Hobby King 2200mAh 3S 40C Lipo Pack
Turnigy 2200mAh 3S 40C Lipo Pack User Manual
Model: 2200mAh 3S 40C Lipo Pack
Introduction
This manual provides essential information for the safe and effective use of your Turnigy 2200mAh 3S 40C Lipo Pack. Please read this manual thoroughly before use to ensure proper handling, charging, and storage procedures are followed. Adhering to these guidelines will help maximize the lifespan and performance of your battery.
Image: The Turnigy 2200mAh 3S 40C Lipo Pack, a blue rectangular battery with multiple colored wires (red, black, yellow, blue) extending from one end, terminating in a white balance connector and a yellow XT60 discharge connector. The battery label shows "TURNIGY power system" and "HIGH DISCHARGE LIPO BATTERY" along with "2.2" indicating 2200mAh capacity.
Safety Precautions
Lithium Polymer (LiPo) batteries are powerful and require careful handling. Failure to follow safety instructions can result in fire, personal injury, and property damage. Always observe the following:
- Never leave charging batteries unattended.
- Charge LiPo batteries only with a compatible LiPo charger designed for the correct cell count and voltage.
- Do not overcharge or over-discharge the battery.
- Store batteries in a fire-safe container or bag, away from flammable materials.
- Do not puncture, disassemble, short-circuit, or expose the battery to extreme temperatures.
- If the battery swells, smokes, or shows any signs of damage, immediately disconnect it and place it in a fire-safe location.
- Keep out of reach of children.
Setup
Before first use, ensure your battery is fully charged and balanced. Inspect the battery for any physical damage or swelling. Connect the battery to your compatible device (e.g., RC vehicle) using the appropriate discharge connector (XT60). Connect the balance lead to your charger for balancing during charging.
Operating
This LiPo pack is designed for high-discharge applications, such as RC vehicles. Ensure your electronic speed controller (ESC) and motor are compatible with a 3S (11.1V) LiPo battery and can handle the continuous discharge rate of 40C. Monitor battery voltage during operation to avoid over-discharging, which can permanently damage the battery. Most ESCs have a low-voltage cutoff (LVC) feature; ensure it is set correctly for LiPo batteries.
Charging Instructions
Always charge your Turnigy LiPo battery using a dedicated LiPo charger with balancing capabilities. Follow these steps:
- Connect the main discharge plug (XT60) of the battery to the charger's main output port.
- Connect the balance lead (JST-XH) of the battery to the charger's balance port. Ensure the correct cell count (3S) is selected on the charger.
- Set the charge current. For a 2200mAh battery, a 1C charge rate is 2.2 Amps. Charging at 1C is generally recommended for battery longevity.
- Initiate the balance charge program on your charger.
- Monitor the charging process. Disconnect the battery once charging is complete.
Do not charge the battery if it is hot from use. Allow it to cool down first. Never charge a damaged or swollen battery.
Maintenance and Storage
Proper maintenance and storage are crucial for the longevity and safety of your LiPo battery:
- Storage Voltage: For long-term storage, charge or discharge the battery to its storage voltage (typically 3.8V-3.85V per cell).
- Temperature: Store batteries in a cool, dry place, away from direct sunlight and extreme temperatures.
- Physical Inspection: Regularly inspect the battery for any signs of damage, such as swelling, punctures, or frayed wires.
- Disposal: Do not dispose of LiPo batteries in regular household waste. They must be disposed of at a specialized battery recycling facility. Fully discharge the battery before disposal.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Battery not charging | Incorrect charger settings, faulty charger, damaged battery, poor connection. | Verify charger settings (cell count, current). Check all connections. Try another charger if available. Inspect battery for damage. |
| Battery swells during charge/discharge | Overcharging, over-discharging, internal damage, manufacturing defect. | Immediately disconnect and place in a fire-safe location. Do not use. Dispose of safely. |
| Short run time | Battery degradation, over-discharging, high current draw from device, incorrect capacity. | Ensure battery is fully charged and balanced. Check device's power consumption. Consider battery replacement if degradation is significant. |
Specifications
The following are the key specifications for the Turnigy 2200mAh 3S 40C Lipo Pack:
- Minimum Capacity: 2200mAh
- Configuration: 3S1P / 11.1V / 3Cell
- Constant Discharge: 40C
- Peak Discharge (10sec): 50C
- Pack Weight: 204g
- Pack Size: 104 x 27 x 35mm
- Charge Plug: JST-XH
- Discharge Plug: XT60
- Recommended Use: Remote Control Vehicle
Warranty and Support
For warranty information or technical support, please refer to the official Hobby King website or contact their customer service. Keep your purchase receipt as proof of purchase.
Manufacturer: Turnigy
Brand: Hobby King
Date First Available: January 27, 2012