Tripp Lite TLP615 Protect It! Surge Protector User Manual

Introduction

The Tripp Lite TLP615 Protect It! Surge Protector is designed to safeguard your valuable electronic components from damaging power surges, spikes, and disruptive line noise. This compact and cost-effective unit provides six AC outlets and 790 joules of surge suppression, ensuring your equipment performs at its peak. This manual provides essential information for the safe and effective use of your TLP615 surge protector.

Figure 1: The Tripp Lite TLP615 surge protector features six AC outlets, a master power switch, and a green 'Protected' LED indicator. Its compact design is suitable for various home and office environments.

Important Safety Instructions

Please read and follow all instructions carefully to ensure safe operation and to prevent damage to your equipment. Failure to do so may void the warranty.

• Grounding: Ensure the surge protector is plugged into a properly grounded 3-prong outlet. Do not remove the grounding prong.
• Overload Protection: The TLP615 features a 15A resettable circuit breaker. Do not overload the surge protector beyond its rated capacity (15 Amps / 1800 Watts). If the circuit breaker trips, reduce the load and reset it.
• Indoor Use Only: This device is intended for indoor use in dry locations only. Do not expose to moisture.
• Placement: Do not install this device in an ungrounded outlet. Do not use with extension cords or adapters that eliminate the grounding feature.
• Connected Equipment: Ensure all connected equipment is properly rated for use with the surge protector.
• Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Product Features

The Tripp Lite TLP615 surge protector offers a range of features designed for optimal protection and convenience:

• 6 NEMA 5-15R Outlets: Provides six standard AC outlets for connecting multiple electronic devices.
• 790 Joules Surge Suppression: Protects connected equipment from power surges and spikes.
• 15-Foot Power Cord: An extra-long cord offers flexible placement options, allowing you to reach distant wall outlets.
• Transformer-Friendly Outlet: One outlet is specifically spaced to accommodate bulky power adapters without blocking other outlets.
• EMI/RFI Line Noise Filtering: Filters out disruptive electromagnetic and radio frequency interference that can degrade component performance and corrupt data.
• "Protected" LED Indicator: A green LED illuminates to confirm that surge protection is active and functioning correctly.
• Illuminated Master Power Switch: Provides convenient one-touch control to power on or off all connected devices.
• Keyhole Mounting Slots: Integrated slots on the back panel allow for secure wall or desk mounting.

Setup and Installation

Follow these steps to set up your Tripp Lite TLP615 surge protector:

1. Unpack: Carefully remove the surge protector from its packaging.
2. Placement: Choose a suitable location for the surge protector, ensuring it is in a dry, indoor environment and within reach of a grounded wall outlet.
3. Plug In: Insert the surge protector's 15-foot power cord into a standard, grounded 3-prong AC wall outlet.
4. Connect Devices: Plug your electronic devices into the six available outlets on the surge protector. Utilize the widely spaced outlet for bulky power adapters.
5. Power On: Press the illuminated master power switch to the "ON" position. The green "Protected" LED should light up, indicating active surge protection.

Figure 2: This image demonstrates the Tripp Lite TLP615 surge protector in use, showing how multiple devices, including one with a bulky transformer, can be connected to its six outlets without obstructing adjacent ports.

Wall Mounting (Optional)

The TLP615 can be mounted to a wall or desk using its integrated keyhole slots:

1. Mark Positions: Measure the distance between the keyhole slots on the back of the surge protector. Mark these positions on your desired mounting surface.
2. Install Screws: Drive two screws (not included) into the marked positions, leaving the screw heads slightly protruding. Ensure the screws are appropriate for your mounting surface.
3. Mount: Align the keyhole slots on the back of the surge protector with the screw heads and slide the unit down to secure it in place.

Figure 3: The rear of the Tripp Lite TLP615 surge protector features keyhole slots, allowing for convenient wall or desk mounting to keep the power strip securely in place and organized.

Operation

Operating the TLP615 is straightforward:

• Power Control: Use the illuminated master power switch to turn power on or off to all connected devices simultaneously.
• "Protected" LED: The green "Protected" LED indicates that the surge suppression circuitry is active and providing protection. As long as this LED is lit, your connected equipment is protected from surges.

Maintenance

The Tripp Lite TLP615 surge protector requires minimal maintenance. Keep the unit clean and free from dust. Do not attempt to open or service the unit yourself. Refer to the troubleshooting section for common issues.

Important: If the green "Protected" LED ever goes out, it indicates that the surge suppression components have been consumed, and the unit can no longer provide surge protection. In this event, the unit should be replaced. Contact Tripp Lite for replacement information.

Troubleshooting

Specifications

• Model: TLP615
• Outlets: 6 NEMA 5-15R
• Surge Suppression: 790 Joules
• Cord Length: 15 feet (4.57 meters)
• Input Plug: NEMA 5-15P
• Voltage: 120 Volts AC
• Amperage: 15 Amps
• Circuit Breaker: 15A Resettable
• Dimensions (H x W x D): 1.8 x 5.8 x 13.2 inches (4.57 x 14.73 x 33.53 cm)
• Weight: 1.77 pounds (0.80 kg)
• Color: White
• Special Feature: Compact design, Transformer-friendly outlet
• Certifications: Conforms to UL 1449 Safety Standards

Warranty and Support

Lifetime Limited Warranty: The Tripp Lite TLP615 surge protector is backed by a Lifetime Limited Warranty, covering defects in materials and workmanship for the life of the product.

Ultimate Lifetime Insurance: For added peace of mind, this product includes $20,000 of Ultimate Lifetime Insurance coverage for connected equipment that is damaged by a power surge while properly connected to the TLP615. Refer to the official Tripp Lite warranty documentation for full terms and conditions.

Customer Support: For technical assistance, warranty claims, or product information, please visit the official Tripp Lite website or contact their customer service department. You can also refer to the official User Manual (PDF) for additional details.