
If your GE 30W Standard Reflector Spot Light Bulb is not functioning as expected, consider the following:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up. |
|
|
| Bulb flickers. |
|
|
If troubleshooting steps do not resolve the issue, contact GE customer support or a qualified electrician.
6. Product Specifications
| Feature | Detail |
|---|---|
| Model Number | JNSN11715 |
| Part Number | 14891 |
| Brand | GE |
| Wattage | 30 Watts |
| Voltage | 120 Volts |
| Luminous Flux | 200 Lumens |
| Average Lifetime | 2000 hours |
| Base Type | Medium E26/24 |
| Bulb Type | R20 Reflector Spot Light |
| Color/Finish | Soft White / Frosted |
| Material | Copper |
| Product Dimensions | 1.34 x 5.5 x 4.75 inches |
| Item Weight | 1.76 ounces |
| Usage | Recessed, Track Lights |
7. Warranty and Support
For warranty information or technical support regarding your GE 30W Standard Reflector Spot Light Bulb, please contact GE customer service directly. You can often find support contact details on the product packaging or by visiting the official GE website.
For more information about GE products, you may visit the GE Store on Amazon.