1. Product Overview
The Bosch H352 Rear Wiper Blade is designed to provide clear visibility and reliable performance for the rear windshield of your vehicle. Manufactured to high-quality standards, this blade features wear-resistant natural rubber for smooth and quiet operation, along with a specially coated wiping edge for extended service life. It is engineered to suit a wide range of domestic, Asian, and European vehicles, ensuring an optimal fit and function.
Image: The Bosch H352 Rear Wiper Blade, 14 inches, shown in its retail packaging. The packaging prominently displays the Bosch logo and "REAR" designation.
2. Key Features
- Easy Installation: Features integrated rear quick-clip connections for fast and hassle-free installation, saving you time and effort.
- All-Weather Performance: Specialty coated natural rubber ensures smooth, quiet operation and a clean, consistent wipe in any weather condition.
- Quiet and Smooth Operation: Designed for noise-free performance, providing a comfortable and seamless driving experience.
- OE Style Blade Design: Offers an Original Equipment (OE) fit, function, and appearance, maintaining the original quality and style of your vehicle.
- Application Specific: Engineered and designed to application-specific wiping systems, making installation easy and ensuring optimal performance.
Image: A diagram illustrating the key components and features of a Bosch wiper blade, including the weather-shielded connector, aerodynamic wind spoiler, exclusive fx dual rubber compound, and dual precision-tensioned steel spring.
3. Installation Guide
Proper installation ensures optimal performance and longevity of your Bosch H352 Rear Wiper Blade. Always refer to your vehicle's owner's manual for specific instructions regarding wiper blade replacement, as procedures may vary by vehicle model.
- Prepare Your Vehicle: Park your vehicle on a level surface and turn off the ignition. Lift the rear wiper arm away from the windshield until it locks into the upright position. If the arm does not lock, hold it firmly during the entire process.
- Remove the Old Blade: Locate the release tab or button on the wiper blade connector. Press or lift the tab and slide the old wiper blade off the wiper arm. Be careful not to let the wiper arm snap back onto the windshield, as this could damage the glass.
- Attach the New Blade: Align the new Bosch H352 wiper blade's quick-clip connector with the wiper arm. Slide the blade onto the arm until it clicks securely into place. Gently tug on the blade to ensure it is firmly attached.
- Return Wiper Arm: Carefully lower the wiper arm back onto the windshield.
- Test Operation: Turn on your vehicle and activate the rear wipers to ensure they operate smoothly and clear the windshield effectively.
Image: A visual representation of a hand holding a wiper blade, demonstrating the process of detaching or attaching the blade from the wiper arm, highlighting the quick-clip connection.
4. Operation and Care
The Bosch H352 Rear Wiper Blade is designed for optimal performance in various weather conditions. To ensure its longevity and effectiveness:
- Regular Cleaning: Periodically clean the rubber blade element with a soft cloth or sponge and mild soap and water to remove dirt, grime, and road film. This helps prevent streaking and extends blade life.
- Inspect for Damage: Regularly inspect the blade for any signs of wear, cracks, tears, or hardening of the rubber. Replace the blade if any damage is observed.
- Avoid Dry Wiping: Do not operate the wipers on a dry windshield, as this can damage the blade and scratch the glass. Always use windshield washer fluid.
- Clear Ice and Snow: Before operating wipers in freezing conditions, ensure that any ice or heavy snow is cleared from the windshield and the wiper blades to prevent damage.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Streaking | Dirty blade, worn rubber, bent wiper arm. | Clean the blade. If streaking persists, replace the blade. Check wiper arm for proper tension. |
| Chattering/Skipping | Blade not making full contact, hardened rubber, incorrect angle. | Clean the windshield and blade. Ensure blade is installed correctly. Replace if rubber is hardened. |
| Noise (Squeaking/Screeching) | Dry windshield, dirty blade, worn blade, improper arm pressure. | Use washer fluid. Clean or replace blade. Check wiper arm for proper pressure. |
| Incomplete Wipe | Worn blade, insufficient arm pressure, wrong blade size. | Replace the blade. Verify correct blade length for your vehicle. |
6. Specifications
| Attribute | Detail |
|---|---|
| Brand | BOSCH |
| Model Number | H352 (3397011430) |
| Item Length | 14 Inches (350 mm) |
| Mounting Type | Pinch Tab (Quick-clip connections) |
| Vehicle Service Type | Car |
| Fit Type | Vehicle Specific Fit |
| Material | Natural Rubber (Specialty Coated) |
| Color | Black |
| Item Weight | 2.08 ounces |
7. Warranty and Support
Bosch wiper blades are manufactured to high standards and are designed for durability. For specific warranty information regarding your Bosch H352 Rear Wiper Blade, please refer to the warranty documentation included with your purchase or visit the official Bosch Automotive website.
For further assistance, technical support, or to explore other Bosch automotive products, please visit the official Bosch Automotive store or contact their customer service:
- Bosch Automotive Store: Visit Bosch Automotive on Amazon
- General Inquiries: Refer to the contact information provided on the Bosch global website or product packaging.
