Introduction
Thank you for purchasing the Teac AD-RW900-B CD Recorder and Auto Reverse Cassette Deck. This versatile audio component allows you to record to CD and cassette, play back various audio formats, and connect via USB. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.
Please read this manual thoroughly before using the unit and keep it for future reference.
Important Safety Information
To prevent fire or shock hazard, do not expose this appliance to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.
- Power Source: Connect the unit only to an AC outlet of the voltage specified on the rear panel.
- Ventilation: Ensure adequate ventilation. Do not block ventilation openings.
- Water and Moisture: Do not expose the unit to dripping or splashing. Do not place objects filled with liquids, such as vases, on the unit.
- Cleaning: Unplug the unit from the wall outlet before cleaning. Use a dry cloth only.
- Servicing: Do not attempt to service the unit yourself. Refer all servicing to qualified service personnel.
Package Contents
Verify that all items listed below are included in the package:
- Teac AD-RW900-B Main Unit
- Remote Control (RC-1283)
- Power Cord
- RCA Audio Cable (Stereo)
- User Manual (this document)
Image: Front view of the Teac AD-RW900-B unit, showcasing the CD tray, cassette deck, and control panel.
Product Overview
Front Panel Controls and Indicators
Image: Angled view of the Teac AD-RW900-B, showing the open CD tray with a disc and a cassette tape inserted into the deck.
- POWER Button: Turns the unit on or off.
- CD Tray: For inserting and removing CDs.
- Cassette Deck: For inserting and playing/recording cassette tapes.
- Display: Shows track information, recording levels, and operational status.
- REC LEVEL Knob: Adjusts the recording input level.
- SOURCE Button: Selects the input source for recording (CD, TAPE, USB, LINE IN).
- USB Port (Front): For connecting USB storage devices for playback or recording.
- PHONES Jack: For connecting headphones.
- PITCH CONTROL: Adjusts playback speed for cassette.
Rear Panel Connections
The rear panel features various input and output connections for integrating the unit into your audio system.
- LINE IN (RCA): Audio input for connecting external devices like turntables or other audio players.
- LINE OUT (RCA): Audio output for connecting to an amplifier or receiver.
- USB Port (Rear): Additional USB port for connecting storage devices.
- AC IN: Power cord connection.
Remote Control (RC-1283)
Image: The RC-1283 remote control unit, showing various buttons for CD, USB, and Tape functions, including record, play, stop, and track navigation.
The included remote control provides convenient access to most functions. Ensure batteries are correctly inserted.
- SOURCE Buttons: Selects input source (CD, USB, TAPE).
- RECORD Buttons: Initiates recording for CD, USB, or Tape.
- Playback Controls: Play, Pause, Stop, Fast Forward, Rewind, Skip Track.
- FINALIZE/ERASE: Finalizes a CD-R/RW or erases a track/disc.
- REC LEVEL +/-: Adjusts recording level.
Setup
1. Placement
Place the unit on a flat, stable surface away from direct sunlight, heat sources, and excessive dust or vibrations. Allow adequate space around the unit for proper ventilation.
2. Power Connection
- Ensure the unit's POWER button is in the OFF position.
- Connect the supplied power cord to the AC IN terminal on the rear panel of the unit.
- Plug the other end of the power cord into a suitable wall outlet.
3. Audio Connections
Connect the AD-RW900-B to your audio system using RCA cables.
- Connecting to an Amplifier/Receiver (Output):
Connect the LINE OUT (RCA) jacks on the AD-RW900-B to an available audio input (e.g., CD, AUX, TAPE IN) on your amplifier or receiver. Match the red plug to the R (right) jack and the white plug to the L (left) jack.
- Connecting External Audio Sources (Input):
To record from an external device (e.g., turntable, another cassette deck, or a digital audio player), connect its audio output to the LINE IN (RCA) jacks on the AD-RW900-B. Match red to R and white to L.
Operating Instructions
Basic Operation
- Press the POWER button to turn the unit on. The display will light up.
- Use the SOURCE button on the front panel or remote to select the desired playback or recording source (CD, TAPE, USB, LINE IN).
CD Playback
- Press the OPEN/CLOSE button to open the CD tray.
- Place a CD (audio CD or MP3 CD) onto the tray with the label side up.
- Press OPEN/CLOSE again to close the tray. The unit will read the disc.
