Sony STRDH130
Sony STRDH130 2 Channel Stereo Receiver
Model: STRDH130
Introduction
The Sony STRDH130 is a 2-channel stereo receiver designed to deliver powerful and clear audio for your home entertainment system. With 270 watts of total power, it provides robust sound performance for a variety of audio sources. This receiver features multiple analog audio inputs, an AM/FM tuner, and convenient outputs for connecting to your speakers and other devices. Its straightforward design ensures ease of use while providing high-fidelity sound.
Package Contents
- Sony STRDH130 Stereo Receiver
- FM wire antenna
- AM loop antenna
- AA batteries (for remote control)
- Remote control
Setup
Before connecting any components, ensure the receiver is unplugged from the power outlet. Place the receiver on a stable, flat surface with adequate ventilation around it.
Connecting Speakers
Connect your speakers to the SPEAKER terminals on the rear panel. Ensure correct polarity (+ to + and - to -) for optimal sound. The receiver supports two sets of speakers (A and B).
Figure 1: Rear panel connections, including speaker terminals and various audio inputs.
Connecting Audio Components
Use RCA audio cables to connect your audio sources (e.g., CD player, DVD player, gaming console) to the corresponding analog audio input jacks on the rear panel. The receiver provides 5 analog audio inputs. For smartphones or portable music players, use the dedicated 3.5mm mini-jack input on the front panel.
Connecting Antennas
Connect the supplied FM wire antenna to the FM 75Ω COAXIAL terminal and the AM loop antenna to the AM terminals on the rear panel for radio reception.
Power Connection
Once all audio and speaker connections are made, plug the receiver's power cord into a wall outlet.
Operating Instructions
Powering On/Off
Press the I/O (Power) button on the front panel or the remote control to turn the receiver on or off. The receiver features an Auto Standby function that automatically switches it to standby mode if it is not in use or no audio signal is sent to it for 30 minutes.
Figure 2: Front panel controls, including the power button, input selector, and volume knob.
Selecting an Input Source
Rotate the INPUT SELECTOR knob on the front panel or use the corresponding input buttons on the remote control (e.g., VIDEO, BD/DVD, SA-CD/CD, TUNER, PORTABLE, MD/TAPE) to select your desired audio source.
Adjusting Volume
Turn the MASTER VOLUME knob on the front panel clockwise to increase volume and counter-clockwise to decrease it. You can also use the VOL +/– buttons on the remote control.
Tuner Operation (FM/AM)
Press the TUNER button on the remote or rotate the INPUT SELECTOR to select FM or AM. Use the TUNING +/- buttons to manually tune to a station. You can store your favorite stations using the MEMORY/ENTER button and number buttons (0-9) on the remote. The receiver supports 30 presets for both FM and AM stations.
Adjusting Bass and Treble
Use the BASS +/- and TREBLE +/- buttons on the front panel or remote control to adjust the low and high frequency response of the audio output.
Using the Remote Control
The supplied remote control provides full functionality for the receiver, including power, input selection, volume, tuning, and menu navigation. Ensure the batteries are correctly inserted.
Figure 3: The Sony STRDH130 receiver shown with its full-function remote control.
Maintenance
To ensure long-term performance and appearance of your Sony STRDH130 receiver, follow these maintenance guidelines:
- Cleaning: Wipe the exterior surfaces with a soft, dry cloth. Do not use abrasive pads, scouring powder, or solvents such as alcohol or benzene.
- Ventilation: Ensure proper ventilation by keeping the top and sides of the receiver clear of obstructions. Do not block the ventilation holes.
- Dust: Regularly dust the unit to prevent accumulation, which can affect performance and lead to overheating.
- Power Cord: Periodically check the power cord for any damage. If damaged, contact qualified service personnel.
Troubleshooting
If you experience issues with your receiver, try the following basic troubleshooting steps:
- No Power: Ensure the power cord is securely plugged into a working electrical outlet. Check if the power button is pressed.
- No Sound: Verify that the correct input source is selected. Check all audio cable connections between the receiver and your audio components, and between the receiver and your speakers. Ensure speaker wires are correctly connected to the appropriate terminals and that speaker A/B selection is correct. Adjust the volume level.
- Poor Radio Reception: Adjust the position of the FM wire antenna and AM loop antenna. Ensure they are fully extended and away from other electronic devices that might cause interference.
- Remote Control Not Working: Check the batteries in the remote control and replace them if necessary. Ensure there are no obstructions between the remote and the receiver's remote sensor.
- Unit Shuts Off Automatically: This may be due to the Auto Standby function. If it happens unexpectedly, ensure proper ventilation to prevent overheating.
If the problem persists after trying these steps, please refer to the full user manual or contact Sony customer support.
Specifications
| Feature | Specification |
|---|---|
| Brand | Sony |
| Model Number | STRDH130 |
| Product Dimensions | 21.2 x 10.9 x 15.4 inches |
| Item Weight | 14 pounds |
| Connectivity Technology | Wired |
| Controller Type | Hand Control |
| Special Feature | 2 Channel, 5 analog audio inputs, AM/FM tuner, Auto standby |
| Compatible Devices | Smartphone, Speaker, Television |
| Connector Type | 3.5mm Jack, RCA |
| Audio Encoding | Stereo |
| Audio Output Mode | Stereo |
| Surround Sound Channel Configuration | 2 |
| Color | Black |
Warranty and Support
For detailed warranty information and customer support, please refer to the official Sony website or the complete user manual provided with your product. You can also find the full user manual in PDF format here.
For service or technical assistance, please contact Sony customer support directly.
