Introduction
The Light & Motion SOLA Photo 1200 is a compact and powerful underwater light designed for photo and video enthusiasts. It offers both white and red flood beams, providing versatility for various underwater lighting needs. This manual provides essential information for the safe and effective use, setup, operation, and maintenance of your SOLA Photo 1200 light.
Figure 1: Angled view of the SOLA Photo 1200 light, showcasing its compact design.
Package Contents
Upon unpacking, please ensure all items are present and in good condition.
- SOLA Photo 1200 Underwater Light
- Lithium Ion Battery (integrated)
- Charger (typically included, though not explicitly listed in product data)
- Mounting strap (often included, implied from product images)
If any items are missing or damaged, please contact Light & Motion customer support.
Setup
1. Initial Charge
Before first use, fully charge the SOLA Photo 1200 light. The light features a factory-sealed design with external charge ports for reliability.
- Locate the external charge port on the light.
- Connect the provided charger to the light's charge port.
- Plug the charger into a power outlet.
- The indicator light on the charger or light will show charging status. Allow the light to charge until the indicator shows a full charge.
2. Mounting
The SOLA Photo 1200 can be mounted using various accessories. A common method involves a hand strap or arm mount.
Figure 2: The SOLA Photo 1200 light attached to a mounting strap.
- Attach the light to your preferred mounting system (e.g., hand strap, camera tray arm).
- Ensure the light is securely fastened to prevent accidental detachment during use.
Operating Instructions
The SOLA Photo 1200 features intuitive controls for power, beam type, and brightness.
Figure 3: Side view of the SOLA Photo 1200, highlighting the control switch and charge ports.
1. Power On/Off
- To turn on: Slide the magnetic switch forward.
- To turn off: Slide the magnetic switch backward.
2. Switching Beam Modes (White/Red)
The SOLA Photo 1200 offers both a 1200 lumen white flood beam and a 300 lumen red flood beam.
- While the light is on, quickly slide the magnetic switch forward and release to toggle between white and red beam modes.
3. Adjusting Brightness Levels
Each beam mode has multiple power levels, providing constant illumination with adjustable brightness.
- While the light is on and in the desired beam mode, slide the magnetic switch forward and hold briefly. The light will cycle through brightness levels. Release the switch at the desired level.
- The light's regulated output ensures consistent brightness throughout the battery life.
Figure 4: Front view of the SOLA Photo 1200, showing the white and red LED emitters.
4. Battery Status Indicator
The light typically includes an indicator to show remaining battery life. Refer to the light's specific LED color codes or patterns for detailed battery status.
Maintenance
Proper maintenance ensures the longevity and reliable performance of your SOLA Photo 1200 light.
- Rinse After Use: After every dive, thoroughly rinse the light with fresh water to remove salt, sand, and other debris.
- Inspect: Regularly inspect the light for any signs of damage, especially around the charge ports and magnetic switch.
- Charging: Recharge the light after each use or before extended storage to maintain battery health. Avoid fully depleting the battery for prolonged periods.
- Storage: Store the light in a cool, dry place away from direct sunlight.
- Avoid Disassembly: The light has a factory-sealed design. Do not attempt to open or disassemble the unit, as this will void the warranty and compromise its waterproof integrity.
Troubleshooting
If you encounter issues with your SOLA Photo 1200 light, refer to the following common troubleshooting steps.
- Light Not Turning On:
- Ensure the battery is fully charged.
- Verify the magnetic switch is fully engaged in the "on" position.
- Light Dims Unexpectedly:
- The battery may be low. Recharge the light.
- The light has regulated output, so dimming due to low battery should be gradual or indicated by a warning. If sudden, contact support.
- Charging Issues:
- Ensure the charger is properly connected to both the light and the power outlet.
- Check if the power outlet is functional.
- Inspect the charge port and charger cable for any damage.
- Water Leakage:
- Immediately cease use.
- Do not attempt to open the light.
- Contact Light & Motion customer support for assistance.
For issues not covered here, please contact Light & Motion customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Light & Motion |
| Model Name | Sola |
| Model Number | 850-0176-D |
| White Beam Output | 1200 Lumens (60-degree flood) |
| Red Beam Output | 300 Lumens (60-degree flood) |
| Battery Life (Max) | 280 minutes |
| Battery Type | Integrated Lithium Ion |
| Depth Rating | 100m (330ft) |
| Weight | 16 ounces |
| Water Resistance Level | Waterproof |
| Flash Modes Description | Constant illumination with adjustable brightness |
| UPC | 812190012837, 812190014534 |
Warranty Information
The Light & Motion SOLA Photo 1200 Underwater Light comes with a 2-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use.
Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, unauthorized modifications, or improper maintenance. For full warranty terms and conditions, please refer to the official Light & Motion website or contact customer support.
Support
For technical assistance, troubleshooting, warranty claims, or general inquiries regarding your Light & Motion SOLA Photo 1200, please contact Light & Motion customer support.
- Official Website: www.lightandmotion.com
- Brand Store on Amazon: Visit the Light & Motion Store
Always refer to the manufacturer's official resources for the most up-to-date information and support.