- Press the PLAY (►) button to start playback.
- Use the SKIP (►►| / |◄◄) buttons to navigate between tracks.
- Press STOP (■) to stop playback.
Cassette Playback
- Open the cassette deck door.
- Insert a cassette tape with the desired side facing forward.
- Close the cassette deck door.
- Press the PLAY (►) button for the cassette deck to start playback.
- The unit features auto-reverse. To manually reverse the tape side, press the REV MODE button.
- Use the FAST FORWARD (►►) and REWIND (◄◄) buttons for tape navigation.
- Press STOP (■) to stop playback.
CD Recording
The AD-RW900-B can record to CD-R or CD-RW discs. Use audio-specific CD-R/RW discs for best results.
- Insert a blank recordable CD (CD-R or CD-RW) into the CD tray.
- Select the desired input source (TAPE, USB, or LINE IN) using the SOURCE button.
- Adjust the REC LEVEL knob to ensure the recording level does not peak into the red on the display.
- Press the RECORD (●) button for the CD section. The unit will enter record-pause mode.
- Start playback on your source device (e.g., press PLAY on the cassette deck).
- Press PLAY (►) on the CD section to begin recording.
- To stop recording, press STOP (■) on the CD section.
- Finalizing the CD: After recording, it is crucial to finalize the CD to make it playable on other CD players. Press the FINALIZE/ERASE button (CD section) and follow the on-screen prompts.
Cassette Recording
The unit supports recording to standard cassette tapes.
- Insert a blank cassette tape into the cassette deck.
- Select the desired input source (CD, USB, or LINE IN) using the SOURCE button.
- Adjust the REC LEVEL knob to ensure optimal recording levels.
- Press the RECORD (●) button for the cassette deck. This will also engage PLAY.
- Start playback on your source device (e.g., press PLAY on the CD section).
- To stop recording, press STOP (■) on the cassette deck.
USB Playback and Recording
The AD-RW900-B supports USB flash drives for MP3 playback and recording audio to MP3 files.
- USB Playback: Insert a USB flash drive into the front or rear USB port. Select USB as the source. Use the playback controls to navigate and play MP3 files.
- USB Recording: Select the desired input source (CD, TAPE, or LINE IN). Insert a USB flash drive. Press the RECORD (●) button for the USB section. Start playback on your source. Press PLAY (►) on the USB section to begin recording.
Maintenance
- Cleaning the Unit: Wipe the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- CD Lens Cleaning: If CD playback issues occur, use a commercially available CD lens cleaner disc.
- Cassette Head Cleaning: Regularly clean the cassette deck's heads, capstans, and pinch rollers using a cotton swab lightly dampened with isopropyl alcohol. This helps maintain sound quality and prevent tape damage.
- Demagnetizing: Periodically demagnetize the cassette heads using a cassette head demagnetizer to prevent high-frequency loss.
Troubleshooting
If you experience problems with your unit, please refer to the following table before seeking service.
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cord not connected; Power button off. | Ensure power cord is securely plugged in; Press the POWER button. |
| No sound output | Incorrect source selected; Cables not connected properly; Amplifier volume too low. | Select correct SOURCE; Check RCA cable connections; Increase amplifier volume. |
| CD will not play / "CAN'T READ" error | Disc is dirty or scratched; Disc inserted incorrectly; Unfinalized CD-R/RW. | Clean or replace disc; Insert disc label side up; Finalize the CD-R/RW if it was recorded on this unit. |
| Poor recording quality | Recording level too high/low; Dirty cassette heads; Poor quality tape/CD-R. | Adjust REC LEVEL; Clean cassette heads; Use high-quality audio media. |
| Remote control not working | Batteries are dead or inserted incorrectly; Obstruction between remote and unit. | Replace batteries; Ensure correct polarity; Remove obstructions. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | AD-RW900-B |
| Brand | Teac |
| Product Dimensions | 12 x 17 x 6 inches; 13 Pounds |
| Connectivity Technology | USB |
| Color | Black |
| Included Components | Remote Control |
| Manufacturer | Teac |
| First Available Date | December 6, 2011 |
Warranty and Support
Teac products are designed for reliability and performance. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Teac website.
For technical support, service, or further inquiries, please contact Teac customer support. You may also find additional resources, including the full PDF user manual, on the Teac support website or via the link below:
