Introduction
Thank you for choosing the Kenstar Vibrant 20L Air Cooler. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. The Vibrant Cooler features a sleek design and is designed for effective cooling in compact and small spaces, preventing mosquitos and small insects from entering the cooling pads for cleaner air.
Important Safety Instructions
- Read all instructions carefully before operating the cooler.
- Ensure the power supply matches the voltage specified on the cooler (150-240 volts).
- Do not immerse the cooler, cord, or plug in water or other liquids.
- Always unplug the cooler from the power outlet before cleaning, servicing, or moving.
- Keep the cooler away from children and pets.
- Do not operate the cooler with a damaged cord or plug.
- Place the cooler on a stable, level surface to prevent tipping.
Product Overview
The Kenstar Vibrant 20L Air Cooler is designed for efficient personal cooling. Key features include:
- Product Dimensions: 345mm (W) x 340mm (D) x 885mm (H)
- Air Throw Distance: 35 feet
- Air Delivery: 1160 m³/hr
- Air Deflection: 4-way
- Speed Settings: 3 speeds
- Cooling Area: 20 square meters
- Louvre Movement: Motorized (Vertical)
- Cooling Media: Honeycomb evaporative pads
- Capacity: 20 liters
- Special Feature: Mosquito/Insect Protection
This image shows the Kenstar Vibrant 20L Air Cooler in white, highlighting its compact tower design and control panel.
Setup
Unpacking
- Carefully remove the cooler from its packaging.
- Remove all packing materials, including any protective films or tapes.
- Inspect the cooler for any signs of damage. If damaged, do not operate and contact customer service.
Placement
- Place the cooler on a firm, level surface to ensure stability and proper water distribution.
- Ensure there is adequate space around the cooler for proper air intake and exhaust. Avoid placing it directly against a wall.
- For optimal cooling, position the cooler near an open window or door to draw in fresh air.
Water Filling
- Locate the water inlet on the cooler.
- Fill the water tank with clean, fresh water. The maximum capacity is 20 liters.
- Do not overfill the tank beyond the 'MAX' indicator to prevent spillage.
- For enhanced cooling, you may add ice cubes to the water tank if a dedicated ice chamber is present (refer to product design).
Operating Instructions
Power Connection
- Ensure the cooler is correctly positioned and the water tank is filled.
- Plug the power cord into a suitable 150-240 volt AC power outlet.
Control Panel
The Kenstar Vibrant cooler features a user-friendly button control panel.
- Power Button: Press to turn the cooler ON or OFF.
- Speed Button: Cycle through the 3 available fan speeds (Low, Medium, High) to adjust airflow.
- Swing Button: Activate or deactivate the motorized vertical louvre movement for wider air distribution.
Maintenance
Regular maintenance ensures optimal performance and longevity of your Kenstar Vibrant Air Cooler.
Cleaning the Exterior
- Always unplug the cooler before cleaning.
- Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
Cleaning the Water Tank
- Drain any remaining water from the tank using the drain plug (if available) or by carefully tilting the unit.
- Clean the inside of the water tank with a mild detergent and water. Rinse thoroughly to remove all soap residue.
- Regularly clean the water tank to prevent algae growth and maintain air quality.
Cleaning Honeycomb Pads
- The honeycomb pads should be cleaned periodically, especially if you notice reduced airflow or an odor.
- Refer to the cooler's design for access to the pads. Gently remove them and rinse under running water to remove dust and mineral deposits.
- Allow the pads to dry completely before reinserting them.
Mosquito/Insect Protection
The cooler is designed with features to prevent mosquitos and small insects from entering the cooling pads. Ensure all covers are properly secured after maintenance to maintain this protection.
Troubleshooting
Before contacting customer service, please refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Cooler does not turn on | No power supply; Power cord not plugged in; Fuse blown | Check power outlet; Ensure cord is securely plugged in; Check household fuse/circuit breaker. |
| No cooling effect | Low water level; Water pump not working; Dirty honeycomb pads | Fill water tank; Check if pump is operating (listen for sound); Clean honeycomb pads. |
| Water leakage | Overfilling the water tank; Drain plug not secured; Unit not level | Do not fill past 'MAX' line; Ensure drain plug is tightly closed; Place cooler on a level surface. |
| Unusual noise | Obstruction in fan; Unit not level; Loose components | Unplug and check for obstructions; Ensure unit is level; Contact service if noise persists. |
Specifications
| Feature | Specification |
|---|---|
| Brand | Kenstar |
| Model Name | Vibrant |
| Material | Fibre |
| Mounting Type | Freestanding |
| Colour | White |
| Controls Type | Button |
| Reservoir Capacity | 20 Liters |
| Item Weight | 12 Kilograms |
| Recommended Uses | Residential cooling in small to medium rooms or apartments |
| Wattage | 130 Watts |
| Number Of Speeds | 3 |
| Voltage | 150-240 Volts |
| Item Dimensions (D x W x H) | 34D x 34.5W x 88.5H Centimeters |
| Special Features | Motorized Louvre Movement, Mosquito/Insect Protection |
Warranty and Support
Warranty Information
The Kenstar Vibrant 20L Air Cooler comes with a 1-year warranty on the product from the date of purchase. Please retain your purchase receipt as proof of warranty.
Customer Support
For any service, repair, or warranty claims, please contact Kenstar customer service. Refer to the contact information provided with your product packaging or visit the official Kenstar website for support details.